Bwtmn7
Member
Offline
Activity: 109
Merit: 10
|
|
October 18, 2018, 04:17:36 PM |
|
Anyone has solved the problem when running a fresh installation of Windows 10 1809? it keeps showing this error even with V7 enabled cannot find block data: {"id":4,"jsonrpc":"2.0","result":null,"error":{"code":-1,"message":"Lowdifficultyshare"}} cannot convert blob data
|
|
|
|
CoinForgeComputingSystems
Newbie
Offline
Activity: 7
Merit: 0
|
|
October 18, 2018, 08:00:20 PM |
|
says the guy with a newbie account also.
|
|
|
|
sony87
|
|
October 18, 2018, 09:47:33 PM |
|
do we expect new version that will support the Monero fork ?
|
|
|
|
adaseb
Legendary
Offline
Activity: 3878
Merit: 1733
|
|
October 18, 2018, 11:09:21 PM |
|
If you got the Tahiti GPUs like the 7950/7970/280x the only miner I could get to work on V8 was XMR-Stak and the speeds are horrible compared to the RX/Vega GPUs.
Basically the most I can get is 400H/s while i've gotten 600H/s with V7.
|
|
|
|
sony87
|
|
October 19, 2018, 05:56:13 AM |
|
If you got the Tahiti GPUs like the 7950/7970/280x the only miner I could get to work on V8 was XMR-Stak and the speeds are horrible compared to the RX/Vega GPUs.
Basically the most I can get is 400H/s while i've gotten 600H/s with V7.
i have the same experience with 390X, dropped from 830h to 490
|
|
|
|
TripleJJJ
Newbie
Offline
Activity: 2
Merit: 0
|
|
October 19, 2018, 08:48:51 AM |
|
If you got the Tahiti GPUs like the 7950/7970/280x the only miner I could get to work on V8 was XMR-Stak and the speeds are horrible compared to the RX/Vega GPUs.
Basically the most I can get is 400H/s while i've gotten 600H/s with V7.
What type of settings were you using before to get 600H/s?
|
|
|
|
sxemini
Member
Offline
Activity: 1558
Merit: 69
|
|
October 19, 2018, 09:08:09 AM |
|
Use SRB 1.6.8 it works, speed is not fast for older cards, but enough at the moment. In 1 or 2 weeks JCE wants to release his GPU miner for V8, then i will use this miner again. At Monero V7 i switched with 2 Rigs from Claymore 11.3 to JCE, my effective Hashrate is raised from 9000 hashes to 11000 hashes.
|
|
|
|
sony87
|
|
October 19, 2018, 09:22:39 AM |
|
Use SRB 1.6.8 it works, speed is not fast for older cards, but enough at the moment. In 1 or 2 weeks JCE wants to release his GPU miner for V8, then i will use this miner again. At Monero V7 i switched with 2 Rigs from Claymore 11.3 to JCE, my effective Hashrate is raised from 9000 hashes to 11000 hashes.
i'm on SimpleMining which doesn't have SRB nor JCE miners, only xmr stack and claymore
|
|
|
|
Teezy
Newbie
Offline
Activity: 32
Merit: 0
|
|
October 19, 2018, 09:55:33 AM Last edit: October 19, 2018, 10:32:40 AM by Teezy |
|
If you got the Tahiti GPUs like the 7950/7970/280x the only miner I could get to work on V8 was XMR-Stak and the speeds are horrible compared to the RX/Vega GPUs.
Basically the most I can get is 400H/s while i've gotten 600H/s with V7.
Im using xmrig-amd-2.8.1-win64 miner for tahiti`s, i get 430-450hs average and best ones doing +500hs. Edit* v8 and crimson 15.12
|
|
|
|
gregor12
Newbie
Offline
Activity: 52
Merit: 0
|
|
October 19, 2018, 10:22:27 AM |
|
For me 280x have been doing 500h/s and the better one 550h/s on claymores, 290x at 840 h/s at total of 850W, with xmrig 280x are doing 460h/s, the best one is 500h/s and 290x at 790h/s. total usage 960W I lost about 280H/s in total, and power consumption is 110W higher. Is there any better miner for 280x/290x?
