[ANN][BURST] Burst | Efficient HDD Mining | New 1.2.3 Fork block 92000

[HoldTheLine]

Sorry, a bit late to the game on this one.

Is this coin still worth mining for someone with around 500 meg hdd space?

Is it difficult to setup this mining?

How many coins can be expected per day with this much space now?

Thanks!

Absolutely not. It wasn't worth mining 3 weeks ago with 500MB.

Just go an buy a few quids worth on C cex.

Hey thanks man for your reply, I was kinda getting that feeling reading through some of these pages.  Too bad I missed the start on this one.  Will def grab some off of C-Cex.

Thanks again!

You are very welcome my brother! It's dirt cheap at the moment and will only go up in value over time as more and more people catch on.

Best of luck!

[cyberspacemonkey]

Is there a decent pool that I can join that won't give me the "Error: Failed to submit nonce" message?  I've tried both uray's pools and give me the same crap. Any alternatives? 

[IncludeBeer]

Wanted to share my results:

gpuPlotGenerator generate 0 0 G:\pocminer_pool_v2\plots account 21621000 204800 1024 128 256

This gets me ~3k nonces/min on my GTX 460m with v2.1 that has the kernel mod in it.  Before the mod, I was getting ~1100 n/m.

I had to underclock it a bit cuz temps were getting up to 93ish.

[IncludeBeer]

I just plugged in a second Seagate Backup+ but it doesn't show up as a drive in windows explorer.  I looked it up on device manager, and it shows all 3 externals, including the new one, so I know windows is recognizing it.  Anyone have any ideas how I can get this to work?  Thanks!

Edit: I just plugged it into another comp: same results.  Windows says it successfully installed the drivers for it, so why can't I use it?  DOA?

[go6ooo1212]

Does the gpuplotgen2.1.0... work properly with 14.*** drivers, because the ver. 2.0.1 generates plots that give huge value deadlines too...

[SpeedDemon13]

I just plugged in a second Seagate Backup+ but it doesn't show up as a drive in windows explorer.  I looked it up on device manager, and it shows all 3 externals, including the new one, so I know windows is recognizing it.  Anyone have any ideas how I can get this to work?  Thanks!

Edit: I just plugged it into another comp: same results.  Windows says it successfully installed the drivers for it, so why can't I use it?  DOA?

You might need to go into Windows "Disk Management" and see if the drive is online/formatted properly.

[SpeedDemon13]

Does the gpuplotgen2.1.0... work properly with 14.*** drivers, because the ver. 2.0.1 generates plots that give huge value deadlines too...

No one has reported if it works fine or not yet. You can give it a try and see if it does.

[fanepatent]

GPU plot generator v2.1.0

Changelog:
- Enhanced kernel. Thanks to "burstcoin" for his great work on that part.

Windows x86 binaries: https://mega.co.nz/#!aVNXzIhB!Obq7E_Nob0v6SHn8KheIiTlNwT6G9yN4cEmBXadUQZc
Sources: https://mega.co.nz/#!yU8GQAqa!7YG8G8Z1UqudnYIhj79JY-Y8uVpVMiPV4v0lFHYEWEs

I made some modifications in the kernel too. Please check that my modifications don't lower the performances (it shouldn't, but let's be cautious).
Also, as this is a brand new kernel, the AMD 14.4 issue may be corrected as a side effect. I would really apreciate a feedback on that point.

the Mega link is not working for me Working now

Also thought i would add my plotting speeds for my 7950 (with a pretty decent overclock)
was getting 14k on v2.0.0
now getting 27k on v2.0.1 with the kernel mod posted by burstcoin
using 4080Stagger 256Threads 8160Hashes
Still only uses 64% usage of the GPU at best aswell.

[timk225]

Got a problem with the GPU miner.  It says it generated a plot file, but it didn't.

