Claymore's CryptoNote AMD GPU Miner v11.3

[GabryRox]

btw... anyone with a Vega rig using Claymore CryptoNote miner?  if so, what kind of hashrates are your getting?  I know that some stack-XMR can supposedly get close to 2k per Vega after tweaking but hoping that this version of Claymore is close to that as I have had some issues trying to use those stack packages in the past.  if it's close, i will just stick with this miner to use on a 3x Vega 56 rig i am building this weekend.

[1714823191]

1714823191

[1714823191]

1714823191

[Kalyst69]

btw... anyone with a Vega rig using Claymore CryptoNote miner?  if so, what kind of hashrates are your getting?  I know that some stack-XMR can supposedly get close to 2k per Vega after tweaking but hoping that this version of Claymore is close to that as I have had some issues trying to use those stack packages in the past.  if it's close, i will just stick with this miner to use on a 3x Vega 56 rig i am building this weekend.

Someone already gave his settings in this topic : https://bitcointalk.org/index.php?topic=638915.msg26739857#msg26739857

[trooperx]

These cards are so random!  I've managed to get the Gigabyte RX580's up to around 890H/s.  But the new MSI Armor 580's with uber mix strap 3.1 are only pushing 818 H/s!!  I thought they would do much better.

This is a frustrating hobby!!

[MagicSmoker]

Well this is depressing... I've seen others report hashrates for the RX 570 in the 800+ range, but I am getting more like 415-425. My RX 570 has Elpida memory and the powersave rom from Anorak with core clock at 1150 and memclock at 1900 (no undervolting). GPU-Z reports 100% GPU load, 24% memory load and GPU-only power draw of 60W (at least that's fair, given the hashrate). My command line currently reads:

NsGpuCNMiner -h 850 -allpools 1 -xpool stratum+tcp://bytecoin.uk:5555 -xwal <BCN address> -xpsw x

Where "BCN address" is my actual address, of course. Claymore is setting -dmem to 1 on its own (I had set it to 1 myself) and was setting -h to 896, but I thought overriding that (with a slightly lower value) might improve things and it did, by a whopping 10 H/s.

I chose BCN to mine because it has a very low difficulty so it would be easy to see how well it is working (I'd rather mine a coin with a less sordid history, all things considered), but if this is any reflection of how ETN or XMR will mine then I don't think I'll bother.

EDIT - looking through the logs I see a lot of AMD adapter not found:

12:15:45:826   44c   ADL: Cannot find any AMD adapters

Which is strange, because it recognizes it as an Ellesmere when it starts up.

[MagicSmoker]

Well, whodathunkit, but setting -dmem 0 improved hashrate to 640; still quite a bit lower than what others are reporting, but a lot better than 420.

[Corbalin]

Guys, please help me. I've searched high and low  (including this forum) but I cannot find anyone with a similar problem.  Background:
mining cryptonight with two rx cards, 480 (4) and 580 (
both out of the box but the 480 clocked a bit.
the 480 does about 600h/s but 580 does a measly 350 h/s.
I can change the "-h" value on the 580 to get to better numbers like 600 np (will fix bios and drivers next)

Problem:
I cannot for the love of god find where to change the "-h" value when running NiceHash miner legacy v1.8.1.5
doesnt matter If I put it in  config.txt or the .bat-file of claymore or the json files of NiceHash.
please.. help?

[twofreckles]

v11 is way more stable than a previous once. Rigs going for days. Now if only the speed would get closer to competition.

[vacarosie200]

Guys, please help me. I've searched high and low  (including this forum) but I cannot find anyone with a similar problem.  Background:
mining cryptonight with two rx cards, 480 (4) and 580 (
both out of the box but the 480 clocked a bit.
the 480 does about 600h/s but 580 does a measly 350 h/s.
I can change the "-h" value on the 580 to get to better numbers like 600 np (will fix bios and drivers next)

Problem:
I cannot for the love of god find where to change the "-h" value when running NiceHash miner legacy v1.8.1.5
doesnt matter If I put it in  config.txt or the .bat-file of claymore or the json files of NiceHash.
please.. help?

settings . device/algo then select card u need to modifyand algo then place -h xxx in the Extra  launch parameter box

[Corbalin]

settings . device/algo then select card u need to modifyand algo then place -h xxx in the Extra  launch parameter box

U'r an angel, hadn't thought of looking there 
just tried it and it works now. just the rest of the problems left still.
Thanks

[GabryRox]

These cards are so random!  I've managed to get the Gigabyte RX580's up to around 890H/s.  But the new MSI Armor 580's with uber mix strap 3.1 are only pushing 818 H/s!!  I thought they would do much better.

