myagui
Legendary
Offline
Activity: 1154
Merit: 1001
|
|
October 04, 2015, 04:38:27 PM |
|
@bathrobehero: Have you ever tried undervolting the 970? On my 980's I run with lowered voltage, and that allows me the same (high) clocks with reduced power usage and lower temperatures. My power meter broke, so I haven't measured yet the different efficiency levels, but generally speaking, I think that you'll gain the most by tweaking voltage.
|
|
|
|
bathrobehero
Legendary
Offline
Activity: 2002
Merit: 1051
ICO? Not even once.
|
|
October 04, 2015, 04:59:08 PM |
|
@bathrobehero: Have you ever tried undervolting the 970? On my 980's I run with lowered voltage, and that allows me the same (high) clocks with reduced power usage and lower temperatures. My power meter broke, so I haven't measured yet the different efficiency levels, but generally speaking, I think that you'll gain the most by tweaking voltage.
I haven't as I'm afraid that each card would be wildly different in terms of how much voltage they require not to crash (long term) on stock speeds because they also have somewhat wide ranges of stable overclocks. If anything I was considering a slight increase in voltage for the 970s as in my case going for maximum hashrate regardless of efficiency is more profitable and the cooling on them is also pretty good. But I might play around with lowering it in the future just to see.
|
Not your keys, not your coins!
|
|
|
myagui
Legendary
Offline
Activity: 1154
Merit: 1001
|
|
October 04, 2015, 05:01:31 PM |
|
Cool. Even if you could just run through one card, it would be interesting information to have, adding to your efficiency tables
|
|
|
|
Strannik-74
|
|
October 04, 2015, 05:13:29 PM |
|
GIGABYTE GeForce GTX 970 [GV-N970WF3OC-4GD 1.0] GPU 1264MHz (+150)/ Samsung mem 1753MHz (lock) / VDDC 1.2V (lock) Rig idle 70W -- ccminer-1.5.69-git-spmod -- Lyra2REv2 - 9.5MH/s - 155W (Rig 225W) X11- 8.7MH/s - 175W (Rig 245W) Quark- 18MH/S - 220W (Rig 290W) ----------------------------------------------------------------------------------------------- GIGABYTE GeForce GTX 970 [GV-N970IXOC-4GD] GPU 1264MHz (+179)/ Hynix mem 1753MHz (lock) / VDDC 1.2V (lock) Rig idle 70W -- ccminer-1.5.69-git-spmod -- Lyra2REv2 - 8.7MH/s - 150W (Rig 220W) X11- 7.7MH/s - 160W (Rig 230W) Quark- 15.5MH/S - 180W (Rig 250W)
|
|
|
|
sp_ (OP)
Legendary
Offline
Activity: 2912
Merit: 1087
Team Black developer
|
|
October 04, 2015, 05:38:25 PM |
|
GIGABYTE GeForce GTX 970 [GV-N970WF3OC-4GD 1.0] GPU 1264MHz (+150)/ Samsung mem 1753MHz (lock) / VDDC 1.2V (lock) Rig idle 70W -- ccminer-1.5.69-git-spmod -- Lyra2REv2 - 9.5MH/s - 155W (Rig 225W) X11- 8.7MH/s - 175W (Rig 245W) Quark- 18MH/S - 220W (Rig 290W) ----------------------------------------------------------------------------------------------- GIGABYTE GeForce GTX 970 [GV-N970IXOC-4GD] GPU 1264MHz (+179)/ Hynix mem 1753MHz (lock) / VDDC 1.2V (lock) Rig idle 70W -- ccminer-1.5.69-git-spmod -- Lyra2REv2 - 8.7MH/s - 150W (Rig 220W) X11- 7.7MH/s - 160W (Rig 230W) Quark- 15.5MH/S - 180W (Rig 250W)
Can you try release 70 please. Lyra2v2 should be faster
|
|
|
|
ldp5500
|
|
October 04, 2015, 10:44:51 PM |
|
GIGABYTE GeForce GTX 970 [GV-N970WF3OC-4GD 1.0] GPU 1264MHz (+150)/ mem 1753MHz (lock) / VDDC 1.2V (lock) Rig idle 70W -- ccminer-1.5.69-git-spmod -- Lyra2REv2 - 9.5MH/s - 155W (Rig 225W) X11- 8.7MH/s - 175W (Rig 245W) Quark- 18MH/S - 220W (Rig 290W) 750Ti without power, steel risers burn through 12+ volts You should buy an auxiliary power supply adapter cable
|
|
|
|
scryptr
Legendary
Offline
Activity: 1796
Merit: 1028
|
|
October 05, 2015, 12:27:34 AM |
|
ASROCK H81 PRO MB and DUAL VIDEO--
A number of thread-followers have mentioned that they run rigs on ASROCK H81 PRO motherboards. These boards support Intel CPU-Integrated graphics as well as a wide variety of graphic cards. Is it possible to drive a monitor with integrated Intel video, and mine with nVidia graphics cards (750ti SC)?
