[ANN][SUPERCOIN] Unique Most Advanced Anonymous Trustless Multisig Technology

[Majormax]

Silly question but how does one re-sync from scratch?? I tried to reinstall wallet to fix my sync, but now it wont connect to any nodes or sync, it just opens instantly with 0.00 coins in it. I have multiple backups of my wallet.dat, but I can't seem to rescan them, wallet just opens normally with no connections.

I tried the -rescan command, but it didn't work?

Cheers

Re-syncing from scratch means delete everything except wallet.dat from supercoin folder from appdata >> start the wallet client >> close the client after some time >> create supercoin.conf on supercoin folder from appdata >> Start the client again & you're done.
Always take a backup of wallet.dat before doing anything.

My wallet stat:

Block chain

Current number of blocks   421745
Estimated total blocks       420685

I had similar. Staking is completely broken in that condition. Seems to have been a problem node ??

I am resynching from scratch, using the current .conf file from the OP.

Yeah but problem might be in a given node.
Actually it was working well until 26th but suddenly occured problem from 27th.So stakes after 27th can't be seen in explorer.

We need dev to confirm good nodes ,then. (and reset .conf info)

[jvdp]

Hello bros,
Well mine is S green staling and everything
I have no problems so far i like it that way

thats great, but there is definitely a problem. My last succesful stake was from 27-8 11:02 CEST. I resynced the wallet (takes long) with the nodes in the OP. Still no luck after that, it is now continuously out of sync. When will the devs help us out here?

[RCan06]

Silly question but how does one re-sync from scratch?? I tried to reinstall wallet to fix my sync, but now it wont connect to any nodes or sync, it just opens instantly with 0.00 coins in it. I have multiple backups of my wallet.dat, but I can't seem to rescan them, wallet just opens normally with no connections.

I tried the -rescan command, but it didn't work?

Cheers

Use the .conf file info from the OP (copy it to a text file named supercoin.conf)

Remove the whole supercoin folder from 'roaming' (best keep a copy)

Resync using a new installation: insert the supercoin.conf to the newly created supercoin folder at the beginning, and it should sync OK.


edit ..Wait for Dev to confirm good nodes.

Silly question but how does one re-sync from scratch?? I tried to reinstall wallet to fix my sync, but now it wont connect to any nodes or sync, it just opens instantly with 0.00 coins in it. I have multiple backups of my wallet.dat, but I can't seem to rescan them, wallet just opens normally with no connections.

I tried the -rescan command, but it didn't work?

Cheers

Re-syncing from scratch means delete everything except wallet.dat from supercoin folder from appdata >> start the wallet client >> close the client after some time >> create supercoin.conf on supercoin folder from appdata >> Start the client again & you're done.
Always take a backup of wallet.dat before doing anything.

Thanks for reply, I have done this and my wallet rebuilt the appdata roaming folder, I then added conf. file and wallet.dat backup but my wallet does not try and sync, it simply opens instantly with "0 active connections to supercoin network", and a balance of 0.00

I'll try again tomorrow morning, its late here and I don't want to be fooling around with this when I'm most prone to make mistakes. I'll hopefully rest assured in the fact that I have multiple wallet.dat backups saved right before I tried to reinstall.

Cheers

[CoinMin3r]

Hello bros,
Well mine is S green staling and everything
I have no problems so far i like it that way

Well have you checked block height in your wallet? & check if it same as from explorer.
BTW my S is also green & staking but block height is not right.

[CoinMin3r]

Thanks for reply, I have done this and my wallet rebuilt the appdata roaming folder, I then added conf. file and wallet.dat backup but my wallet does not try and sync, it simply opens instantly with "0 active connections to supercoin network", and a balance of 0.00

I'll try again tomorrow morning, its late here and I don't want to be fooling around with this when I'm most prone to make mistakes. I'll hopefully rest assured in the fact that I have multiple wallet.dat backups saved right before I tried to reinstall.

Cheers

It will start syncing after sometime.
BTW have you checked your wallet address.Is it same as before?

[supercointeam]

I am not sure what happens but it also happens in my desktop at start up.
I guess you host too many crypto coins on that server. It's maybe relate to operating system performance issue, open page limit or thread limit etc. so it bogged somehow.

Server CPU usage is about 90% idle overall (quad-core) with most of the usage being SuperCoind using 25% of one core, 2 GB of RAM are unused, plenty of bandwidth remaining (only using about 50 kBits/s according to nload).

