Bitcoin Forum
June 15, 2024, 04:39:02 PM *
News: Latest Bitcoin Core release: 27.0 [Torrent]
 
   Home   Help Search Login Register More  
Pages: « 1 ... 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 [472] 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 »
  Print  
Author Topic: ANTMINER S3+ Discussion and Support Thread  (Read 709842 times)
ToQcHista
Member
**
Offline Offline

Activity: 98
Merit: 10

ToQcHista


View Profile
April 27, 2015, 04:27:23 AM
 #9421

Pool setting change may not fix this.  Definitely, Pool2 and Pool3 setting are wrong, but pool 1 is correct.

If the 5 seconds average is high enough to the spec and the total average was low, it could be due to the pool connection, but when the both number are low, its the S3.

At this point, only thing we can think of that you can try is reflash the firmware to one of the older version with "DO NOT SAVE PREVIOUS SETTING"  the complete factory reset may do the trick.  Other wise, something hardware side is wrong with the miner.

If you'd like we can take a look at it for you in USA or EU, but shipping fee is probably not justifiable for you.


I have firware .

I know 2 ' 3 pool is wrong i dont need last  2 pool.



Your URL's appear to be typed wrong on last two and don't have the ports.  Is what it looks like from first glance.

Try using the ENTIRE url with the port for their server and see how it works.  I think this will fix  all your problems.
What is entire ?

" I tie a rope around my penis and jump from a tree "
notlist3d
Legendary
*
Offline Offline

Activity: 1456
Merit: 1000



View Profile
April 27, 2015, 04:36:41 AM
 #9422

Pool setting change may not fix this.  Definitely, Pool2 and Pool3 setting are wrong, but pool 1 is correct.

If the 5 seconds average is high enough to the spec and the total average was low, it could be due to the pool connection, but when the both number are low, its the S3.

At this point, only thing we can think of that you can try is reflash the firmware to one of the older version with "DO NOT SAVE PREVIOUS SETTING"  the complete factory reset may do the trick.  Other wise, something hardware side is wrong with the miner.

If you'd like we can take a look at it for you in USA or EU, but shipping fee is probably not justifiable for you.


I have firware .

I know 2 ' 3 pool is wrong i dont need last  2 pool.



Your URL's appear to be typed wrong on last two and don't have the ports.  Is what it looks like from first glance.

Try using the ENTIRE url with the port for their server and see how it works.  I think this will fix  all your problems.
What is entire ?

Just go back and copy entire thing. They look like as follows

2nd url: ".antpo" that is in no way the end of antpool server's and no port

3rd url: ".ghashi.i"  It ends in wrong ending and no port

So copy the ENTIRE pools and it should have no problem.  Your missing 1/2 of last two servers.
ToQcHista
Member
**
Offline Offline

Activity: 98
Merit: 10

ToQcHista


View Profile
April 27, 2015, 09:49:50 AM
 #9423

Pool setting change may not fix this.  Definitely, Pool2 and Pool3 setting are wrong, but pool 1 is correct.

If the 5 seconds average is high enough to the spec and the total average was low, it could be due to the pool connection, but when the both number are low, its the S3.

At this point, only thing we can think of that you can try is reflash the firmware to one of the older version with "DO NOT SAVE PREVIOUS SETTING"  the complete factory reset may do the trick.  Other wise, something hardware side is wrong with the miner.

If you'd like we can take a look at it for you in USA or EU, but shipping fee is probably not justifiable for you.


I have firware .

I know 2 ' 3 pool is wrong i dont need last  2 pool.



Your URL's appear to be typed wrong on last two and don't have the ports.  Is what it looks like from first glance.

Try using the ENTIRE url with the port for their server and see how it works.  I think this will fix  all your problems.
What is entire ?

Just go back and copy entire thing. They look like as follows

2nd url: ".antpo" that is in no way the end of antpool server's and no port

3rd url: ".ghashi.i"  It ends in wrong ending and no port

So copy the ENTIRE pools and it should have no problem.  Your missing 1/2 of last two servers.


I dont need this last 2 pool and i that this last 2 pool will remove after  will increase ghs ?

" I tie a rope around my penis and jump from a tree "
ToQcHista
Member
**
Offline Offline

Activity: 98
Merit: 10

ToQcHista


View Profile
April 27, 2015, 10:56:28 AM
 #9424

it's woles image >


" I tie a rope around my penis and jump from a tree "
notlist3d
Legendary
*
Offline Offline

Activity: 1456
Merit: 1000



View Profile
April 27, 2015, 11:43:18 AM
 #9425

it's woles image >



I do not know how to explain it any clearer then look at URL's it appears bottom two are not correct.  Go to those pools help pages and copy right one.

I have tried to help even though I think you are likely trolling it seems at this point looking back.  Please read the entire post and go get the right URL's with ports like your first one looks like.
ToQcHista
Member
**
Offline Offline

Activity: 98
Merit: 10

ToQcHista


View Profile
April 27, 2015, 11:50:41 AM
 #9426

it's woles image >



I do not know how to explain it any clearer then look at URL's it appears bottom two are not correct.  Go to those pools help pages and copy right one.

