[ANN][BURST] Burst | Efficient HDD Mining | New 1.2.3 Fork block 92000

[burstcoin]

Is the dev still active here?

Yeah, I'm still here every day.

[yellowduck2]

i noticed that when you plot with multiple gpu, you are still limited to the cpu, because both gpu aren't plotting at their best

if i plot with only one card, they plot at 100%

is this normal(i don't want to repeat this because of corrupted plots)? i didn't check the device number for the second card, i just tried some number until i got it

i'm on 750ti btw

yes.

I can run max 3 GPU without much reduction in speed. After 3 will reduce other GPU speed by quite a bit. U can run 2 - 3 GPU.

that's a problem if someone want to plot with, let's say two 970 or 980

It should be fine i think. I suspect it could be because of CPU % allocation in widows. Each GPU will take about 40%. But running 2 is definitely faster than running 1 although 1st GPU might have slight reduce speed but overall speed is almost double

[Irontiga]

Is the dev still active here?

Yeah, I'm still here every day.

So what are the new api calls?

[Amph]

i noticed that when you plot with multiple gpu, you are still limited to the cpu, because both gpu aren't plotting at their best

if i plot with only one card, they plot at 100%

is this normal(i don't want to repeat this because of corrupted plots)? i didn't check the device number for the second card, i just tried some number until i got it

i'm on 750ti btw

yes.

I can run max 3 GPU without much reduction in speed. After 3 will reduce other GPU speed by quite a bit. U can run 2 - 3 GPU.

that's a problem if someone want to plot with, let's say two 970 or 980

It should be fine i think. I suspect it could be because of CPU % allocation in widows. Each GPU will take about 40%. But running 2 is definitely faster than running 1 although 1st GPU might have slight reduce speed but overall speed is almost double

not in my case apaprently, with one i was doing 7k, now only 8k with two 750ti, but i'm optimize stagger as well, could be this?

[fanepatent]

VPS Giveaway!!
10$ credit given to people signing up with my ref link at DigitalOcean
If interested PM me

[Chode]

@Irontiga - You can add the bittrex link in the exchanges section ( https://bittrex.com/Market/Index?MarketName=BTC-BURST ) and koko2530's pool address - http://cryptomining.farm/

Also the new version of dcct's miner is not just for uray's pool anymore (you can read the announcement here - https://bitcointalk.org/index.php?topic=731923.msg8879760#msg8879760 ) - at least in theory it should work with the dev's pool as well, altough for some reason the pool doesn't count the shares submitted from it.

[maxpayne1256]

How much nonces/min do you get? Have you already tried the new c++ windows plotter?

[fanepatent]

How much nonces/min do you get? Have you already tried the new c++ windows plotter?

8200 for me using the new plotter. Or 10000 using the /async option.
On i7 4770k at 4 Gh using 7 cores only

[Irontiga]

@Irontiga - You can add the bittrex link in the exchanges section ( https://bittrex.com/Market/Index?MarketName=BTC-BURST ) and koko2530's pool address - http://cryptomining.farm/

Ok, done, anything else?

[Chode]

@Irontiga - You can add the bittrex link in the exchanges section ( https://bittrex.com/Market/Index?MarketName=BTC-BURST ) and koko2530's pool address - http://cryptomining.farm/

Ok, done, anything else?

I've edited my post before your reply, so check it again

[Irontiga]

@Irontiga - You can add the bittrex link in the exchanges section ( https://bittrex.com/Market/Index?MarketName=BTC-BURST ) and koko2530's pool address - http://cryptomining.farm/

Ok, done, anything else?

I've edited my post before your reply, so check it again

Ok, links to the announcement now

[Chode]

You've left a ( after dcct's R2 miner and in the tools section it also says Dcct miner for Uray's pool.
Also bit . ly is showing some warnings that may scare the users...

//EDIT:
There's also some duplicate content... for example you have 2 links for dcct's tools and 2 links for Janror's plotter

[Irontiga]

You've left a ( after dcct's R2 miner and in the tools section it also says Dcct miner for Uray's pool.
Also bit . ly is showing some warnings that may scare the users...

//EDIT:
There's also some duplicate content... for example you have 2 links for dcct's tools and 2 links for Janror's plotter

What was that link?

[harihebat]

hi burstcoin,

do you change your targetdeadline to 125000?........ nice

[Bitventurer]

Let's discuss PROMOTION http://burstforum.com/index.php?threads/burst-promotion-how-where-when-discuss.118/#post-908

[Chode]

You've left a ( after dcct's R2 miner and in the tools section it also says Dcct miner for Uray's pool.
Also bit . ly is showing some warnings that may scare the users...

//EDIT:
There's also some duplicate content... for example you have 2 links for dcct's tools and 2 links for Janror's plotter

What was that link?

Every bit . ly link I clicked on the site is showing me a warning

[Irontiga]

You've left a ( after dcct's R2 miner and in the tools section it also says Dcct miner for Uray's pool.
Also bit . ly is showing some warnings that may scare the users...

//EDIT:
There's also some duplicate content... for example you have 2 links for dcct's tools and 2 links for Janror's plotter

What was that link?

Every bit . ly link I clicked on the site is showing me a warning

Hmmm....dunno why, but fixed anyway(i didn't make the bit ly links but I don't know why It'd do that)

[Irontiga]

http://cryptomining.farm/ - no payouts within 24 hours and now is down. Don't trust this shit.

Can anyone confirm?

[alphateam]

Problem on uray V2 again?

[fanepatent]

http://cryptomining.farm/ - no payouts within 24 hours and now is down. Don't trust this shit.

And people don't trust me. An active member in the community...