However debug log lists a lot of getblocks requests and a regular stream of orphans, I suspect at least some of the surrounding nodes are stuck on a fork.

edit: CPU usage back to 100% of one core :/ (no worry, just annoying, I always oversize the wallet servers)

I sent you with PM some alive nodes you can try resync with them.

I have similar problems. My sendings have not arrived, and the last sync I tried was a disaster.

Are the nodes + .conf file in the OP correct , before I resync from scratch ?

if it is not arrived then you can repair it, just run "repairwallet" command in help console.and resync from scratch please

[bennuhana]

Mine is at block 420,924 and staking fine, confirming after 50. But Chainz says block 421,000. It should match exactly right?

[jvdp]

do we need to remove nodes from the config? What do I need to do to fix this? Staking is not working properly anymore, my wallet is all the time out of sync. I already resynced the whole thing (which takes a lot of time). What is wrong here??

[rudarSRB]

do we need to remove nodes from the config? What do I need to do to fix this? Staking is not working properly anymore, my wallet is all the time out of sync. I already resynced the whole thing (which takes a lot of time). What is wrong here??

Please type getinfo into console and post your output here.

[jvdp]

do we need to remove nodes from the config? What do I need to do to fix this? Staking is not working properly anymore, my wallet is all the time out of sync. I already resynced the whole thing (which takes a lot of time). What is wrong here??

Please type getinfo into console and post your output here.

16:26:40

getinfo


16:26:40

{
"version" : "v3.0.0.0 (Trustless with Multisig)",
"protocolversion" : 60013,
"walletversion" : 60000,
"balance" : xxx,
"newmint" : 0.00000000,
"stake" : 10504.80534505,
"blocks" : 421310,
"timeoffset" : 0,
"moneysupply" : 16173590.32785835,
"connections" : 21,
"proxy" : "",
"ip" : "94.xxx. ",
"difficulty" : {
"proof-of-work" : 1577.41145084,
"proof-of-stake" : 0.00024414
},
"testnet" : false,
"keypoololdest" : 1404420008,
"keypoolsize" : 101,
"paytxfee" : 0.00000000,
"mininput" : 0.00000000,
"unlocked_until" : 0,
"errors" : ""
}

[danen]

Definitely some faulty nodes on that list in OP, I am also having troubles syncing.

[supercointeam]

Anyone having an issue? Because i dont see a problem.
Node list in OP updated.

[CoinMin3r]

Anyone having an issue? Because i dont see a problem.
Node list in OP updated.

So have you tried to sync & checked with those new nodes? Will wallet be synced properly & coincide the block height from wallet with explorer if synced from scratch? I want to know coz syncing from scratch takes hell lots of time.

[RCan06]

Anyone having an issue? Because i dont see a problem.
Node list in OP updated.

Hey, I think I am having a different issue now. I'm just trying to get my wallet to re-sync. It just starts like normal, and displays zero connections to supercoin network. I did a fresh install (at least I thought) deleting everything but the wallet.dat(backup) and the config file. But now it just starts instantly with no connections and doesn't try to sync (been on for 50minsutes now and nothing happens).

I ran wallet repair and got:

10:35:18

repairwallet

10:35:18

{
"wallet check passed" : true
}

But, the wallet isn't resyncing or displaying my balance. It says unconfirmed 25 super, which is wayyyy less then what should be my balance.

Should I reinstall from scratch again? I don't know what appears to be blocking the connection, first time experiencing this!

Thanks for reply, I have done this and my wallet rebuilt the appdata roaming folder, I then added conf. file and wallet.dat backup but my wallet does not try and sync, it simply opens instantly with "0 active connections to supercoin network", and a balance of 0.00

I'll try again tomorrow morning, its late here and I don't want to be fooling around with this when I'm most prone to make mistakes. I'll hopefully rest assured in the fact that I have multiple wallet.dat backups saved right before I tried to reinstall.

Cheers

It will start syncing after sometime.
BTW have you checked your wallet address.Is it same as before?