I have tried to help even though I think you are likely trolling it seems at this point looking back.  Please read the entire post and go get the right URL's with ports like your first one looks like.

 Shocked


i removed last 2 pool but anyway bad GHS is


" I tie a rope around my penis and jump from a tree "
notlist3d
Legendary
*
Offline Offline

Activity: 1456
Merit: 1000



View Profile
April 27, 2015, 11:59:11 AM
Last edit: April 27, 2015, 12:12:24 PM by notlist3d
 #9427

it's woles image >

(removed image to save space)

I do not know how to explain it any clearer then look at URL's it appears bottom two are not correct.  Go to those pools help pages and copy right one.

I have tried to help even though I think you are likely trolling it seems at this point looking back.  Please read the entire post and go get the right URL's with ports like your first one looks like.

 Shocked


i removed last 2 pool but anyway bad GHS is

(removed image to save space)

That is not necessarily a bad hash amount.  It appears to be running at default freq speed.

On default freq if you have a early bath one some achieved around 400.   Each miner has it's own personality on S3's.   It might OC nicely but reading your posts I would not look into OCing

Also remember your post's I sadly can remember because of volume you posted a S3 (It is sad amount of post's that at this point I remember setup as it's daily issues it seems), it does not get same speed as S3+.

*hurricandave gets some credit noticing one chip is not working.  So this most likely could go faster if you can get chip to working.  Hopefully it will go away with reboot, but it could be a more permanent problem.
ToQcHista
Member
**
Offline Offline

Activity: 98
Merit: 10

ToQcHista


View Profile
April 27, 2015, 12:02:58 PM
 #9428

it's woles image >

(removed image to save space)

I do not know how to explain it any clearer then look at URL's it appears bottom two are not correct.  Go to those pools help pages and copy right one.

I have tried to help even though I think you are likely trolling it seems at this point looking back.  Please read the entire post and go get the right URL's with ports like your first one looks like.

 Shocked


i removed last 2 pool but anyway bad GHS is

(removed image to save space)

That is not necessarily a bad hash amount.  It appears to be running at default freq speed.

On default freq if you have a early bath one some achieved around 400.   Each miner has it's own personality on S3's.   It might OC nicely but reading your posts I would not look into OCing

Also remember your post's I sadly can remember because of volume you posted a S3 (It is sad amount of post's that at this point I remember setup as it's daily issues it seems), it does not get same speed as S3+.

this happens when miner have default frequency ?

isn't problem ?


" I tie a rope around my penis and jump from a tree "
hurricandave
Legendary
*
Offline Offline

Activity: 966
Merit: 1003



View Profile
April 27, 2015, 12:08:49 PM
 #9429

Your hashrate dropped because one of the chips has stopped. It is the one with an X instead of an O, in the GUI.
ToQcHista
Member
**
Offline Offline

Activity: 98
Merit: 10

ToQcHista


View Profile
April 27, 2015, 12:11:17 PM
 #9430

Your hashrate dropped because one of the chips has stopped. It is the one with an X instead of an O, in the GUI.


thanks , this i undertood.


is any problem that i will overclock my s3 ?

" I tie a rope around my penis and jump from a tree "
aarons6
Legendary
*
Offline Offline

Activity: 1736
Merit: 1006


View Profile
April 27, 2015, 12:21:42 PM
 #9431

Your hashrate dropped because one of the chips has stopped. It is the one with an X instead of an O, in the GUI.


thanks , this i undertood.


is any problem that i will overclock my s3 ?

it could be a sign of a bad power supply..
if you have x's at default speed, it will get worse if you try to overclock.
ToQcHista
Member
**
Offline Offline

Activity: 98
Merit: 10

ToQcHista


View Profile
April 27, 2015, 12:27:40 PM
 #9432

Your hashrate dropped because one of the chips has stopped. It is the one with an X instead of an O, in the GUI.


thanks , this i undertood.


is any problem that i will overclock my s3 ?

it could be a sign of a bad power supply..
if you have x's at default speed, it will get worse if you try to overclock.

i have this pUS >

what will do i ?


https://www.google.com/search?client=opera&hs=uRP&biw=1920&bih=971&tbm=isch&sa=1&q=cooler+master+psu+thunder+700W&oq=cooler+master+psu+thunder+700W&gs_l=img.3...365.1092.0.1228.0.0.0.0.0.0.0.0..0.0.msedr...0...1c.1.64.img..0.0.0.aoa0h9Uxcjs#imgrc=redRjYIzK6hU8M%253A%3BbSs6hzYu8TORsM%3Bhttp%253A%252F%252Fi.ytimg.com%252Fvi%252F8v5mHcZtUKY%252Fmaxresdefault.jpg%3Bhttp%253A%252F%252Fwww.youtube.com%252Fwatch%253Fv%253D8v5mHcZtUKY%3B1920%3B1080

" I tie a rope around my penis and jump from a tree "
luthermarcus
Full Member
***
Offline Offline

Activity: 213
Merit: 100



View Profile
April 27, 2015, 01:00:17 PM
 #9433

my s3 ofter from 440GHS  350 GHS prior to drop .

why ?

