jonnybravo0311
Legendary
Offline
Activity: 1344
Merit: 1024
Mine at Jonny's Pool
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 15, 2014, 12:58:09 PM |
|
So I need some help here peoples. I do fly in fly out work with a 3 week on roster. So im going to be away from home when the miners arrive. My girl is home but is absolutely computer illiterate. I have setup the power supply ready for when they arrive with labelling for which cables go where so she can just plug them in. But as far as setting it up goes would i be able to setup the miners remotely with teamviewer with another computer set up at home? Reading about the S1 seems the internet has to be disconnected and then connect the compter directly to the miner. Is this true with the s3 do you think? Does anyone have any ideas how I could set up the miners remotely? Thanks ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) To answer your question would require a bit of knowledge about your home's network. Are you running a 192.168.1.* system, or are you using something else? I am guessing (and this is going on Bitmain's usage of that network in the S1 and S2) that the S3 will follow the same pattern and use that type of address. Assuming that Bitmain continues to use the 192.168.1.* addresses, and your home network is on that same network, then using Teamviewer to setup the miners remotely shouldn't be a big deal at all. My home network uses 192.168.2.* Is that configurable? Could I just change the router to assign the DHCP setting to 192.168.1.*? Absolutely. Changing your network is usually pretty easy to do in your router's config.
|
Jonny's Pool - Mine with us and help us grow! Support a pool that supports Bitcoin, not a hardware manufacturer's pockets! No SPV cheats. No empty blocks.
|
|
|
spazzdla
Legendary
Offline
Activity: 1722
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 15, 2014, 01:25:45 PM |
|
Coupon.. refund.. shipping..
Hum why do I have 4 S3 coupons and and 4 S2 coupons..? Something about being a B1 customer for the S3..?
The S3 will still be shipping out at somepoint I assume...? This 7.5% refund isn't going to cancel my order if I take it will it...?!
|
|
|
|
hurricandave
Legendary
Offline
Activity: 966
Merit: 1003
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 15, 2014, 01:29:25 PM |
|
Unfortunately I don't have another network card ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) [/quote] Screen Shots and Print. Screen Shots and Print. Get the ol'cell phony batts fully charged and walker thru it!
|
|
|
|
spazzdla
Legendary
Offline
Activity: 1722
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 15, 2014, 01:30:37 PM |
|
Hello everyone,
When we were doing the first mass production, we found that not all of the S3’s DC/DC module could be stable enough to support the 478GH/s speed. After long time testing, all of the S3 run stably at 441GH/s, which however is 7.7% less than the 478GH/s we have announced.
So we decide the final specification of ANTMINER S3 here:
Hash Rate: 441 GH/s or more Power Consumption: about 340 Watt at the wall when running at 441GH/s Power Efficiency: 0.77 J/GH on wall Power Supply: 12V DC Size: 331 mm x 137 mm x 160 mm Fans: Two 14038 fans mounted on both front and back ends. Operating Temperature: 0 °C to 35 °C Complied with: FCC / CE Network Connection: Ethernet
Many of the customers may be lucky to find that their S3 can be overclocked to 478GH/s.
We apologize for this incident. We offer two options for customers:
1) 10.0% worth of coupon for the B1~B3 customers. This is the default option. (10% based on what you have paid for the B1~B3) 2) 7.7% worth of refund. We will release a function on our official website for application of this option. If you have bought from our resellers, please contact them and provide your Bitcoin address.
Shipping schedule updated:
Batch 1: The shipping will be finished in 14th and 17th. Batch 2: It will be shipping out between 18th and 19th. Batch 3: It will be shipping out between 19th and 22nd.
Ahh okay, sweet. I am gonna take la "refund"
|
|
|
|
dlowings
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 15, 2014, 01:32:10 PM |
|
Coupon.. refund.. shipping..
Hum why do I have 4 S3 coupons and and 4 S2 coupons..? Something about being a B1 customer for the S3..?
The S3 will still be shipping out at somepoint I assume...? This 7.5% refund isn't going to cancel my order if I take it will it...?!
if your not going to use a S2 coupon send one my way… bitmain account dlowings… thanks
|
BTC donations welcome:- 1BrersvQubEKt4m2hBXDNvU1B4RiYe6J4i - Feel free to visit wiki.chainminer.com for free hardware listings, and mining info. - IRC on freenode #wiki.chainminer.com
|
|
|
spazzdla
Legendary
Offline
Activity: 1722
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 15, 2014, 01:34:24 PM |
|
Coupon.. refund.. shipping..