I had 1.24 TB of free space on a 3 TB drive, and I got this 2.0.1 plotter working last night.  It seemed to be doing fine.  I came home this evening after work, and checked the drive..... and it still has 1.24 TB of free space after the GPU plotter appeared to successfully complete plotting 5,200,000 plots for me!  

What the FCUK?

The "plots" folder in the GPU plotter has nothing in it.

From the command line window in the directions on page 459, here's my code to get the plotter plotting:

gpuPlotGenerator.exe generate 0 0 "D:\GPUPLOTGENERATOR\gpuPlotGenerator-bin-win-x86-2.0.1\plots" HERE IS MY ACCOUNT NUMBER 60000000 5200000 1024 64 2048

So what the hell did it spend 8 hours generating?  Where's the file?  It's not on my C drive, the C drive is nowhere near big enough to take this plot file that should've mostly filled a 1.24 GB free space.

I am not happy.

[SpeedDemon13]

GPU plot generator v2.1.0

Changelog:
- Enhanced kernel. Thanks to "burstcoin" for his great work on that part.

Windows x86 binaries: https://mega.co.nz/#!aVNXzIhB!Obq7E_Nob0v6SHn8KheIiTlNwT6G9yN4cEmBXadUQZc
Sources: https://mega.co.nz/#!yU8GQAqa!7YG8G8Z1UqudnYIhj79JY-Y8uVpVMiPV4v0lFHYEWEs

I made some modifications in the kernel too. Please check that my modifications don't lower the performances (it shouldn't, but let's be cautious).
Also, as this is a brand new kernel, the AMD 14.4 issue may be corrected as a side effect. I would really apreciate a feedback on that point.

the Mega link is not working for me Working now

Also thought i would add my plotting speeds for my 7950 (with a pretty decent overclock)
was getting 14k on v2.0.0
now getting 27k on v2.0.1 with the kernel mod posted by burstcoin
using 4080Stagger 256Threads 8160Hashes
Still only uses 64% usage of the GPU at best aswell.

What gpu are you running that with ~64k nonce/min? AMD 14.x driver too?

[fanepatent]

GPU plot generator v2.1.0

Changelog:
- Enhanced kernel. Thanks to "burstcoin" for his great work on that part.

Windows x86 binaries: https://mega.co.nz/#!aVNXzIhB!Obq7E_Nob0v6SHn8KheIiTlNwT6G9yN4cEmBXadUQZc
Sources: https://mega.co.nz/#!yU8GQAqa!7YG8G8Z1UqudnYIhj79JY-Y8uVpVMiPV4v0lFHYEWEs

I made some modifications in the kernel too. Please check that my modifications don't lower the performances (it shouldn't, but let's be cautious).
Also, as this is a brand new kernel, the AMD 14.4 issue may be corrected as a side effect. I would really apreciate a feedback on that point.

the Mega link is not working for me Working now

Also thought i would add my plotting speeds for my 7950 (with a pretty decent overclock)
was getting 14k on v2.0.0
now getting 27k on v2.0.1 with the kernel mod posted by burstcoin
using 4080Stagger 256Threads 8160Hashes
Still only uses 64% usage of the GPU at best aswell.

What gpu are you running that with ~64k nonce/min? AMD 14.x driver too?

280x, 14.7 drivers

[SpeedDemon13]

GPU plot generator v2.1.0

Changelog:
- Enhanced kernel. Thanks to "burstcoin" for his great work on that part.

Windows x86 binaries: https://mega.co.nz/#!aVNXzIhB!Obq7E_Nob0v6SHn8KheIiTlNwT6G9yN4cEmBXadUQZc
Sources: https://mega.co.nz/#!yU8GQAqa!7YG8G8Z1UqudnYIhj79JY-Y8uVpVMiPV4v0lFHYEWEs

I made some modifications in the kernel too. Please check that my modifications don't lower the performances (it shouldn't, but let's be cautious).
Also, as this is a brand new kernel, the AMD 14.4 issue may be corrected as a side effect. I would really apreciate a feedback on that point.

the Mega link is not working for me Working now

Also thought i would add my plotting speeds for my 7950 (with a pretty decent overclock)
was getting 14k on v2.0.0
now getting 27k on v2.0.1 with the kernel mod posted by burstcoin
using 4080Stagger 256Threads 8160Hashes
Still only uses 64% usage of the GPU at best aswell.

