CCminer(SP-MOD) Modded GPU kernels.

[Slava_K]

The gpu clock is at around 1200. Standard clocks. only one thread. -g 1

7MHASH mining quark on the 750ti. Private kernal for now.

ok ... so private kernel ...

wish you would say that in the original post sp ... ...

now we know that - we know that theses figures are merely a comparison of what we 'can' get ... not what is available now with the tools we currently have ...

is the kernel available for sale? ...

#crysx

is the kernel available for sale? ... +1

[Grout]

The gpu clock is at around 1200. Standard clocks. only one thread. -g 1

7MHASH mining quark on the 750ti. Private kernal for now.

ok ... so private kernel ...

wish you would say that in the original post sp ... ...

now we know that - we know that theses figures are merely a comparison of what we 'can' get ... not what is available now with the tools we currently have ...

is the kernel available for sale? ...

#crysx

is the kernel available for sale? ... +1

On a totally unrelated subject, it's been a while since I bought you a beer ;-)
8fed0130a061f01345edfbfbe186ff8a4e86a82800179e329eed732056325593

[hashbrown9000]

@chrysophylax, i am oc'ing all of my 15x 750ti cards under linux (lubuntu kopiemtu USB installation).  I've illustrated how over at litecointalk.org kopiemtu thread

[pokeytex]

Any guide available to compile ccminer in Windows environment?

Sure.
Here:
https://bitcointalk.org/index.php?topic=826901.msg11179460#msg11179460

Ok so I downloaded V.S and Cuda 6.5 - installed and opened the .sln file.  It reads it - I assume I hit build?  Also, how do I make it a ccminer.exe?  Any further guidance is appreciated.

Thanks - pokeytex

[Schleicher]

Any guide available to compile ccminer in Windows environment?

Sure.
Here:
https://bitcointalk.org/index.php?topic=826901.msg11179460#msg11179460

Ok so I downloaded V.S and Cuda 6.5 - installed and opened the .sln file.  It reads it - I assume I hit build?  Also, how do I make it a ccminer.exe?  Any further guidance is appreciated.

Thanks - pokeytex

yes, when the build is finished there's a ccminer.exe in the release folder.

[pokeytex]

Any guide available to compile ccminer in Windows environment?

Sure.
Here:
https://bitcointalk.org/index.php?topic=826901.msg11179460#msg11179460

Ok so I downloaded V.S and Cuda 6.5 - installed and opened the .sln file.  It reads it - I assume I hit build?  Also, how do I make it a ccminer.exe?  Any further guidance is appreciated.

Thanks - pokeytex

yes, when the build is finished there's a ccminer.exe in the release folder.

Where would I find this release folder?

[pokeytex]

Any guide available to compile ccminer in Windows environment?

Sure.
Here:
https://bitcointalk.org/index.php?topic=826901.msg11179460#msg11179460

Ok so I downloaded V.S and Cuda 6.5 - installed and opened the .sln file.  It reads it - I assume I hit build?  Also, how do I make it a ccminer.exe?  Any further guidance is appreciated.

Thanks - pokeytex

yes, when the build is finished there's a ccminer.exe in the release folder.

Eureka! - I found it - I just compiled my first miner!  Oh and it is working! LOL So far.  I don't know if it is possible to screw it up?

[djm34]

Any guide available to compile ccminer in Windows environment?

Sure.
Here:
https://bitcointalk.org/index.php?topic=826901.msg11179460#msg11179460

Ok so I downloaded V.S and Cuda 6.5 - installed and opened the .sln file.  It reads it - I assume I hit build?  Also, how do I make it a ccminer.exe?  Any further guidance is appreciated.

Thanks - pokeytex

yes, when the build is finished there's a ccminer.exe in the release folder.

Eureka! - I found it - I just compiled my first miner!  Oh and it is working! LOL So far.  I don't know if it is possible to screw it up?

everything is possible  

[bensam1231]

So something really interesting, with summer here, my miners aren't operating at full speed anymore because of heat on auto fan setting. So I turned it up... But for some reason some of the cards actually end up at lower clock speeds when you turn up the fans?!?!? I still can't figure this out. I assume it has something to do with drawing too much voltage through the card and it throttles itself, but that seems rather stupid. The fans shouldn't draw that much voltage.

When you set the fans back to auto, it pops up to full clock speed for a bit before the card heats up again. So I have ended up setting it at some sort of in between fan speed.

[hashbrown9000]

@bensam, if you are running stock cards with stock firmware, the newer version miners will bump the card over the power limit. the 750ti cards, at least, will throttle back the clocks as a protection mechanism.  if you flash the power limit to ~65 watts, it won't throttle anymore.

