antonio8
Legendary
Offline
Activity: 1386
Merit: 1000
|
|
July 16, 2015, 01:18:06 AM |
|
Yeah - just confirmed on my three rigs I cannot run Whirlpoolx for some reason. It starts to mine - even shows up on Suprnova and then the driver crashes. Each rig - weird. Any help or ideas?
thanks - pokeytex
edit: Am running Windows 8.1 pro on all machines - ? maybe OS limitation?
edit2: Am compiling Trupvot's 1.5.3 version to try it out now.
I have a mixed rig also and on some algos I have to put the same cards on it's own bat. Try running them that way and see what it does. EDIT: This is a another option but PITA. Run one card at a time and see if it crashes. I just went through some bad risers causing crashes. Hrmm that would make sense to me however (2) of the rigs are only 750ti's. Regarding the risers wouldn't the other algos crash if the risers were bad? The miner kept crashing so I put each card on it's own bat and the same card kept crashing. I kept switching cards to make sure the card was good and every card I put on the riser crashed. I had ordered some (even some new ones was bad) but now I have just about everything back to normal. So try and run each card on it's own bat and see if the same one keeps crashing. Easiest way I found was individual bats. Ok will try that now - what os are you/were you running? Windows 7 64bit Also, your PSU is strong enough, correct? EDIT Windows 10 on one.
|
If you are going to leave your BTC on an exchange please send it to this address instead 1GH3ub3UUHbU5qDJW5u3E9jZ96ZEmzaXtG, I will at least use the money better than someone who steals it from the exchange. Thanks
|
|
|
hashbrown9000
|
|
July 16, 2015, 01:37:49 AM |
|
not using a bat, and running straight from the command line, what's the command to enable only a single GPU?
|
Pinkcoin: ETH: VTC: BTC:
|
|
|
pokeytex
Legendary
Offline
Activity: 1504
Merit: 1002
|
|
July 16, 2015, 01:47:06 AM |
|
Yeah - just confirmed on my three rigs I cannot run Whirlpoolx for some reason. It starts to mine - even shows up on Suprnova and then the driver crashes. Each rig - weird. Any help or ideas?
thanks - pokeytex
edit: Am running Windows 8.1 pro on all machines - ? maybe OS limitation?
edit2: Am compiling Trupvot's 1.5.3 version to try it out now.
I have a mixed rig also and on some algos I have to put the same cards on it's own bat. Try running them that way and see what it does. EDIT: This is a another option but PITA. Run one card at a time and see if it crashes. I just went through some bad risers causing crashes. Hrmm that would make sense to me however (2) of the rigs are only 750ti's. Regarding the risers wouldn't the other algos crash if the risers were bad? The miner kept crashing so I put each card on it's own bat and the same card kept crashing. I kept switching cards to make sure the card was good and every card I put on the riser crashed. I had ordered some (even some new ones was bad) but now I have just about everything back to normal. So try and run each card on it's own bat and see if the same one keeps crashing. Easiest way I found was individual bats. Ok will try that now - what os are you/were you running? Windows 7 64bit Also, your PSU is strong enough, correct? EDIT Windows 10 on one. Ok - - Individual bats worked perfect. Whirlpoolx doesn't seem to like grouping GPU's under Windows 8.1 64bit? Individually they all work fine. Lags my machine pretty good. I guess I will stick with Quark for now even though it appears to be dropping off the face of the earth. Any new algo's anyone checking out?
|
|
|
|
antonio8
Legendary
Offline
Activity: 1386
Merit: 1000
|
|
July 16, 2015, 01:50:40 AM |
|
Yeah - just confirmed on my three rigs I cannot run Whirlpoolx for some reason. It starts to mine - even shows up on Suprnova and then the driver crashes. Each rig - weird. Any help or ideas?
thanks - pokeytex
edit: Am running Windows 8.1 pro on all machines - ? maybe OS limitation?
edit2: Am compiling Trupvot's 1.5.3 version to try it out now.