I will research the web before booting my new H81 rig, but I'd like to know if it has been done by any one of the readers.
Thank you in advance! --scryptr
|
|
|
|
flipclip
Member
Offline
Activity: 111
Merit: 10
|
|
October 05, 2015, 12:35:59 AM |
|
-Stop mining on disconnect's to save power.(pallas / flipclip)
Just tried this new feature. Works like a charm! Stops using gpu and continues to work after connection is available again )) Will send some beers to pallas / flipclip later )) \ Send my beers to Pallas. The only thing I did was re-merge Pallas' "network_fail_flag" to master. It was taken out originally because Pallas wanted to make sure it wasn't the reason for the solo-mining failure. It wasn't
|
|
|
|
bathrobehero
Legendary
Offline
Activity: 2002
Merit: 1051
ICO? Not even once.
|
|
October 05, 2015, 01:01:30 AM |
|
ASROCK H81 PRO MB and DUAL VIDEO--
A number of thread-followers have mentioned that they run rigs on ASROCK H81 PRO motherboards. These boards support Intel CPU-Integrated graphics as well as a wide variety of graphic cards. Is it possible to drive a monitor with integrated Intel video, and mine with nVidia graphics cards (750ti SC)?
I will research the web before booting my new H81 rig, but I'd like to know if it has been done by any one of the readers.
Thank you in advance! --scryptr
Yes, you can use the processor's onboard graphics card (set in bios to onboard) and you should use it because that means that all of your dedicated cards will have 100% of their memory free which is beneficial in memory hard algos. Otherwise the OS will use a chunk of your primary card's memory.
|
Not your keys, not your coins!
|
|
|
rednoW
Legendary
Offline
Activity: 1510
Merit: 1003
|
|
October 05, 2015, 05:52:46 AM |
|
2 scryptr You definitely should use internal graphics for display when mining on 750. Cause running on max intensities will do lags on Windows interface. AMD cards will not.
|
|
|
|
chrysophylax
Legendary
Offline
Activity: 2842
Merit: 1091
--- ChainWorks Industries ---
|
|
October 05, 2015, 06:32:41 AM |
|
ASROCK H81 PRO MB and DUAL VIDEO--
A number of thread-followers have mentioned that they run rigs on ASROCK H81 PRO motherboards. These boards support Intel CPU-Integrated graphics as well as a wide variety of graphic cards. Is it possible to drive a monitor with integrated Intel video, and mine with nVidia graphics cards (750ti SC)?
I will research the web before booting my new H81 rig, but I'd like to know if it has been done by any one of the readers.