[bensam1231]

@bensam, if you are running stock cards with stock firmware, the newer version miners will bump the card over the power limit. the 750ti cards, at least, will throttle back the clocks as a protection mechanism.  if you flash the power limit to ~65 watts, it won't throttle anymore.

I'm using 970s with the TDP setting maxed. This only started happening when it got really hot recently. I assume it was a temp issue, so I juice up the fan speed and then the card throttles itself even more. It's really weird. It got cooler again today so, set it back to auto, clock speeds go back to normal.

[johnambush]

Hi! I need help about something. I was using miner with one gtx 750 Ti and mined FTC (neoscrypt) on GMC pool. It was all perfect until today. I downloaded last version and now miner can't established connection on GMC pool. Settings are same as on previous version. What confuses me is that now older version can't connect. I tried to mine other neoscrypt coins on other pools but miner can't connect. The worst thing is that X11 works flawless, and lyra2 also. I'm confused. Cant find what is causing this problem. I also tried restarting router, miner, turn of firewall but nothing helped. Any advice what may be the cause?

https://www.dropbox.com/sc/xi45w8tmeyng53p/AABMQ8v0a-SaWv7ljRoeUpRka

[sp_]

perhaps the initial difficulty is wrong.

try the f option

 -f, --diff            Divide difficulty by this factor (std is 1) \n\


f.ex -f 0.01

or -f 100

[johnambush]

perhaps the initial difficulty is wrong.

try the f option

 -f, --diff            Divide difficulty by this factor (std is 1) \n\


f.ex -f 0.01

or -f 100

Didn't help...still can't connect 

[sp_]

If you have flooded the pool with rejected shares the pool might ban your ip adress. Change the ip

[johnambush]

If you have flooded the pool with rejected shares the pool might ban your ip adress. Change the ip

It may be the reason. I forgot about that. I can't do it right now but I will report you if it was or not soon as I check it. Thank you. Two heads are often smarter than one

EDIT: But I also tried to mine on Suprnova (for the first time with neoscrypt) and had same result. I doubt it banned my ip 

[joblo]

If you have flooded the pool with rejected shares the pool might ban your ip adress. Change the ip

It may be the reason. I forgot about that. I can't do it right now but I will report you if it was or not soon as I check it. Thank you. Two heads are often smarter than one

EDIT: But I also tried to mine on Suprnova (for the first time with neoscrypt) and had same result. I doubt it banned my ip 

You haven't mentioned what versions you are using but I suggest you stick with the one that used to
work and troubleshoot from there. Make sure you are in fact using the intended version. If it used to
work but now doesn't the problem is not with the miner. More detail about the failure would also be useful.

I have a Windows machine that I need to reboot once in a while because it fails to connect to westhash
quark (retry loop). That's the only affected pool/algo. After the reboot everything is ok again. Updating
drivers hasn't solved it. There is something peculiar about Nice/Westhash as it always fails to connect
on the first attempt. ffpool doesn't have this problem and neither did yaamp. I'm using 1.5.52.

I need to come up with a new compile strategy because VS Community (the free one, not the trial)
refuses to start after 30 days. Then I can instrument ccminer to focus in on the connection failure.

[sp_]

If you have flooded the pool with rejected shares the pool might ban your ip adress. Change the ip

It may be the reason. I forgot about that. I can't do it right now but I will report you if it was or not soon as I check it. Thank you. Two heads are often smarter than one
EDIT: But I also tried to mine on Suprnova (for the first time with neoscrypt) and had same result. I doubt it banned my ip  

Look's like neoscrypt is broken in release 54.
I suspect there are some errors in the vector implementation done in the lyra2re rewrite since they share some code.

[joblo]

Look's like neoscrypt is broken in release 54.
I suspect there are some errors in the vector implementation done in the lyra2re rewrite since they share some code.

Neoscrypt works well for me in release 54.

[djm34]

If you have flooded the pool with rejected shares the pool might ban your ip adress. Change the ip

It may be the reason. I forgot about that. I can't do it right now but I will report you if it was or not soon as I check it. Thank you. Two heads are often smarter than one
EDIT: But I also tried to mine on Suprnova (for the first time with neoscrypt) and had same result. I doubt it banned my ip  

Look's like neoscrypt is broken in release 54.
I suspect there are some errors in the vector implementation done in the lyra2re rewrite since they share some code.

if there are errors they are not from me...  
(and the current public version of neoscrypt use different verctor types...)