This is a frustrating hobby!!

it does take some testing and patience to find the right mix for your rigs for sure. I was very lucky to get most of my rigs built back when MSI 470 4GB gaming GPUs were readily available for under $200. Now is a much dicier proposition due to severe shortages of most models/types of GPUs.

One thing i will mention is that there are many seasoned miners that avoid the MSI Armor series at all costs. The consensus is that while almost all other MSI cards are great for mining, the Armor line does not match up, not even for the slightly cheaper price say vs their gaming model.  This is further proven out by the fact that those Armor cards always seem to be among the last in stock when the GPU supply chain has completely gone under.

Anyway, I also thing Armor come in 4GB max, and at this point, i would recommend not buying any more 4GB cards for mining. Much better to go at least 8GB, even if you are sticking with 570/580's. Much better for future proofing.

[Bitoken]

Hello, i am trying to solo mine a cryptonight blockchain, but when i try i have some error message :

On deamonCLI :

Code:

2017-12-30 21:17:32.483 [RPC0]  ERROR   net.http        contrib/epee/include/net/http_protocol_handler.inl:360  simple_http_connection_handler<t_connection_context>::handle_invoke_query_line(): Failed to match first line:  {"method": "login", "params": {"login": "edqyfAJo5x8g5rwhsfGVsMRQd5tRZ4Eur5wAmSgzFeQ5a8UaPrZW93NQUpsNyAs5npAdfUPgQ6QA7QqAQi9oKVh52oiLxVVPi", "pass": "x", "agent": "xmr/1.0"}, "id": 1}

2017-12-30 21:17:32.483 [RPC0]  ERROR   net.http        contrib/epee/include/net/http_protocol_handler.inl:303  simple_http_connection_handler::handle_char_out: Error state!!!

Here is my bat file for claymore :

Code:

NsGpuCNMiner.exe -xpool ssl://127.0.0.1:33031 -xwal edqyfAJo5x8g5rwhsfGVsMRQd5tRZ4Eur5wAmSgzFeQ5a8UaPrZW93NQUpsNyAs5npAdfUPgQ6QA7QqAQi9oKVh52oiLxVVPi -xpsw x -allpools 1 -ttli 80 -dbg -1

I tryed with stratum+tcp but i have the same error mesage.

Someone can help me solo mine with claymore please ?

[notbatman]

^^^ You can try daemon+tcp:// but I'm not sure if Clay supports solo.

[notbatman]

Guys, please help me. I've searched high and low  (including this forum) but I cannot find anyone with a similar problem.  Background:
mining cryptonight with two rx cards, 480 (4) and 580 (
both out of the box but the 480 clocked a bit.
the 480 does about 600h/s but 580 does a measly 350 h/s.
I can change the "-h" value on the 580 to get to better numbers like 600 np (will fix bios and drivers next)

Problem:
I cannot for the love of god find where to change the "-h" value when running NiceHash miner legacy v1.8.1.5
doesnt matter If I put it in  config.txt or the .bat-file of claymore or the json files of NiceHash.
please.. help?

I'd bet you cry if you knew some folks get 1.2k H/s out of their 580.

[notbatman]

These cards are so random!  I've managed to get the Gigabyte RX580's up to around 890H/s.  But the new MSI Armor 580's with uber mix strap 3.1 are only pushing 818 H/s!!  I thought they would do much better.

This is a frustrating hobby!!

Apparently some folks don't have the compute option turned on.


edit:

I found this for all you folks who don't use Ubuntu 16.04 64-bit.

   GPU Workload

    A new toggle in Radeon Settings that can be found under the "Gaming", "Global Settings" options. This toggle will allow you to switch optimization between graphics or compute workloads on select Radeon RX 500, Radeon RX 400, Radeon R9 390, Radeon R9 380, Radeon R9 290 and Radeon R9 285 series graphics products.

    Compute Support

    Radeon Software now supports compute workloads for up to 12 installed Radeon RX 400, Radeon RX 500 or Radeon RX Vega series graphics products on Windows®10 system configurations.

-- https://overclock3d.net/news/gpu_displays/amd_adds_compute_mode_and_support_for_up_to_12_different_gpus_with_their_latest_gaming_driver/1

edit2:

I bet MS had to twist their arm to get them to do that...