Hum why do I have 4 S3 coupons and and 4 S2 coupons..? Something about being a B1 customer for the S3..?
The S3 will still be shipping out at somepoint I assume...? This 7.5% refund isn't going to cancel my order if I take it will it...?!
if your not going to use a S2 coupon send one my way… bitmain account dlowings… thanks I took the refund.. I assume this cancels my S2 coupon..?
|
|
|
|
dlowings
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 15, 2014, 01:36:10 PM |
|
Coupon.. refund.. shipping..
Hum why do I have 4 S3 coupons and and 4 S2 coupons..? Something about being a B1 customer for the S3..?
The S3 will still be shipping out at somepoint I assume...? This 7.5% refund isn't going to cancel my order if I take it will it...?!
if your not going to use a S2 coupon send one my way… bitmain account dlowings… thanks I took the refund.. I assume this cancels my S2 coupon..? well if it didn't, try to send one my way with the donate feature .
|
BTC donations welcome:- 1BrersvQubEKt4m2hBXDNvU1B4RiYe6J4i - Feel free to visit wiki.chainminer.com for free hardware listings, and mining info. - IRC on freenode #wiki.chainminer.com
|
|
|
TheFridge
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 15, 2014, 02:17:04 PM |
|
So I need some help here peoples. I do fly in fly out work with a 3 week on roster. So im going to be away from home when the miners arrive. My girl is home but is absolutely computer illiterate. I have setup the power supply ready for when they arrive with labelling for which cables go where so she can just plug them in. But as far as setting it up goes would i be able to setup the miners remotely with teamviewer with another computer set up at home? Reading about the S1 seems the internet has to be disconnected and then connect the compter directly to the miner. Is this true with the s3 do you think? Does anyone have any ideas how I could set up the miners remotely? Thanks ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) To answer your question would require a bit of knowledge about your home's network. Are you running a 192.168.1.* system, or are you using something else? I am guessing (and this is going on Bitmain's usage of that network in the S1 and S2) that the S3 will follow the same pattern and use that type of address. Assuming that Bitmain continues to use the 192.168.1.* addresses, and your home network is on that same network, then using Teamviewer to setup the miners remotely shouldn't be a big deal at all. My home network uses 192.168.2.* Is that configurable? Could I just change the router to assign the DHCP setting to 192.168.1.*? Absolutely. Changing your network is usually pretty easy to do in your router's config. Thanks for the help. Network has been changed to 192.168.1.* Had to re-cycle all the devices on the network to get them going but were all sweet now ![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
|
|
|
|
bcollan
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 69
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 15, 2014, 02:17:40 PM |
|
Coupon.. refund.. shipping..
Hum why do I have 4 S3 coupons and and 4 S2 coupons..? Something about being a B1 customer for the S3..?
The S3 will still be shipping out at somepoint I assume...? This 7.5% refund isn't going to cancel my order if I take it will it...?!
if your not going to use a S2 coupon send one my way… bitmain account dlowings… thanks Same here!
|
|
|
|
Moria843
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 442
Merit: 250
Found Lost beach - quiet now
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 15, 2014, 02:29:58 PM |
|
Patience, grasshopper ![Cool](https://bitcointalk.org/Smileys/default/cool.gif) It's a beautiful day today. I'm on my deck enjoying a beer and a cig while my S1s, that have already paid for themselves, continue hashing along still making money. Am I the only one waiting for the dust to settle?
|
Hot time, summer in the city, back of my mine getting hot & gritty!!!
|
|
|
jonnybravo0311
Legendary
Offline
Activity: 1344
Merit: 1024
Mine at Jonny's Pool
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 15, 2014, 02:35:34 PM |
|
So I need some help here peoples. I do fly in fly out work with a 3 week on roster. So im going to be away from home when the miners arrive. My girl is home but is absolutely computer illiterate. I have setup the power supply ready for when they arrive with labelling for which cables go where so she can just plug them in. But as far as setting it up goes would i be able to setup the miners remotely with teamviewer with another computer set up at home? Reading about the S1 seems the internet has to be disconnected and then connect the compter directly to the miner. Is this true with the s3 do you think? Does anyone have any ideas how I could set up the miners remotely? Thanks ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) To answer your question would require a bit of knowledge about your home's network. Are you running a 192.168.1.* system, or are you using something else? I am guessing (and this is going on Bitmain's usage of that network in the S1 and S2) that the S3 will follow the same pattern and use that type of address. Assuming that Bitmain continues to use the 192.168.1.* addresses, and your home network is on that same network, then using Teamviewer to setup the miners remotely shouldn't be a big deal at all. My home network uses 192.168.2.* Is that configurable? Could I just change the router to assign the DHCP setting to 192.168.1.*? Absolutely. Changing your network is usually pretty easy to do in your router's config. Thanks for the help. Network has been changed to 192.168.1.* Had to re-cycle all the devices on the network to get them going but were all sweet now ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) As was posted above... take some screenshots and print them out. Show your girl how to handle making the changes to the router in the off chance that the S3s come with a different address range. This way, you can call her from the road and walk her through the process should it be necessary. My guess is that Bitmain will stick with the 192.168.1.* range. Also, make sure you have statically assigned IPs for your current miners so there isn't a conflict. Do something like 192.168.1.201-210 depending on how may miners you currently have hashing away.