|
|
|
|
sony87
|
|
October 19, 2018, 10:37:01 AM |
|
For me 280x have been doing 500h/s and the better one 550h/s on claymores, 290x at 840 h/s at total of 850W, with xmrig 280x are doing 460h/s, the best one is 500h/s and 290x at 790h/s. total usage 960W I lost about 280H/s in total, and power consumption is 110W higher. Is there any better miner for 280x/290x?
xmrig on 290X - what config for 790 ? mine drop from 840 to half of that
|
|
|
|
ivomm
Legendary
Offline
Activity: 1888
Merit: 3081
All good things to those who wait
|
|
October 19, 2018, 04:16:38 PM |
|
For me 280x have been doing 500h/s and the better one 550h/s on claymores, 290x at 840 h/s at total of 850W, with xmrig 280x are doing 460h/s, the best one is 500h/s and 290x at 790h/s. total usage 960W I lost about 280H/s in total, and power consumption is 110W higher. Is there any better miner for 280x/290x?
xmrig on 290X - what config for 790 ? mine drop from 840 to half of that The best I achieve for 390 is between 655 and 750 H/s (xmrig, V8 wich is by default of course). For 280x 450 - 550 H/s. For 570 and 580 - 750-770 H/s. Stable for 5-6 hours so far. I guess with SRB 570 and 580 can do much better. For 280's I use intensity 920. For all others 1016. I change nothing else.
|
|
|
|
muleman8
Member
Offline
Activity: 121
Merit: 10
|
|
October 19, 2018, 08:35:33 PM |
|
|
|
|
|
adaseb
Legendary
Offline
Activity: 3878
Merit: 1733
|
|
October 19, 2018, 10:57:38 PM |
|
For me 280x have been doing 500h/s and the better one 550h/s on claymores, 290x at 840 h/s at total of 850W, with xmrig 280x are doing 460h/s, the best one is 500h/s and 290x at 790h/s. total usage 960W I lost about 280H/s in total, and power consumption is 110W higher. Is there any better miner for 280x/290x?
xmrig on 290X - what config for 790 ? mine drop from 840 to half of that The best I achieve for 390 is between 655 and 750 H/s (xmrig, V8 wich is by default of course). For 280x 450 - 550 H/s. For 570 and 580 - 750-770 H/s. Stable for 5-6 hours so far. I guess with SRB 570 and 580 can do much better. For 280's I use intensity 920. For all others 1016. I change nothing else. I've tried XMRIG also and its basically the exact hashrate (exact to the H/S pretty much) as XMR-STAK. Tried changing some parameters and it either runs 25% slower or it runs 1% faster but crashes shortly after. Probably just going to leave it as is as the daily profitability these days is not worth tweaking to get the most H/S.
|
|
|
|
tejasvi88
Newbie
Offline
Activity: 1
Merit: 0
|
|
October 20, 2018, 04:06:18 AM |
|
Is there any way to use it behind http-authenticated proxy? Uni's supercomputer requires it for internet access
|
|
|
|
sony87
|
|
October 20, 2018, 06:38:09 AM |
|
Is there any way to use it behind http-authenticated proxy? Uni's supercomputer requires it for internet access i have seen people fired for such activities so think twice before failing for few bucks...
|
|
|
|
ttelo
Newbie
Offline
Activity: 44
Merit: 0
|
|
October 20, 2018, 07:40:13 AM |
|
V8
|
|
|
|
muleman8
Member
Offline
Activity: 121
Merit: 10
|
|
October 20, 2018, 12:43:28 PM |
|
please mr claymore - please update to V8
|
|
|
|
Lucky - Luciano
|
|
October 20, 2018, 12:59:19 PM |
|
Damn, I have only 836 H/s. What settings do you use? These are my settings: { "cryptonight_type" : "normalv8", "intensity" : 96, "worksize" : 8, "double_threads" : true }
|
|
|
|
systematix
Newbie
Offline
Activity: 3
Merit: 0
|
|
October 20, 2018, 02:12:40 PM Last edit: October 20, 2018, 03:17:46 PM by systematix |
|
I get 0 h/s with my RX580 and SRB I don't have any idea .. Claymore, Claymore, Claymore
|
|
|
|
|