What gpu are you running that with ~64k nonce/min? AMD 14.x driver too?

280x, 14.7 drivers

OC'ed or stock clocks? How's the deadline times?

[fanepatent]

GPU plot generator v2.1.0

Changelog:
- Enhanced kernel. Thanks to "burstcoin" for his great work on that part.

Windows x86 binaries: https://mega.co.nz/#!aVNXzIhB!Obq7E_Nob0v6SHn8KheIiTlNwT6G9yN4cEmBXadUQZc
Sources: https://mega.co.nz/#!yU8GQAqa!7YG8G8Z1UqudnYIhj79JY-Y8uVpVMiPV4v0lFHYEWEs

I made some modifications in the kernel too. Please check that my modifications don't lower the performances (it shouldn't, but let's be cautious).
Also, as this is a brand new kernel, the AMD 14.4 issue may be corrected as a side effect. I would really apreciate a feedback on that point.

the Mega link is not working for me Working now

Also thought i would add my plotting speeds for my 7950 (with a pretty decent overclock)
was getting 14k on v2.0.0
now getting 27k on v2.0.1 with the kernel mod posted by burstcoin
using 4080Stagger 256Threads 8160Hashes
Still only uses 64% usage of the GPU at best aswell.

What gpu are you running that with ~64k nonce/min? AMD 14.x driver too?

280x, 14.7 drivers

OC'ed or stock clocks? How's the deadline times?

Gigabyte's oc'd version, but with the clocks that came. I haven't checked the deadlines yet. I think its not generated properly.... But we will see

[SpeedDemon13]

GPU plot generator v2.1.0

Changelog:
- Enhanced kernel. Thanks to "burstcoin" for his great work on that part.

Windows x86 binaries: https://mega.co.nz/#!aVNXzIhB!Obq7E_Nob0v6SHn8KheIiTlNwT6G9yN4cEmBXadUQZc
Sources: https://mega.co.nz/#!yU8GQAqa!7YG8G8Z1UqudnYIhj79JY-Y8uVpVMiPV4v0lFHYEWEs

I made some modifications in the kernel too. Please check that my modifications don't lower the performances (it shouldn't, but let's be cautious).
Also, as this is a brand new kernel, the AMD 14.4 issue may be corrected as a side effect. I would really apreciate a feedback on that point.

the Mega link is not working for me Working now

Also thought i would add my plotting speeds for my 7950 (with a pretty decent overclock)
was getting 14k on v2.0.0
now getting 27k on v2.0.1 with the kernel mod posted by burstcoin
using 4080Stagger 256Threads 8160Hashes
Still only uses 64% usage of the GPU at best aswell.

What gpu are you running that with ~64k nonce/min? AMD 14.x driver too?

280x, 14.7 drivers

OC'ed or stock clocks? How's the deadline times?

Gigabyte's oc'd version, but with the clocks that came. I haven't checked the deadlines yet. I think its not generated properly.... But we will see

Just hope that it doesn't have the prior issues with the 14.x drivers. I'm tempted to try it on one of my rigs with 12TB in it.

[bipben]

GPU plot generator v2.1.0

Changelog:
- Enhanced kernel. Thanks to "burstcoin" for his great work on that part.

Windows x86 binaries: https://mega.co.nz/#!aVNXzIhB!Obq7E_Nob0v6SHn8KheIiTlNwT6G9yN4cEmBXadUQZc
Sources: https://mega.co.nz/#!yU8GQAqa!7YG8G8Z1UqudnYIhj79JY-Y8uVpVMiPV4v0lFHYEWEs

I made some modifications in the kernel too. Please check that my modifications don't lower the performances (it shouldn't, but let's be cautious).
Also, as this is a brand new kernel, the AMD 14.4 issue may be corrected as a side effect. I would really apreciate a feedback on that point.

