KanoPool since 2014 🐈 - PPLNS and Solo 0.5% fee - Worldwide - 2438 blocks

[imine4coins]

i would like to sell some Bitmain coupons to someone on the pool .. I have Coupon $100 USD x 2 , Coupon $200 x 4, Coupon $220 x 4  . Will use any escrow.

Edit: ONLY reply via PM

I have a bunch of $100 coupons available too.

[perfectplus174]

Okay. Bitmain has added some s9i's in the mix now.
I ordered a 13 th/s model and as you can see once you apply the coupon.....well, it was hard to pass up. The 13.5 model was slightly more, but I don't feel it's a big enough difference.

I have a $400 coupon left over and I don't know that I want to spend BTC on anymore miners and wont' have enough BCH for another purchase.....so, I'm willing to trade this coupon for $100 in BTC.

[shadowelite]

Guys quick question
One of my s9 boards has stopped hashing
Any ideas? Changed psu
Recently changed fan
https://imgur.com/gallery/pFF9s0t
Kernal isnt showing any problems
Need the 4th back up and running
Obv mining on kano.is but posted in a sub category on this website

try to reboot the miner

Done a few times also changed psu as i thought maybe psu was faulty

Re-set to factory settings and if that doesn't fix it, upgrade the firmware.

Yep, try this first. 

updated firmware even tho i had upto day firmware no change
It starts mining at 13.5th but after a few min one of the boards drops
I crossed the ribbons to c if its a faulty board or main board cant think of names atm but had to go work so wont know now tfor 12h
So stuck at mining at 9th for now 😢

[Nick_01]

Guys quick question
One of my s9 boards has stopped hashing
Any ideas? Changed psu
Recently changed fan
https://imgur.com/gallery/pFF9s0t
Kernal isnt showing any problems
Need the 4th back up and running
Obv mining on kano.is but posted in a sub category on this website

try to reboot the miner

Done a few times also changed psu as i thought maybe psu was faulty

Re-set to factory settings and if that doesn't fix it, upgrade the firmware.

what fan do you have that it shows 18,120 revolutions?


Yep, try this first. 

updated firmware even tho i had upto day firmware no change
It starts mining at 13.5th but after a few min one of the boards drops
I crossed the ribbons to c if its a faulty board or main board cant think of names atm but had to go work so wont know now tfor 12h
So stuck at mining at 9th for now 😢

what fan do you have that it shows 18,120 revolutions?

[lok8nusa]

So stuck at mining at 9th for now 😢

Two good things:
1) You're still hashing, and
2) the 5Nd means this won't hurt too badly. if at all. 

When the S7 was down a board, all I could think of, or do, was

Mine on!!!

[rifleman74]

So stuck at mining at 9th for now 😢

Two good things:
1) You're still hashing, and
2) the 5Nd means this won't hurt too badly. if at all. 

When the S7 was down a board, all I could think of, or do, was

Mine on!!!

She's running smooth now though right?

[Vlada69]

bloody hell I am without network whole day. to add to bad news. hopefully will get back tomorrow. at least deposits are coming nicely

[imine4coins]

Guys quick question
One of my s9 boards has stopped hashing
Any ideas? Changed psu
Recently changed fan
https://imgur.com/gallery/pFF9s0t
Kernal isnt showing any problems
Need the 4th back up and running
Obv mining on kano.is but posted in a sub category on this website

try to reboot the miner

Done a few times also changed psu as i thought maybe psu was faulty

Re-set to factory settings and if that doesn't fix it, upgrade the firmware.

Yep, try this first. 

updated firmware even tho i had upto day firmware no change
It starts mining at 13.5th but after a few min one of the boards drops
I crossed the ribbons to c if its a faulty board or main board cant think of names atm but had to go work so wont know now tfor 12h
So stuck at mining at 9th for now 😢

Did you re-set to factory settings first before updating firmware? I have had this issue with 2 miners in the past and have managed to fix it by resetting to factory, letting it run for a couple of hours and then upgrading the firmware. In that order.

[porepete]

Finally the wife appreciated my miners,she is using them to dry the clothes.

