Claymore's CryptoNote AMD GPU Miner v11.3

[UnclWish]

Stop to attract to SRB miner. It unstable in hash speed as hell! To get max speed for my 580 cards I relaunch it 5-10 times. Rebuilding kernel bins is also different story...
Claymore's miners are stable as rock! Fast starting, stable speed.
Plus SRB miner slower on old 2xx and 3xx cards.
If people didn't like Claymore's miners they didn't use them.

Some people swear by one miner over another with almost religious fervour, I've used lots of different miners and use the one I feel happy with, be it Claymore, SRBminer or whatever, it sometimes comes down to a matter of individual preference, but one will never convince the fanatics - Die Heretic !

It's a matter of personal taste, some prefer the GUI of Claymore and some just don't. Personally I prefer Claymore over the others.

Yes, I too. But I force to use other miners due to Claymore stop support for CN miner.

Claymore! Return back to CN miner!

[1715547673]

1715547673

[1715547673]

1715547673

[1715547673]

1715547673

[1715547673]

1715547673

[Marvell2]

can you at least open source this @claymore so somone can add the missing kernels ?

[invicta]

I just build a new rig today, R9 280x and a fresh driver Adrenaline 18.5.2. Now this happens:

Code:

C:\Claymore>NsGpuCNMiner.exe  -pow7 1 -xpool ssl://us-east.cryptonight-hub.miningpoolhub.com:20596 -xwal account.worker -xpsw x

╔════════════════════════════════════════════════════════════════╗
║           Claymore's CryptoNote AMD GPU Miner v11.3            ║
╚════════════════════════════════════════════════════════════════╝

XMR: 2 pools are specified
Main Monero pool is us-east.cryptonight-hub.miningpoolhub.com:20596

C:\Claymore>

What might be the reason?

I tested your configuration and it run OK, no problems. Since this is a new build one thing to look out for is Windows Defender deleting 'NsGpuCNMiner.exe', as it usually does, unless added to exeptions.

I've seen that happen before but it wouldn't display all this stuff: "Claymore's CryptoNote AMD GPU Miner v11.3, XMR: 2 pools are specified", you would just get a simple 'file not found' error and the DOS window would just blink and disappear. 

[altsay]

I'm getting Access is denied error NsGpuCNMiner.exe file. Even though i'm running start.bat file on windows powershell with admin privileges

[garytheasshole]

I'm getting Access is denied error NsGpuCNMiner.exe file. Even though i'm running start.bat file on windows powershell with admin privileges

Windwos defender breaking balls most likely.

[altsay]

I'm getting Access is denied error NsGpuCNMiner.exe file. Even though i'm running start.bat file on windows powershell with admin privileges

Windwos defender breaking balls most likely.

Well yes, that was the problem.

[altsay]

Stop to attract to SRB miner. It unstable in hash speed as hell! To get max speed for my 580 cards I relaunch it 5-10 times. Rebuilding kernel bins is also different story...
Claymore's miners are stable as rock! Fast starting, stable speed.
Plus SRB miner slower on old 2xx and 3xx cards.
If people didn't like Claymore's miners they didn't use them.

My impression of Claymore is that i get 100% reject when mining Electroneum, though i'm not sure if Claymore mines it at all, otoh SRBMiner gets 100% accepted. Same card (R9 280x), same settings.

[etsRX]

Hello!

What is a good -h value for RX 570 8GB?

[UnclWish]

Hello!

What is a good -h value for RX 570 8GB?

Try 1088, 1152.

[UnclWish]

Stop to attract to SRB miner. It unstable in hash speed as hell! To get max speed for my 580 cards I relaunch it 5-10 times. Rebuilding kernel bins is also different story...
Claymore's miners are stable as rock! Fast starting, stable speed.
Plus SRB miner slower on old 2xx and 3xx cards.
If people didn't like Claymore's miners they didn't use them.

My impression of Claymore is that i get 100% reject when mining Electroneum, though i'm not sure if Claymore mines it at all, otoh SRBMiner gets 100% accepted. Same card (R9 280x), same settings.

Because Electoneum has been forked to other algo, not v7. Claymore's miner up to v7 algo support.

[4ward]

Stop to attract to SRB miner. It unstable in hash speed as hell! To get max speed for my 580 cards I relaunch it 5-10 times. Rebuilding kernel bins is also different story...
Claymore's miners are stable as rock! Fast starting, stable speed.
Plus SRB miner slower on old 2xx and 3xx cards.
If people didn't like Claymore's miners they didn't use them.

My impression of Claymore is that i get 100% reject when mining Electroneum, though i'm not sure if Claymore mines it at all, otoh SRBMiner gets 100% accepted. Same card (R9 280x), same settings.