Been an hour and no connection to network :/, but yes my addresses are still the same as my old wallet

Edit:

 wallet                  249ms
Loading addresses...
ERROR: CAddrman::Read() : open failed
Invalid or missing peers.dat; recreating
Loaded 0 addresses from peers.dat  0ms
mapBlockIndex.size() = 1
nBestHeight = 0
setKeyPool.size() = 100
mapWallet.size() = 110
mapAddressBook.size() = 4
Done loading
ERROR: FetchInputs() : 08df4d1c56 mempool Tx prev not found 78bf645760
ERROR: FetchInputs() : 67da468f79 mempool Tx prev not found 2ac7430440
ERROR: FetchInputs() : 4f78fb47ba mempool Tx prev not found 67da468f79
ERROR: FetchInputs() : 67da468f79 mempool Tx prev not found 2ac7430440
ERROR: FetchInputs() : 7827cf02fc mempool Tx prev not found af351091a1
ERROR: FetchInputs() : 7827cf02fc mempool Tx prev not found af351091a1
ERROR: FetchInputs() : 795176d13c mempool Tx prev not found 7827cf02fc
ERROR: FetchInputs() : 7e20771a63 mempool Tx prev not found 21f1a519e3
ERROR: FetchInputs() : a7c0f30976 mempool Tx prev not found 72ea4e1123
ERROR: FetchInputs() : abc53271ac mempool Tx prev not found 6b81dec3f1
ERROR: FetchInputs() : c3eeadf0b8 mempool Tx prev not found 34d1e7ce51
refreshWallet
ipcThread started
ThreadDNSAddressSeed started
Loading addresses from DNS seeds (could take a while)
ThreadIRCSeed exited
ThreadMapPort started
ThreadOpenAddedConnections started
ThreadOpenAddedConnections exited
ThreadMessageHandler started
ThreadOpenConnections started
ThreadAnonymousService started
In ThreadAnonymousService2
ThreadSocketHandler started
ThreadStakeMiner started
Flushed 0 addresses to peers.dat  0ms
0 addresses found from DNS seeds
ThreadDNSAddressSeed exited

--------------
Flushed 0 addresses to peers.dat  150ms
UPnP Port Mapping successful.
Flushed 0 addresses to peers.dat  0ms
Flushed 0 addresses to peers.dat  0ms
UPnP Port Mapping successful.
Flushed 0 addresses to peers.dat  0ms
Flushed 0 addresses to peers.dat  0ms
UPnP Port Mapping successful.
Flushed 0 addresses to peers.dat  0ms
Flushed 0 addresses to peers.dat  4727ms
UPnP Port Mapping successful.
Flush(false)
wallet.dat refcount=0
wallet.dat checkpoint
wallet.dat detach
wallet.dat closed
DBFlush(false) ended   

Maybe can help pinpoint problem? Sorry for taking up the thread with this guys, but it has been almost a day for me since I have seen my coin balance, I have backups but they don't seem to load.

[CryptoBull]

@SuperCointeam
tomorrow at what time are we going to have a conversation bro  ?
Checked my wallet again and its fully working for me

[CoinMin3r]

Been an hour and no connection to network :/, but yes my addresses are still the same as my old wallet

As long as you have your wallet.dat backup, you don't need to worry about your balance.As wallet goes syncing, balance goes increasing too i.e. transaction goes confirming (see transaction tab).Also about no connectivity, I hope you know how to create .conf file correctly.

[amiryaqot]

my wallet is working smoothly without of any issue,
it is syncing and staking

[CryptoBull]

I am waiting for a reply from Drew the dude that wrote article for Super couple of days ago, he will do a review and we will send him super coins to test our revolutionary tech

and i asked him can we use the article he wrote to publish it in other sites

[RCan06]

Ok wow, I think I found the problem, was with my windows firewall blocking the connection for some reson. Temporarily disabled firewall and it is syncing now from the beginning. Never had the problem before, not sure why it was blocked this time.

Anyway, seems like it was on my end, I'll let everyone know if it is successful and if I still sync a few blocks ahead. Used new nodes in OP, and yes @CoinMin3r I know how to create a conf file

[CryptoJohn]

I am waiting for a reply from Drew the dude that wrote article for Super couple of days ago, he will do a review and we will send him super coins to test our revolutionary tech

and i asked him can we use the article he wrote to publish it in other sites

If you are talking about this article http://bitcoinwarrior.net/2014/08/supercoin-announces-wallet-supersend-trustless-capability/ maybe ask that the info is updated and reviewed by the superteam before it's released.
The above article still mentions an upcoming IPO....is there going to be upcoming IPO? Fk, maybe i'm in the dark.
There also needs to be a link to a video showing supersend in action(do we even have this yet? & not the mammoth one)....sheeple like videos