[ogombii]

I have 6 $100 bitmain coupons to give away there is a donate button asking for receiver id, I assume its for an email address so pm me if you want one.  one each lads. I'm more of a canaan man, avalons for life!

[shadowelite]

Guys quick question
One of my s9 boards has stopped hashing
Any ideas? Changed psu
Recently changed fan
https://imgur.com/gallery/pFF9s0t
Kernal isnt showing any problems
Need the 4th back up and running
Obv mining on kano.is but posted in a sub category on this website

try to reboot the miner

Done a few times also changed psu as i thought maybe psu was faulty

Re-set to factory settings and if that doesn't fix it, upgrade the firmware.

what fan do you have that it shows 18,120 revolutions?


Yep, try this first. 

updated firmware even tho i had upto day firmware no change
It starts mining at 13.5th but after a few min one of the boards drops
I crossed the ribbons to c if its a faulty board or main board cant think of names atm but had to go work so wont know now tfor 12h
So stuck at mining at 9th for now 😢

what fan do you have that it shows 18,120 revolutions?

Replacement fan off ebay but it goes back down to 6200 i think

[shadowelite]

Guys quick question
One of my s9 boards has stopped hashing
Any ideas? Changed psu
Recently changed fan
https://imgur.com/gallery/pFF9s0t
Kernal isnt showing any problems
Need the 4th back up and running
Obv mining on kano.is but posted in a sub category on this website

try to reboot the miner

Done a few times also changed psu as i thought maybe psu was faulty

Re-set to factory settings and if that doesn't fix it, upgrade the firmware.

Yep, try this first. 

updated firmware even tho i had upto day firmware no change
It starts mining at 13.5th but after a few min one of the boards drops
I crossed the ribbons to c if its a faulty board or main board cant think of names atm but had to go work so wont know now tfor 12h
So stuck at mining at 9th for now 😢

Did you re-set to factory settings first before updating firmware? I have had this issue with 2 miners in the past and have managed to fix it by resetting to factory, letting it run for a couple of hours and then upgrading the firmware. In that order.

no just updated firmware
Cool will try that when i finish work
Reset to factory settings
Gonna let it run for a few hour then update firmware

[NotFuzzyWarm]

Y know, ya'all had best continue this support query in the thread started in the support section https://bitcointalk.org/index.php?topic=3712806.0
I rather expect Kano will be removing these as very OT... That and the fact that being in the support area makes it easier for folks to find info on these HW support issues.

[shadowelite]

Y know, ya'all had best continue this support query in the thread started in the support section https://bitcointalk.org/index.php?topic=3712806.0
I rather expect Kano will be removing these as very OT... That and the fact that being in the support area makes it easier for folks to find info on these HW support issues.

i understand what u saying and yea kano WILL delete my posts i know that but at the end off the day im trying to add 4th back to the pool (i know its not a lot but every th matters)  and people here have given me options and ideas that havent been givien in my other post
So if this works i will update the other post
No real harm actually done  except from waisting kanos time lol

[Shazam!!!]

I'm gonna make a Birthday wish for some BTClocks, with the ice cream cake my lady had made for me!!! I hope 40 candles will suffice!!! Ha!!!

[Ze777]

Shazam,wishing you a VERY HAPPY BTCIRTHDAY !!!    
One 50`th of a Tenesee Jack 18yr down the hatch in your name  

MINE ON!

[stefanh]

I have 6 $100 bitmain coupons to give away there is a donate button asking for receiver id, I assume its for an email address so pm me if you want one.  one each lads. I'm more of a canaan man, avalons for life!

Are there any more coupons left?  I tried to send a PM but you have a setting not accepting PMs from noobs.

[imine4coins]

Mr. Kano do you support ASIC boost?  as far as i have heard, only slushpool and ckpool do.

[kano]

Mr. Kano do you support ASIC boost?  as far as i have heard, only scam pools do.

Nope, mine hasn't shown up yet.
I'll probably add it soon after that happens.

[Nick_01]

Mr. Kano do you support ASIC boost?  as far as i have heard, only scam pools do.

Nope, mine hasn't shown up yet.
I'll probably add it soon after that happens.

Tell me how to use asicboost if Kano will allow on the pool?