egroeg
Newbie
Offline
Activity: 40
Merit: 0
|
|
October 23, 2018, 06:22:15 PM Last edit: October 24, 2018, 06:36:57 AM by egroeg |
|
After 2-3 days experimenting, I can say that there are enough alternatives to Claymore's miner. With xmrig, xmr-stack and especially SRB I can achieve stable 450-500 h/s for tahiti 280 cards, 715-750 h/s for hawaii 390, and 910-930 for polaris 570 and 580 cards (with the usual bios mod and overclock as for ethereum). I don't need Claymore' s eth miner anymore also. Xmr is more profitable than eth, and with the coming reduction of the eth reward the minig of eth will be near its end. Thanks to Claymore for all his job so far, but it is time to move on! I installed all the options for mining programs on the new algorithm (Monero V8), but they all can not work for a long time, they do not work for more than an hour or two and they need to be rebooted. This has never happened during Claymore program working, which works for several weeks and even more than a month without a break and almost never turns off. So, program from Mr.Claymore can not be compared with any other program! We must all ask Mr.Claymore to write an update for his program to version v11.4 * Dear friend Mr.Claymore! We want to see the program update (CryptoNightV8, CryptoNightSaber, CryptoNightHeavy). * Thanks! Regards, George
|
|
|
|
adaseb
Legendary
Offline
Activity: 3794
Merit: 1723
|
|
October 23, 2018, 08:49:33 PM |
|
I checked the profitability between XMR and ETH and with an RX GPU is around $0.10 per day of more profit, so you are not exactly going to buy a lambo soon unless you got a warehouse full of GPUs.
Also, I agree that its more technical to mine XMR so most people stick with ETH, however the latest version of Nicehash miner supports XMR-Stak and people will config it and use it and the profitability will be equal more or less.
And I agree with the above poster, the -ttli (temp controlled intensity) is a good feature of Claymore because if one of your fans die, then it would limit the hashing speed and not cause it to overheat, and without Claymore you can't do this. You might wake up and some GPUs will run at 80-90C.
|
|
|
|
scryptr
Legendary
Offline
Activity: 1796
Merit: 1028
|
|
October 24, 2018, 03:53:59 AM |
|
I understand the reasons why Claymore stops development (he sad no time), but I dont understand why other coders cant to continue this great development. Why not share sources or find the team, who can support code, enable devfee again and all will have a profit?
CLAYMORE HALTED DEVELOPMENT-- But just a few posts back he said he would continue his work on the CryptoNote miner, and include some of the newer algorithms. In that post he said no time line.Actually all the spam posts written since then, asking for something he promised, turn my stomach. People are posting without reading the last few pages of the topic. Please mine with caution, don't spread panic about an imaginary cave-in. --scryptr
|
|
|
|
elzium
Member
Offline
Activity: 96
Merit: 10
|
|
October 24, 2018, 05:01:18 AM |
|
Maybe consume less internet if its bad for a stomach
|
|
|
|
scryptr
Legendary
Offline
Activity: 1796
Merit: 1028
|
|
October 24, 2018, 05:23:08 AM |
|
Maybe consume less internet if its bad for a stomach POLLUTE THE NET LESS-- It is just plain bad pollution. I read important threads. When I post, I try to make a valid contribution. --scryptr
|
|
|
|
systematix
Newbie
Offline
Activity: 3
Merit: 0
|
|
October 24, 2018, 09:30:23 AM |
|
After 2-3 days experimenting, I can say that there are enough alternatives to Claymore's miner. With xmrig, xmr-stack and especially SRB I can achieve stable 450-500 h/s for tahiti 280 cards, 715-750 h/s for hawaii 390, and 910-930 for polaris 570 and 580 cards (with the usual bios mod and overclock as for ethereum). I don't need Claymore' s eth miner anymore also. Xmr is more profitable than eth, and with the coming reduction of the eth reward the minig of eth will be near its end. Thanks to Claymore for all his job so far, but it is time to move on! How to do this? I have 580 and get ~600 h/s. Please, what is you miner and settings?