Because Electoneum has been forked to other algo, not v7. Claymore's miner up to v7 algo support.

1. SRB is stable and faster than Claymore on rx480
2. Electroneum IS CryptonightV7
3. Claymore 11.3 works fine with "-pow7 1"

[Beyerd17]

Stop to attract to SRB miner. It unstable in hash speed as hell! To get max speed for my 580 cards I relaunch it 5-10 times. Rebuilding kernel bins is also different story...
Claymore's miners are stable as rock! Fast starting, stable speed.
Plus SRB miner slower on old 2xx and 3xx cards.
If people didn't like Claymore's miners they didn't use them.

My impression of Claymore is that i get 100% reject when mining Electroneum, though i'm not sure if Claymore mines it at all, otoh SRBMiner gets 100% accepted. Same card (R9 280x), same settings.

Because Electoneum has been forked to other algo, not v7. Claymore's miner up to v7 algo support.

1. SRB is stable and faster than Claymore on rx480
2. Electroneum IS CryptonightV7
3. Claymore 11.3 works fine with "-pow7 1"

Problem solved! Maybe your videocard has got to little videomemory to run at the settings you choose. Try to run it with lower settings.

[Call_Me_Bambi]

Hello!

What is a good -h value for RX 570 8GB?

What you could do is start at, say 992, and work your way up until you start to get rejected/stale shares then drop down to the last stable -h value.
It's recommended to use values divisable by 16 (I forget why), such as 992, 1008, 1024, etc.

[Afshin]

Driver 18.5.2  Vs. 18.6.1

5 x VEGA 64
Win10, Claymore.CryptoNote.AMD.GPU.Miner.v11.3

9237 H/s   >    9040 H/s

[yatta]

Stop to attract to SRB miner. It unstable in hash speed as hell! To get max speed for my 580 cards I relaunch it 5-10 times. Rebuilding kernel bins is also different story...
Claymore's miners are stable as rock! Fast starting, stable speed.
Plus SRB miner slower on old 2xx and 3xx cards.
If people didn't like Claymore's miners they didn't use them.

My impression of Claymore is that i get 100% reject when mining Electroneum, though i'm not sure if Claymore mines it at all, otoh SRBMiner gets 100% accepted. Same card (R9 280x), same settings.

Because Electoneum has been forked to other algo, not v7. Claymore's miner up to v7 algo support.

1. SRB is stable and faster than Claymore on rx480
2. Electroneum IS CryptonightV7
3. Claymore 11.3 works fine with "-pow7 1"

I'm getting bad hash from miner when mining ETN with -pow7 1, without it it works fine.

[Call_Me_Bambi]

Stop to attract to SRB miner. It unstable in hash speed as hell! To get max speed for my 580 cards I relaunch it 5-10 times. Rebuilding kernel bins is also different story...
Claymore's miners are stable as rock! Fast starting, stable speed.
Plus SRB miner slower on old 2xx and 3xx cards.
If people didn't like Claymore's miners they didn't use them.

My impression of Claymore is that i get 100% reject when mining Electroneum, though i'm not sure if Claymore mines it at all, otoh SRBMiner gets 100% accepted. Same card (R9 280x), same settings.

Because Electoneum has been forked to other algo, not v7. Claymore's miner up to v7 algo support.

1. SRB is stable and faster than Claymore on rx480
2. Electroneum IS CryptonightV7
3. Claymore 11.3 works fine with "-pow7 1"

I'm getting bad hash from miner when mining ETN with -pow7 1, without it it works fine.

Well that's really strange as Electroneum now uses the 'Cryptonight V7' algorithm and you should not be able to mine it without the "-pow7 1" parameter.
On which pool are you mining Electroneum, it may be mining on the old blockchain, but no pools should be doing that.

[MistShogun]

Hello im using hiveos and its using only 6300/8200 mb of each card if i add :

GPU_FORCE_64BIT_PTR 1
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100


It gives me error that is uknow option hmm can anyone know how to solve issue?

[unsivilaudio]

Hello im using hiveos and its using only 6300/8200 mb of each card if i add :

GPU_FORCE_64BIT_PTR 1
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100


It gives me error that is uknow option hmm can anyone know how to solve issue?

Those are windows options, no need to set on linux.

[smilodon]

please add rx550 lexa  card.

[Call_Me_Bambi]

please add rx550 lexa  card.

Very unlikely that that will happen, unfortunately, even updates of this current version will either be non-existant (considering it is now free of dev fees) or very very far off in the distant future. I think Claymore is concentrating on fine tuning his Ethereum miner.