Thank you in advance! --scryptr
i have never done it on mine - but it can be done ... the radeon integrated chipset that is used is a separate gpu altogether if using the nvidia drivers from what ive been told ... otherwise - the selection of the cards through commandline ( as a conditional parameter on ccminer ) would probably be what you would use to activate which cards are mining ... like i said though - i have never done it that way - as i use headless systems anyway ... and im way too busy ( and lazy ) to go into this ... #crysx
|
|
|
|
chrysophylax
Legendary
Offline
Activity: 2842
Merit: 1091
--- ChainWorks Industries ---
|
|
October 05, 2015, 06:37:32 AM |
|
GIGABYTE GeForce GTX 970 [GV-N970WF3OC-4GD 1.0] GPU 1264MHz (+150)/ mem 1753MHz (lock) / VDDC 1.2V (lock) Rig idle 70W -- ccminer-1.5.69-git-spmod -- Lyra2REv2 - 9.5MH/s - 155W (Rig 225W) X11- 8.7MH/s - 175W (Rig 245W) Quark- 18MH/S - 220W (Rig 290W) 750Ti without power, steel risers burn through 12+ volts You should buy an auxiliary power supply adapter cable yup - hence the usb 3.0 powered risers on ALL the farms cards ... i have burnt out so many in this fashion when i was starting in mining - its ridiculous ... none of these ribbon risers are ever used in thefarm now ... none ... apart from that - there is more versatility with the lengths that you get with usb 3.0 risers ... and easier airflow around the usb cables that these ribbon ones ... they act as funneling for the airflow across the machine - where as the round cables that come with the usb 3.0 risers have a very airflow efficient non intrusive round cable ... #crysx
|
|
|
|
qqqq
Legendary
Offline
Activity: 1596
Merit: 1011
|
|
October 05, 2015, 08:00:53 AM |
|
So how do you mine with integrated gpu is on via miners that can't support to choose opencl-platform ?
|
|
|
|
chrysophylax
Legendary
Offline
Activity: 2842
Merit: 1091
--- ChainWorks Industries ---
|
|
October 05, 2015, 08:08:03 AM |
|
So how do you mine with integrated gpu is on via miners that can't support to choose opencl-platform ?
thats the point ... you DONT ... the whole purpose of the previous question was simply to use the integrated video - and have the 750ti cards to do nothing else but mine ... id like to research that also - considering that ALL the rebuilt miners ( when they are finished ) will be these same boards ... #crysx
|
|
|
|
zTheWolfz
|
|
October 05, 2015, 08:42:48 AM Last edit: October 05, 2015, 08:54:43 AM by zTheWolfz |
|
There still may be problems with ccminer and phoenixcoin-qt wallet. I've never seen this many no's before while solo mining it. I used a low -i 10 for this test.
|
|
|
|
theotherme
Member
Offline
Activity: 81
Merit: 10
|
|
October 05, 2015, 09:04:51 AM |
|
There still may be problems with ccminer and phoenixcoin-qt wallet. I've never seen this many no's before while solo mining it. I used a low -i 10 for this test. the min target is probably a bit low compared to the real difficulty
|
|
|
|
zTheWolfz
|
|
October 05, 2015, 09:11:20 AM |
|
There still may be problems with ccminer and phoenixcoin-qt wallet. I've never seen this many no's before while solo mining it. I used a low -i 10 for this test. the min target is probably a bit low compared to the real difficulty So is that something I can fix on my end?
|
|
|
|
sp_ (OP)
Legendary
Offline
Activity: 2912
Merit: 1087
Team Black developer
|
|
October 05, 2015, 10:20:48 AM |
|
try to run with with --diff 2 or --diff 0.5
|
|
|
|
sp_ (OP)
Legendary
Offline
Activity: 2912
Merit: 1087
Team Black developer
|
|
October 05, 2015, 03:53:12 PM |
|
submitted a 50khash increase in the lyra2v2 algo compute 5.2 cards (gtx 970)
|
|
|
|
AliMan
|
|
October 05, 2015, 07:00:45 PM |
|
ASROCK H81 PRO MB and DUAL VIDEO--
A number of thread-followers have mentioned that they run rigs on ASROCK H81 PRO motherboards. These boards support Intel CPU-Integrated graphics as well as a wide variety of graphic cards. Is it possible to drive a monitor with integrated Intel video, and mine with nVidia graphics cards (750ti SC)?
I will research the web before booting my new H81 rig, but I'd like to know if it has been done by any one of the readers.
Thank you in advance! --scryptr
Was running this setup last year, was using the iGPU of the G3220 to display.
|
|
|
|
|