Great work! I've sent you some BURST

Thank you for your support

[kev7112001]

my mine.bat sometimes crashes and closes itself. Any ideas how to re-run this program automatically after it crashes ?

That would be a nice option to have and hope this will be add in the near future.

Actually i have that problem in windows think there is a memory leak cause it fills up and crashes no matter what u set the mem to be in the miners

so for that problem i used a program called restarter it will monitor every so many seconds what ever u set to see if its running if not is will restart the prgram if u use it though make sure u select the process from the top and in the working directory use the file path to the miner

link:
http://www.knas.se/Applications/Restarter.aspx

[Yanakitu Tenatako]

I have spare 1,5TB drive. Connected and NTFS formated.

Also dl-ed wallet and sync-ed. Now, what is plot and how to start pool mining?
I want to use complete spare disk for that.

Tnx.

[bipben]

GPU plot generator v2.1.0

Changelog:
- Enhanced kernel. Thanks to "burstcoin" for his great work on that part.

Windows x86 binaries: https://mega.co.nz/#!aVNXzIhB!Obq7E_Nob0v6SHn8KheIiTlNwT6G9yN4cEmBXadUQZc
Sources: https://mega.co.nz/#!yU8GQAqa!7YG8G8Z1UqudnYIhj79JY-Y8uVpVMiPV4v0lFHYEWEs

I made some modifications in the kernel too. Please check that my modifications don't lower the performances (it shouldn't, but let's be cautious).
Also, as this is a brand new kernel, the AMD 14.4 issue may be corrected as a side effect. I would really apreciate a feedback on that point.

rename shabal.cl to shabal2.cl

Erf, sorry for that. I was in the middle of testing it and forgot to change the #include.

------

GPU plot generator v2.1.1

Changelog:
- Shabal include corrected.

Windows x86 binaries: https://mega.co.nz/#!HMEUHKAL!WQuhun7OlODiV1VvxJv5GHjPo9MsccfyuubQgJEAUYU
Sources: https://mega.co.nz/#!7VExxQ7Z!EoUPH_XzXEFQXnQ41XQ6fiHjMfnXpR9HdxUztmPaeH8

[Amph]

is the last gpu plotter(2.1) working with nvidia? 750ti especially?

[SpeedDemon13]

GPU plot generator v2.1.0

Changelog:
- Enhanced kernel. Thanks to "burstcoin" for his great work on that part.

Windows x86 binaries: https://mega.co.nz/#!aVNXzIhB!Obq7E_Nob0v6SHn8KheIiTlNwT6G9yN4cEmBXadUQZc
Sources: https://mega.co.nz/#!yU8GQAqa!7YG8G8Z1UqudnYIhj79JY-Y8uVpVMiPV4v0lFHYEWEs

I made some modifications in the kernel too. Please check that my modifications don't lower the performances (it shouldn't, but let's be cautious).
Also, as this is a brand new kernel, the AMD 14.4 issue may be corrected as a side effect. I would really apreciate a feedback on that point.

rename shabal.cl to shabal2.cl

Erf, sorry for that. I was in the middle of testing it and forgot to change the #include.

------

GPU plot generator v2.1.1

Changelog:
- Shabal include corrected.

Windows x86 binaries: https://mega.co.nz/#!HMEUHKAL!WQuhun7OlODiV1VvxJv5GHjPo9MsccfyuubQgJEAUYU
Sources: https://mega.co.nz/#!7VExxQ7Z!EoUPH_XzXEFQXnQ41XQ6fiHjMfnXpR9HdxUztmPaeH8

Is the issue with AMD 14.x driver resolved in this release? Are Nvidia cards supported better in this release? Thanks for all the hard work.