Claymore's CryptoNote AMD GPU Miner v11.3

[notbatman]

^^^ the botnet BTFO is a temporary one as they have to re-tool and deploy their custom mining software while xmr-stak is ready to go for GPU miners.

[1715342881]

1715342881

[1715342881]

1715342881

[1715342881]

1715342881

[sir4o]

Hi Claymore or anybody.  
Which miner is best to mine Zero Coin on Windows using RX580 please. I have the same question please mining Hush Coin
Thanks

I'm putting in the ignore list all dump questions which suggest the person cannot think with his/her head, but the most I love is ignoring hero members.

[FFI2013]

^^^ 9.7 uses the OpenCL drivers from whatever drivers you have installed, 11.2 uses custom assembler binaries I believe.



Also I'd like to know if the new XMR algo is going to be implemented in a timely release?

Same here. I'm hoping to get my miners up and ready before the fork.

I don't know about you but I'm excited about all the ASICs and botnets getting BTFO.

I can't wait either it's about time these asic manufacturers get screwed only a few get to buy asic at a reasonable price and even those ppl are getting equipment bitmain had running for a month or two in their farm

[carlo_0000]

i upgrade to 11.2 from 10.2  but not good on my 570 speed is only half 

[air133]

When new versions with v7 algo support???

[Littlegrand]

Hi, I am getting the error dk2an0 failed -4 on all my GPU's.  It mines on 1 or 2 showing a hashrate then fails and restarts miner a short time later. I am using 6 cards, mix of 580/570s.  The rig mines no problem with other miners(sgminer etc) however I want to use Claymore for its tstop feature.  Any ideas?  I have noticed a thread to increase virtual memory but I have it set at 16gb.  Claymore eth miner works fine fyi.

********************solved******************************* 

Apparently you need a ton more virtual memory. Upped it to 48gigs and works!

Thanks,
--J

[Claymore]

When new versions with v7 algo support???

In a few days.

[cryptosize]

When new versions with v7 algo support???

In a few days.

Hey Claymore,

Are you going to support TeraScale/VLIW GPUs again?

Claymore v9.7 is the last version that works with 5xxx/6xxx cards and it doesn't support Monero v7 algo.

I wouldn't mind paying dev fees for an updated version.

[abg00]

When new versions with v7 algo support???

In a few days.

and rx550 suppurt too plz

[GrayCatt]

In a few days.

And, please, many people ask for RX550 / Polaris 12 support!

As far as I understand, Polaris 12 is to some extent similar to other Polaris architectures. And, it is very energy efficient. Adding ASM binary for RX550 will give a great boost to low-end miners.

[goodminer]

Hi Claymore,
Please tell me will your new miner support new algo for sumocoin, called cryptonigh-heavy?
Thank you forward and keep amd mining alive sir, because nvidia rules right now for most coins and algos.

[QuintLeo]

Issues with Ubuntu 14.04 -

nsgpucnminer: relocation error: /opt/Claymore10/nsgpucnminer: symbol _ZNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEC1EPKcRKS3_, version GLIBCXX_3.4.21 not defined in file libstdc++.so.6 with link time reference

14.04 is older than Jesus. Try running something made this century.

I have an issues with AMD drivers ( 13.12) on my rig (R9 270 and R7 370 cards) on Ubuntu > 14.04

My words apply again - stop using those insanely old AMD drivers...

Tell AMD to add support for clock control and undervolting in the AMDGPU drivers.
At this point, fglrx is INFINITELY better for R9 and older series cards than their AMDGPU stuff.

Also, tell AMD to SUPPORT THEIR BLOODY APU iGPUs in something newer than fglrx - 2+ years and STILL NO BLEEDING SUPPORT UNDER LINUX FOR APUS on the AMDGPU stack.

[monroexbtc]

When new versions with v7 algo support???

In a few days.

Hey Claymore,

Are you going to support TeraScale/VLIW GPUs again?

Claymore v9.7 is the last version that works with 5xxx/6xxx cards and it doesn't support Monero v7 algo.

I wouldn't mind paying dev fees for an updated version.

Hi,

There's no worries, XMR stak now fully works with TeraScale gpus. Me and a couple of other members worked hard to troubleshoot it. Please check https://www.reddit.com/r/MoneroMining/comments/882ogg/summary_and_final_guidepointers_on_how_to/

and comments at https://github.com/fireice-uk/xmr-stak/issues/472

Basically, you need to use 14.4 driver, nothing else works with Stak, and then there are some extra sweet spot intensity settings you can find if you read through what was posted Result is getting 400 h/s per core of HD 6990 on xmr stak, that is about 800 h/s + per one HD 6990, guaranteed to work with V7 monero algo.

[cryptosize]

When new versions with v7 algo support???

In a few days.