I have a mixed rig also and on some algos I have to put the same cards on it's own bat. Try running them that way and see what it does. EDIT: This is a another option but PITA. Run one card at a time and see if it crashes. I just went through some bad risers causing crashes. Hrmm that would make sense to me however (2) of the rigs are only 750ti's. Regarding the risers wouldn't the other algos crash if the risers were bad? The miner kept crashing so I put each card on it's own bat and the same card kept crashing. I kept switching cards to make sure the card was good and every card I put on the riser crashed. I had ordered some (even some new ones was bad) but now I have just about everything back to normal. So try and run each card on it's own bat and see if the same one keeps crashing. Easiest way I found was individual bats. Ok will try that now - what os are you/were you running? Windows 7 64bit Also, your PSU is strong enough, correct? EDIT Windows 10 on one. Ok - - Individual bats worked perfect. Whirlpoolx doesn't seem to like grouping GPU's under Windows 8.1 64bit? Individually they all work fine. Lags my machine pretty good. I guess I will stick with Quark for now even though it appears to be dropping off the face of the earth. Any new algo's anyone checking out? EDIT: Last tip that might help. If you are not gaming and have on board graphics and using one monitor use the on board. If you surf and do other things then don't mine on gpu 0 until you are done (if multi monitor setup) or mine a less intensive algo while multi tasking on that card.
|
If you are going to leave your BTC on an exchange please send it to this address instead 1GH3ub3UUHbU5qDJW5u3E9jZ96ZEmzaXtG, I will at least use the money better than someone who steals it from the exchange. Thanks
|
|
|
joblo
Legendary
Offline
Activity: 1470
Merit: 1114
|
|
July 16, 2015, 02:13:26 AM |
|
not using a bat, and running straight from the command line, what's the command to enable only a single GPU?
-d 0, it's in the help.
|
|
|
|
lawrencelyl
Member
Offline
Activity: 94
Merit: 10
|
|
July 16, 2015, 03:41:50 AM |
|
not using a bat, and running straight from the command line, what's the command to enable only a single GPU?
-d 0, it's in the help. Also depends on which gpu you're trying to enable. If first gpu then -d 0 If second gpu then -d 1 ..... and so on...
|
|
|
|
bensam1231
Legendary
Offline
Activity: 1750
Merit: 1024
|
|
July 16, 2015, 03:55:02 PM |
|
Anyone know if there is a new miner or private miner out right now? All the algos are taking a crap right now.
Anyone have any idea? All the algos are continuing to take a poop.
|
I buy private Nvidia miners. Send information and/or inquiries to my PM box.
|
|
|
sp_ (OP)
Legendary
Offline
Activity: 2912
Merit: 1087
Team Black developer
|
|
July 16, 2015, 04:22:38 PM Last edit: July 16, 2015, 04:32:48 PM by sp_ |
|
Submitted an optimalization in bmw512. My testrig is up from 44600KHASH to 45000KHASH @quark
A few khash gain in x11 as well.
|
|
|
|
pallas
Legendary
Offline
Activity: 2716
Merit: 1094
Black Belt Developer
|
|
July 16, 2015, 06:37:24 PM |
|
Submitted an optimalization in bmw512. My testrig is up from 44600KHASH to 45000KHASH @quark
A few khash gain in x11 as well.
Thanks, I'm trying it now but it's difficult to measure the hashrate difference because of the fan speed triggered throttling.
|
|
|
|
rednoW
Legendary
Offline
Activity: 1510
Merit: 1003
|
|
July 16, 2015, 08:57:25 PM |
|
Submitted an optimalization in bmw512. My testrig is up from 44600KHASH to 45000KHASH @quark A few khash gain in x11 as well.
nice, new quark milestone for my poor gtx750: 6100khs ))) x11 2970
|
|
|
|
bensam1231
Legendary
Offline
Activity: 1750
Merit: 1024
|
|
July 17, 2015, 06:26:06 AM |
|
Anyone have any idea? All the algos are continuing to take a poop.
Apparently SAK is taking a dump right now and it's effecting all the other algos as people are offloading to them.
|
I buy private Nvidia miners. Send information and/or inquiries to my PM box.
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
July 17, 2015, 10:11:15 AM |
|
Anyone have any idea? All the algos are continuing to take a poop.
Apparently SAK is taking a dump right now and it's effecting all the other algos as people are offloading to them. you make it sounds like if SAK was a important coin...