[Bitoken]

^^^ You can try daemon+tcp:// but I'm not sure if Clay supports solo.

Just tryed but no, Claymore dosent reconize this code :

Code:

Cannot resolve 'daemon+tcp'
XMR: Stratum - Cannot connect to daemon+tcp:0
XMR: Stratum - Failed to connect, retry in 20 sec...

[trooperx]

These cards are so random!  I've managed to get the Gigabyte RX580's up to around 890H/s.  But the new MSI Armor 580's with uber mix strap 3.1 are only pushing 818 H/s!!  I thought they would do much better.

This is a frustrating hobby!!

it does take some testing and patience to find the right mix for your rigs for sure. I was very lucky to get most of my rigs built back when MSI 470 4GB gaming GPUs were readily available for under $200. Now is a much dicier proposition due to severe shortages of most models/types of GPUs.

One thing i will mention is that there are many seasoned miners that avoid the MSI Armor series at all costs. The consensus is that while almost all other MSI cards are great for mining, the Armor line does not match up, not even for the slightly cheaper price say vs their gaming model.  This is further proven out by the fact that those Armor cards always seem to be among the last in stock when the GPU supply chain has completely gone under.

Anyway, I also thing Armor come in 4GB max, and at this point, i would recommend not buying any more 4GB cards for mining. Much better to go at least 8GB, even if you are sticking with 570/580's. Much better for future proofing.

I have got MSI Armor 8Gb's!!  Earlier on in the thread someone said these were the better ones to get  

[MagicSmoker]

So I mined for 2 hours with Claymore and made about 12 BCN, then I mined for 2 hours with xmr-stak and made about 12 BCN... effective hashrate based on difficulty (which was surprisingly constant that entire time) comes out to around 300 H/s... compared to Claymore reporting 640 (this is after I figured out the -dmem issue) while xmr-stak is especially brazen claiming it is doing 975. What the f'ing f?

[bigbenjo]

Hi guys,
  I've an AMD Radeon R7 360 2gb.
This is my first mining test (next is to build a rig) in Windows 7 x64 fully updated.
I've installed latest Amd 17.12.2 Adrenalin driver (clean installation).
Windows Virtual Memory size is 16gb.
Stock clock/voltage.
"MYWALLET" is only for hide my real Monero Wallet

start.bat:

Code:

set GPU_FORCE_64BIT_PTR=1
set GPU_MAX_HEAP_SIZE=100
set GPU_USE_SYNC_OBJECTS=1
set GPU_MAX_ALLOC_PERCENT=100
set GPU_SINGLE_ALLOC_PERCENT=100

NsGpuCNMiner.exe -xpool stratum+tcp://xmr-eu2.nanopool.org:14444 -xwal "MYWALLET".testpc/testemail -xpsw x -tstop 85 -tt 65 -fanmin 65 -fanmax 100

log:

Code:

00:15:48:867	e34	args: -xpool stratum+tcp://xmr-eu2.nanopool.org:14444 -xwal "MYWALLET".testpc/testemail -xpsw x -tstop 85 -tt 65 -fanmin 65 -fanmax 100 
00:15:48:868	e34	
00:15:48:870	e34	ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
00:15:48:871	e34	º           Claymore's CryptoNote AMD GPU Miner v11.0            º
00:15:48:872	e34	ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
00:15:48:874	e34	
00:15:48:875	e34	b517
00:15:49:078	e34	XMR: 1 pool is specified
00:15:49:079	e34	Main Monero pool is xmr-eu2.nanopool.org:14444
00:15:49:269	e34	OpenCL platform: AMD Accelerated Parallel Processing
00:15:49:276	e34	OpenCL initializing...
00:15:49:278	e34	driver 10.0.2527.7
00:15:49:279	e34	AMD Cards available: 1 
00:15:49:281	e34	GPU #0: Bonaire, 2048 MB available, 12 compute units
00:15:49:282	e34	card 0, m1 2048, m2 1792 w 96
00:15:49:283	e34	POOL version
00:15:49:284	e34	b141 
00:15:49:286	e34	Platform: Windows
00:15:49:445	e34	No ASM binary found for GPU 0
00:15:49:831	e34	GPU #0 algorithm ASM, -h 768, -dmem 0 (Memory used: 1574MB)
00:15:49:833	e34	Total cards: 1 
00:16:04:246	e34	Watchdog enabled
00:16:04:247	e34	Remote management (READ-ONLY MODE) is enabled on port 3333
00:16:04:249	e34	