We need more info.  What pool are you mining on, how often does it happen?   

Also if you could show configuration page, and status page when it happens that would help us be able to see what's happening.

As of now we cant say much to help.

Right now little is increase


It appears you did something wrong is setting up pool 2 and 3, this can explain the hashing rate loss. Anytime you have a problem connecting to pool 1, the miner will sit around and do nothing.

Also the diff on pool 1 is 1024, this mean hashrate will swing a lot. You might see hashrates of 250-650, in the 5s average. In the pic the accepts was small, so you may need to wait an hour to see what the true hashrate average is. But. fix things first.

Will remove pool 1 and pool 2 that will increase pool 1 ghs ?

lol make sure you have a live back up pool because one pool goes down an your miner thats how your losing hashs. If you simply just remove them nothing will change.

Donate Bitcoin
1Mz7ZHxPhoH1ZK2yQvo62NdHvvsS2quhzc
Donate TRX
TB3WiLEj6iuSBU5tGUKyZkjB4vqrBDvoYM
ToQcHista
Member
**
Offline Offline

Activity: 98
Merit: 10

ToQcHista


View Profile
April 27, 2015, 01:02:03 PM
 #9434

my s3 ofter from 440GHS  350 GHS prior to drop .

why ?

We need more info.  What pool are you mining on, how often does it happen?   

Also if you could show configuration page, and status page when it happens that would help us be able to see what's happening.

As of now we cant say much to help.

Right now little is increase


It appears you did something wrong is setting up pool 2 and 3, this can explain the hashing rate loss. Anytime you have a problem connecting to pool 1, the miner will sit around and do nothing.

Also the diff on pool 1 is 1024, this mean hashrate will swing a lot. You might see hashrates of 250-650, in the 5s average. In the pic the accepts was small, so you may need to wait an hour to see what the true hashrate average is. But. fix things first.

Will remove pool 1 and pool 2 that will increase pool 1 ghs ?

lol make sure you have a live back up pool because one pool goes down an your miner thats how your losing hashs. If you simply just remove them nothing will change.


how ?

" I tie a rope around my penis and jump from a tree "
luthermarcus
Full Member
***
Offline Offline

Activity: 213
Merit: 100



View Profile
April 27, 2015, 01:03:19 PM
 #9435


If the miner runs non stop turn off your miner and turn it back on to see if you still get that x

Donate Bitcoin
1Mz7ZHxPhoH1ZK2yQvo62NdHvvsS2quhzc
Donate TRX
TB3WiLEj6iuSBU5tGUKyZkjB4vqrBDvoYM
ToQcHista
Member
**
Offline Offline

Activity: 98
Merit: 10

ToQcHista


View Profile
April 27, 2015, 01:06:29 PM
 #9436



no , i turn off miner and turn on but same ghs

" I tie a rope around my penis and jump from a tree "
notlist3d
Legendary
*
Offline Offline

Activity: 1456
Merit: 1000



View Profile
April 27, 2015, 01:22:20 PM
 #9437

If the miner runs non stop turn off your miner and turn it back on to see if you still get that x
no , i turn off miner and turn on but same ghs

But when it comes back does it still have the X on the one chip?  That is what really matters. (I cleaned up post so not so large)
ToQcHista
Member
**
Offline Offline

Activity: 98
Merit: 10

ToQcHista


View Profile
April 27, 2015, 01:32:45 PM
 #9438

If the miner runs non stop turn off your miner and turn it back on to see if you still get that x
no , i turn off miner and turn on but same ghs

But when it comes back does it still have the X on the one chip?  That is what really matters. (I cleaned up post so not so large)


what is X ?

" I tie a rope around my penis and jump from a tree "
notlist3d
Legendary
*
Offline Offline

Activity: 1456
Merit: 1000



View Profile
April 27, 2015, 01:34:37 PM
 #9439

If the miner runs non stop turn off your miner and turn it back on to see if you still get that x
no , i turn off miner and turn on but same ghs

But when it comes back does it still have the X on the one chip?  That is what really matters. (I cleaned up post so not so large)


what is X ?

On the asic status at bottom right.  It's next to **temperature.  If you cant find it just upload image.

You are starting to look spammy again just a FYI.
ToQcHista
Member
**
Offline Offline

Activity: 98
Merit: 10

ToQcHista


View Profile
April 27, 2015, 01:39:53 PM
 #9440

If the miner runs non stop turn off your miner and turn it back on to see if you still get that x
no , i turn off miner and turn on but same ghs

But when it comes back does it still have the X on the one chip?  That is what really matters. (I cleaned up post so not so large)


what is X ?

On the asic status at bottom right.  It's next to signature.  If you cant find it just upload image.

You are starting to look spammy again just a FYI.

What are it X doing?

" I tie a rope around my penis and jump from a tree "
Pages: « 1 ... 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 [472] 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 »
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!