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
sp_ (OP)
Legendary
Offline
Activity: 2912
Merit: 1087
Team Black developer
|
|
July 17, 2015, 10:22:11 AM |
|
http://coinmarketcap.com/currencies/sharkcoin/volume(24h) $ 659,428 (the chinese seems to love this coin for some reason) volume DOGE (scrypt) (24h) $ 283,581 volume DASH (x11) (24h) $ 84,319
|
|
|
|
sp_ (OP)
Legendary
Offline
Activity: 2912
Merit: 1087
Team Black developer
|
|
July 17, 2015, 10:36:35 AM Last edit: July 17, 2015, 11:07:37 AM by sp_ |
|
Another yaampclone has added sharkcoin: http://ffpool.net/9GHASH hasrate of quark so far. (a payout of 0.4046btc/GHASH the last 24hours) Nicehash/westhash are only paying 0.25BTC/GHASH and the net hashrate is 85GHASH@quark.
|
|
|
|
sp_ (OP)
Legendary
Offline
Activity: 2912
Merit: 1087
Team Black developer
|
|
July 17, 2015, 10:47:15 AM |
|
XMR (monero is actually the #14 largest altcoin on the cryptocoin chart. I think I will add my modded for free to ccminer sp-mod. Please donate some beers, I need some fuel for the weekend While the quark clondike seems to pass, we need some new algos to play with.
|
|
|
|
tbearhere
Legendary
Offline
Activity: 3150
Merit: 1003
|
|
July 17, 2015, 11:29:23 AM |
|
And SAK was the 2nd most traded coin for 4 months beating out LTC and now it's #3.
|
|
|
|
pallas
Legendary
Offline
Activity: 2716
Merit: 1094
Black Belt Developer
|
|
July 17, 2015, 11:29:54 AM |
|
XMR (monero is actually the #14 largest altcoin on the cryptocoin chart. I think I will add my modded for free to ccminer sp-mod. Please donate some beers, I need some fuel for the weekend While the quark clondike seems to pass, we need some new algos to play with. beer sent! :-)
|
|
|
|
tbearhere
Legendary
Offline
Activity: 3150
Merit: 1003
|
|
July 17, 2015, 11:33:17 AM |
|
Another yaampclone has added sharkcoin: http://ffpool.net/9GHASH hasrate of quark so far. (a payout of 0.4046btc/GHASH the last 24hours) Nicehash/westhash are only paying 0.25BTC/GHASH and the net hashrate is 85GHASH@quark. And the trouble is with SAK everyone has to be in one pool to beat out the Chinese pools And 100gig hash net and difficulty at 152,000
|
|
|
|
lawrencelyl
Member
Offline
Activity: 94
Merit: 10
|
|
July 17, 2015, 11:34:41 AM |
|
Another yaampclone has added sharkcoin: http://ffpool.net/9GHASH hasrate of quark so far. (a payout of 0.4046btc/GHASH the last 24hours) Nicehash/westhash are only paying 0.25BTC/GHASH and the net hashrate is 85GHASH@quark. I see that ffpool payout for quark has dropped to 0.2555 ...pretty much inline with nicehash/westhash now.
|
|
|
|
bensam1231
Legendary
Offline
Activity: 1750
Merit: 1024
|
|
July 17, 2015, 02:55:32 PM Last edit: July 17, 2015, 03:13:19 PM by bensam1231 |
|
Anyone have any idea? All the algos are continuing to take a poop.
Apparently SAK is taking a dump right now and it's effecting all the other algos as people are offloading to them. you make it sounds like if SAK was a important coin... Sarcasm? >< Another yaampclone has added sharkcoin: http://ffpool.net/9GHASH hasrate of quark so far. (a payout of 0.4046btc/GHASH the last 24hours) Nicehash/westhash are only paying 0.25BTC/GHASH and the net hashrate is 85GHASH@quark. I see that ffpool payout for quark has dropped to 0.2555 ...pretty much inline with nicehash/westhash now. It seems like west/nice have always really closely mirrored SAK profits to the point where it's not even worth joining a pool to mine it. I'm guessing the pool just having great profits for 24 was just pool luck. Didn't know ffpool existed. Hashpower.co has relatively few people on it. It seems as though the Neoscrypt bot net moved over there though. 2500 CPU miners on neo...
|
I buy private Nvidia miners. Send information and/or inquiries to my PM box.
|
|
|
|