00:16:04:344	1e84	XMR: Stratum - connecting to 'xmr-eu2.nanopool.org' <92.222.180.118> port 14444 (unsecure)
00:16:04:379	1e84	send: {"method": "login", "params": {"login": ""MYWALLET".testpc/testemail: "x", "agent": "xmr/1.0"}, "id": 1}

00:16:04:381	1e84	XMR: Stratum - Connected (xmr-eu2.nanopool.org:14444) (unsecure)
00:16:04:442	1e84	got 279 bytes
00:16:04:443	1e84	buf: {"id":1,"jsonrpc":"2.0","result":{"id":"1","job":{"blob":"06069ebca0d205d7bf63c28d47e39655e9c2e72c76dbba342f73feb1683760dccb23140a0c6044000000008295bbcefa253ed045a65811c2b910bc5fbafaa28a02dfc08bcc31bc9770d53618","job_id":"31591","target":"cf8b0000"},"status":"OK"},"error":null}

00:16:04:443	1e84	parse packet: 278
00:16:04:444	1e84	new buf size: 0
00:16:07:251	e34	ADL: Cannot find any AMD adapters
00:16:10:254	e34	ADL: Cannot find any AMD adapters
00:16:13:256	e34	ADL: Cannot find any AMD adapters
00:16:16:258	e34	ADL: Cannot find any AMD adapters
00:16:19:260	e34	ADL: Cannot find any AMD adapters
00:16:22:262	e34	ADL: Cannot find any AMD adapters
00:16:25:264	e34	ADL: Cannot find any AMD adapters
00:16:28:267	e34	ADL: Cannot find any AMD adapters
00:16:31:269	e34	ADL: Cannot find any AMD adapters
00:16:34:271	e34	ADL: Cannot find any AMD adapters
00:16:34:274	e34	ADL: Cannot find any AMD adapters
00:16:34:275	e34	em hbt: 0, fm hbt: 31, 
00:16:34:275	e34	watchdog - thread 0, hb time 796
00:16:34:276	e34	watchdog - thread 1, hb time 796
00:16:34:277	e34	watchdog - thread 2, hb time 796
00:16:34:278	e34	watchdog - thread 3, hb time 796
00:16:37:280	e34	ADL: Cannot find any AMD adapters
00:16:37:825	1e84	got 243 bytes
00:16:37:826	1e84	buf: {"jsonrpc":"2.0","method":"job","params":{"blob":"0606dbbca0d205d7bf63c28d47e39655e9c2e72c76dbba342f73feb1683760dccb23140a0c604400000000fa4b7b5032d255ee5f903dd67df92165f0b447ff86f05d7a661110d9f2274ddb17","job_id":"31592","target":"cf8b0000"}}

00:16:37:826	1e84	parse packet: 242
00:16:37:827	1e84	new buf size: 0
00:16:37:829	1e84	XMR: 12/31/17-00:16:37 - New job from xmr-eu2.nanopool.org:14444
00:16:37:830	1e84	target: 0x00008bcf (diff: 120001H)
00:16:37:831	1e84	XMR - Total Speed: 0 H/s, Total Shares: 0, Rejected: 0, Time: 00:00
00:16:37:832	1e84	XMR: GPU0 0 H/s
00:16:40:282	e34	ADL: Cannot find any AMD adapters
00:16:43:284	e34	ADL: Cannot find any AMD adapters
00:16:46:287	e34	ADL: Cannot find any AMD adapters
00:16:49:289	e34	ADL: Cannot find any AMD adapters
00:16:51:061	195c	Quit...

Please, can somebody help me?
Thank you!

[ilmoro]

Hi, RX 570 owner. Tried to mine Intensecoin but the batch stops just after the start. I cannot see any info except my batch string.

NsGpuCNMiner -o stratum+tcp://intense.miningpools.us:3333 -u <wallet> -p x -allpools 1

Tried to add -dbg 1 but nothing changes, no log file has been generated.

I´m using Claymore´s Dual daily and it worked perfectly with ETH.

Any ideas?

[Bitoken]

Hi, RX 570 owner. Tried to mine Intensecoin but the batch stops just after the start. I cannot see any info except my batch string.

NsGpuCNMiner -o stratum+tcp://intense.miningpools.us:3333 -u <wallet> -p x -allpools 1

Tried to add -dbg 1 but nothing changes, no log file has been generated.

I´m using Claymore´s Dual daily and it worked perfectly with ETH.

Any ideas?

Debug files are set to 1 by default. i use

Code:

-dgb -1

to disable it