Hey Claymore,

Are you going to support TeraScale/VLIW GPUs again?

Claymore v9.7 is the last version that works with 5xxx/6xxx cards and it doesn't support Monero v7 algo.

I wouldn't mind paying dev fees for an updated version.

Hi,

There's no worries, XMR stak now fully works with TeraScale gpus. Me and a couple of other members worked hard to troubleshoot it. Please check https://www.reddit.com/r/MoneroMining/comments/882ogg/summary_and_final_guidepointers_on_how_to/

and comments at https://github.com/fireice-uk/xmr-stak/issues/472

Basically, you need to use 14.4 driver, nothing else works with Stak, and then there are some extra sweet spot intensity settings you can find if you read through what was posted Result is getting 400 h/s per core of HD 6990 on xmr stak, that is about 800 h/s + per one HD 6990, guaranteed to work with V7 monero algo.

Well, the thing is Claymore v9.7 works fine with 15.7.1 (it actually asks for 15.x Catalyst for maximum performance/compatibility)... it would be nice if the latest Claymore added TeraScale support again.

[Bulitt]

I can use xmr-stak with 15.12 drivers and HD 6950 no problem.

[Rydereee12]

just want to say thanks  Smiley

[Deepcleen]

I can use xmr-stak with 15.12 drivers and HD 6950 no problem.

How about 16.9.2?

[monroexbtc]

When new versions with v7 algo support???

In a few days.

Hey Claymore,

Are you going to support TeraScale/VLIW GPUs again?

Claymore v9.7 is the last version that works with 5xxx/6xxx cards and it doesn't support Monero v7 algo.

I wouldn't mind paying dev fees for an updated version.

Hi,

There's no worries, XMR stak now fully works with TeraScale gpus. Me and a couple of other members worked hard to troubleshoot it. Please check https://www.reddit.com/r/MoneroMining/comments/882ogg/summary_and_final_guidepointers_on_how_to/

and comments at https://github.com/fireice-uk/xmr-stak/issues/472

Basically, you need to use 14.4 driver, nothing else works with Stak, and then there are some extra sweet spot intensity settings you can find if you read through what was posted Result is getting 400 h/s per core of HD 6990 on xmr stak, that is about 800 h/s + per one HD 6990, guaranteed to work with V7 monero algo.

Well, the thing is Claymore v9.7 works fine with 15.7.1 (it actually asks for 15.x Catalyst for maximum performance/compatibility)... it would be nice if the latest Claymore added TeraScale support again.

Right, I see that, but you're missing my point. The drivers you use don't matter if it's a dedicated mining rig, and with 14.4 drivers, if you compile XMR stak from source, you can remove the dev fee, and you literally get the fastest miner for free. With those drivers and correct intensity/worksize, XMR stak outperforms claymore on terascale by 20%, plus you pay no fee.

[BSAlex]

I can use xmr-stak with 15.12 drivers and HD 6950 no problem.

No problem with how much performance actually?
You not only need to have a GPU running. The problem that next to all miners get is huge performance penalty with xmr-stak, up to 80% of hashrate loss. Please post more details about your performance results both with CCNM 9.7 and XMR-STAK
Also please elaborate on stability issue. When using 15.12 drivers I have frequent issues with tempereture sensors that stop reporting until hard reboot.

[Signaturan]

When new versions with v7 algo support???

In a few days.

Hey Claymore,

Are you going to support TeraScale/VLIW GPUs again?

Claymore v9.7 is the last version that works with 5xxx/6xxx cards and it doesn't support Monero v7 algo.

I wouldn't mind paying dev fees for an updated version.

Hi,

There's no worries, XMR stak now fully works with TeraScale gpus. Me and a couple of other members worked hard to troubleshoot it. Please check https://www.reddit.com/r/MoneroMining/comments/882ogg/summary_and_final_guidepointers_on_how_to/

and comments at https://github.com/fireice-uk/xmr-stak/issues/472

Basically, you need to use 14.4 driver, nothing else works with Stak, and then there are some extra sweet spot intensity settings you can find if you read through what was posted Result is getting 400 h/s per core of HD 6990 on xmr stak, that is about 800 h/s + per one HD 6990, guaranteed to work with V7 monero algo.

Well, the thing is Claymore v9.7 works fine with 15.7.1 (it actually asks for 15.x Catalyst for maximum performance/compatibility)... it would be nice if the latest Claymore added TeraScale support again.

Right, I see that, but you're missing my point. The drivers you use don't matter if it's a dedicated mining rig, and with 14.4 drivers, if you compile XMR stak from source, you can remove the dev fee, and you literally get the fastest miner for free. With those drivers and correct intensity/worksize, XMR stak outperforms claymore on terascale by 20%, plus you pay no fee.

Do you mean XMR stak is 20% faster than Claymore?