|
|
|
|
Mattthev
|
|
October 24, 2018, 11:13:20 AM Last edit: October 30, 2018, 08:25:13 AM by Mattthev |
|
|
|
|
|
ivomm
Legendary
Offline
Activity: 1861
Merit: 2888
All good things to those who wait
|
|
October 24, 2018, 03:20:00 PM Last edit: October 24, 2018, 09:37:42 PM by ivomm |
|
After 2-3 days experimenting, I can say that there are enough alternatives to Claymore's miner. With xmrig, xmr-stack and especially SRB I can achieve stable 450-500 h/s for tahiti 280 cards, 715-750 h/s for hawaii 390, and 910-930 for polaris 570 and 580 cards (with the usual bios mod and overclock as for ethereum). I don't need Claymore' s eth miner anymore also. Xmr is more profitable than eth, and with the coming reduction of the eth reward the minig of eth will be near its end. Thanks to Claymore for all his job so far, but it is time to move on! How to do this? I have 580 and get ~600 h/s. Please, what is you miner and settings? Windows 10, Adrenaline 18.6.1, bios mod and overclock (as high memory frequency as can - say 2170), srbminer with intensity 58 or 59. That's it. With other miners there is a trick to reach 880 h/s but not more. I am lazy to test each card, so I left them with ETH overclock, which gives around 930 h/s. I guess I can reach 950 with some optimisations, but this is not my concern now. P.S. I still can't find a pool that pays close to the calculators. So far I got 20-30% less than I should. Which pool pays the most? I think it has to be with a hashrate above 10% of the total hashrate, so that the payments are more equalized to the best possible. (Those who advertise their home pools please don't answer... Thanks, but no thanks!)
|
|
|
|
alexshir
Newbie
Offline
Activity: 1
Merit: 0
|
|
October 28, 2018, 08:57:44 PM |
|
After 2-3 days experimenting, I can say that there are enough alternatives to Claymore's miner. With xmrig, xmr-stack and especially SRB I can achieve stable 450-500 h/s for tahiti 280 cards, 715-750 h/s for hawaii 390, and 910-930 for polaris 570 and 580 cards (with the usual bios mod and overclock as for ethereum). I don't need Claymore' s eth miner anymore also. Xmr is more profitable than eth, and with the coming reduction of the eth reward the minig of eth will be near its end. Thanks to Claymore for all his job so far, but it is time to move on! Кoнчaйтe пиздeть нacчeт aльтepнaтив, иx нeт. Клэймop - лyчший! Haзoвитe мнe xoть oдин мaйнep, тaкoй жe пpocтoй в нacтpoйкax, кaк oт Клэймopa. Пpo пpибыль я нe гoвopю. A мoжeт ecть тaкиe, дa eщe бeз кoмиccии? Дaвaй, Claymor, вoзвpaщaйcя! Mы тeбя ждём!
|
|
|
|
juno111
Newbie
Offline
Activity: 3
Merit: 0
|
|
October 29, 2018, 02:06:41 AM |
|
After 2-3 days experimenting, I can say that there are enough alternatives to Claymore's miner. With xmrig, xmr-stack and especially SRB I can achieve stable 450-500 h/s for tahiti 280 cards, 715-750 h/s for hawaii 390, and 910-930 for polaris 570 and 580 cards (with the usual bios mod and overclock as for ethereum). I don't need Claymore' s eth miner anymore also. Xmr is more profitable than eth, and with the coming reduction of the eth reward the minig of eth will be near its end. Thanks to Claymore for all his job so far, but it is time to move on! Кoнчaйтe пиздeть нacчeт aльтepнaтив, иx нeт. Клэймop - лyчший! Haзoвитe мнe xoть oдин мaйнep, тaкoй жe пpocтoй в нacтpoйкax, кaк oт Клэймopa. Пpo пpибыль я нe гoвopю. A мoжeт ecть тaкиe, дa eщe бeз кoмиccии? Дaвaй, Claymor, вoзвpaщaйcя! Mы тeбя ждём! +
|
|
|
|
egroeg
Newbie
Offline
Activity: 40
Merit: 0
|
|
October 29, 2018, 05:22:17 AM |
|
I installed all the options for mining programs on the new algorithm (Monero V8), but they all can not work for a long time, they do not work for more than an hour or two and they need to be rebooted. This has never happened during Claymore program working, which works for several weeks and even more than a month without a break and almost never turns off. So, program from Mr.Claymore can not be compared with any other program! We must all ask Mr.Claymore to write an update for his program to version v11.4 * Dear friend Mr.Claymore! We want to see the program update (CryptoNightV8, CryptoNightSaber, CryptoNightHeavy). * Thanks!