|
Jonny's Pool - Mine with us and help us grow! Support a pool that supports Bitcoin, not a hardware manufacturer's pockets! No SPV cheats. No empty blocks.
|
|
|
allcoinminer
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 15, 2014, 02:49:49 PM |
|
So I need some help here peoples. I do fly in fly out work with a 3 week on roster. So im going to be away from home when the miners arrive. My girl is home but is absolutely computer illiterate. I have setup the power supply ready for when they arrive with labelling for which cables go where so she can just plug them in. But as far as setting it up goes would i be able to setup the miners remotely with teamviewer with another computer set up at home? Reading about the S1 seems the internet has to be disconnected and then connect the compter directly to the miner. Is this true with the s3 do you think? Does anyone have any ideas how I could set up the miners remotely? Thanks ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) To answer your question would require a bit of knowledge about your home's network. Are you running a 192.168.1.* system, or are you using something else? I am guessing (and this is going on Bitmain's usage of that network in the S1 and S2) that the S3 will follow the same pattern and use that type of address. Assuming that Bitmain continues to use the 192.168.1.* addresses, and your home network is on that same network, then using Teamviewer to setup the miners remotely shouldn't be a big deal at all. My home network uses 192.168.2.* Is that configurable? Could I just change the router to assign the DHCP setting to 192.168.1.*? It depends on how bitmain configured the miner IPs. Check with bitmain via their support email. Also you can guide you girl to do that for your if you can arrange a laptop or another system and a webcam. Or even via a phone's video calling.
|
|
|
|
chadbu
Newbie
Offline
Activity: 28
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 15, 2014, 02:51:45 PM |
|
shipping has started!!!
|
|
|
|
contactlight
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 15, 2014, 02:53:23 PM |
|
shipping has started!!!
How do you know?
|
|
|
|
oskuro
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 15, 2014, 02:54:16 PM |
|
shipping has started!!!
Evidence?
|
|
|
|
Airwhale
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 15, 2014, 03:01:10 PM |
|
I can confirm shipping. I'm running out the door, so I don't have time to take and mod a screenshot, but my.ups tells me that my B1 S3s should be here(west coast USA) on Thursday. my.ups is telling me that the order is ready for pickup, so it might end up being Friday.
In the past, when bitmain has been particularly swamped, the shipped notification on the website has been a little bit slower to update.
|
|
|
|
bolehvpn
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 15, 2014, 03:03:45 PM |
|
![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fimgur.com%2FNV3NkBV&t=665&c=sluRmp8poSNvOQ) From my side, I was one of the first ones to purchase within a few minutes for Batch 1 but do not see a shipping update.
|
BolehVPN [Offshore, no log VPN|Accepts BTC, DASH and XEM]
|
|
|
Collider
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 15, 2014, 03:05:29 PM |
|
I have a second minute batch 1 order and I haven´t received tracking yet, so I doubt they have shipped in quantity yet.
However, it does take some time to update all the tracking info, so I might be wrong.
Does it only show shipping on myups? That could also mean that they just printed the label.....
|
|
|
|
dulac97
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 78
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 15, 2014, 03:08:05 PM |
|
![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fimgur.com%2FNV3NkBV&t=665&c=sluRmp8poSNvOQ) From my side, I was one of the first ones to purchase within a few minutes for Batch 1 but do not see a shipping update. I second that.
|
|
|
|
dropt
Legendary
Offline
Activity: 1512
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 15, 2014, 03:13:56 PM |
|
Does anyone else realize it is 11:00pm in China right now.. nothing is moving at the moment.
Maybe. I know that the last few shipments I've received from Bitmain were almost always picked up around 11PM China time. YMMV.
|
|
|
|
|