Regards, George
|
|
|
|
scryptr
Legendary
Offline
Activity: 1796
Merit: 1028
|
|
October 30, 2018, 01:45:15 PM Last edit: October 31, 2018, 01:57:21 PM by scryptr |
|
CLAYMORE POSTED THAT HE WILL ADD NEWER ALGORITHMS FOR CRYPTONOTE--
The irritating posts like the shortly prior "spam campaign to Claymore" are likely one of the reasons that he gives less attention to this thread. His mining programs are well made with good features, and are good quality software. So are some of the other mining software packages for CryptoNight algorithm coins, as long as a miner is bright enough to use them. --scryptr
|
|
|
|
ivomm
Legendary
Offline
Activity: 1861
Merit: 2888
All good things to those who wait
|
|
October 31, 2018, 11:53:51 AM |
|
Actually, that's what he said in his last post here: (No mention of other algos at all, and v8 is not promissed either). Ok I can test pow8 now. But note that I does not guarantee that I will release new version or that I will do it before upcoming fork, this is free miner now and I'm not going to add any fees again, so check other miners, there are many of them.
|
|
|
|
cas333
Newbie
Offline
Activity: 52
Merit: 0
|
|
November 01, 2018, 04:23:59 PM |
|
Actually, that's what he said in his last post here: (No mention of other algos at all, and v8 is not promissed either). Ok I can test pow8 now. But note that I does not guarantee that I will release new version or that I will do it before upcoming fork, this is free miner now and I'm not going to add any fees again, so check other miners, there are many of them.
Just not respected the people that used this miner for so many years paying taxes to you. You are losing respect too with your mining softwares. Just keep it for yourself,dont worry,there are serious developers that have his promises done. Good bye forever
|
|
|
|
Mattthev
|
|
November 02, 2018, 04:44:37 PM Last edit: November 03, 2018, 06:01:02 PM by Mattthev |
|
|
|
|
|
bitwolf
|
|
November 03, 2018, 07:14:03 PM |
|
Anybody with pitcairn - 7850,7870, 270,270x? Pathetic hashrate here with every miner and even not stable (250-290h/s). It was about 400 with claymore and cn7...
|
|
|
|
JCE-Miner
Member
Offline
Activity: 350
Merit: 22
|
|
November 03, 2018, 07:38:57 PM |
|
Maybe try mine, it's specialized in older hardware (CPU and GPU). I'm mining right now at 400+ h/s with my HD7850 2G https://github.com/jceminer/cn_gpu_minerIt's almost getting annoying to read there's no decent CN miner for older hardware while my topic is on the exact same channel as this one and online for something like 6 months...
|
|
|
|
almartins
Jr. Member
Offline
Activity: 47
Merit: 2
|
|
November 04, 2018, 01:46:08 AM |
|
Maybe try mine, it's specialized in older hardware (CPU and GPU). I'm mining right now at 400+ h/s with my HD7850 2G https://github.com/jceminer/cn_gpu_minerIt's almost getting annoying to read there's no decent CN miner for older hardware while my topic is on the exact same channel as this one and online for something like 6 months... I have tried but my rigs are all in windows 7 and your miner is incompatible . Maybe is time to a OS upgrade or a GPU upgrade ...
|
|
|
|
FFI2013
|
|
November 04, 2018, 05:27:54 AM |
|
Maybe try mine, it's specialized in older hardware (CPU and GPU). I'm mining right now at 400+ h/s with my HD7850 2G https://github.com/jceminer/cn_gpu_minerIt's almost getting annoying to read there's no decent CN miner for older hardware while my topic is on the exact same channel as this one and online for something like 6 months... Just gave your miner a shot and seeing great results with 270 and 280 cards Thanks glad I seen this post
|
|
|
|
futurvision
Newbie
Offline
Activity: 1
Merit: 0
|
|
November 04, 2018, 09:21:48 AM |
|
Maybe try mine, it's specialized in older hardware (CPU and GPU). I'm mining right now at 400+ h/s with my HD7850 2G https://github.com/jceminer/cn_gpu_minerIt's almost getting annoying to read there's no decent CN miner for older hardware while my topic is on the exact same channel as this one and online for something like 6 months... Just gave your miner a shot and seeing great results with 270 and 280 cards Thanks glad I seen this post hi FFI2013, Perhaps you could share your configuration for 270? Because i'd like to test this version with my 270 2G rig for monero. thanks in advance
|
|
|
|
|