CCminer(SP-MOD) Modded GPU kernels.

[pallas]

Normally the difficulty will drop when the coin is tanking, as people are moving over to other coins.

Yes true. When do I get legendary? How many more posts.   

Legendary:   
Activity: the Legendary membergroup has no universal activity requirement.
You are guaranteed to become Legendary somewhere between 775 and 1030 activity,
but the exact point in this range at which you become Legendary is random per user.

Anytime now 

Thank myagui... looks like you are due too

me even more :-D

[sp_]

Ok I'm confused I have sp5. Now what is the one with the quark increase and the other one...can you put them into one build?

I have 6 private miners for the people who donate (donators will get updates).

1. 0.1BTC: Pentablake +100-120% (3 releases)
2. 0.1BTC: Cryptonight +10% (one release)
3. 0.1BTC: Spreadcoin +10-20% (with full sourcecode / linux compatible) (9 releases)
4. 0.1BTC: All nicehash algos optimized. 0-10% (5 releases)(x11,x13,x15,nist5,quark,lyra2v2,neoscrypt)
5. 0.1BTC: decred +18-25% (7 releases) (Full sourcecode(linux) 0.4BTC)
6. 0.2BTC: Vcash(+13%+decred(+18-25%) (0.1 btc discount for the decred buyers) (4 releases)

Ok I'll get
4. 0.1BTC: All nicehash algos optimized. 0-10% (5 releases)(x11,x13,x15,nist5,quark,lyra2v2,neoscrypt)
Is that  sp5 ?
ps waiting for wallet to sync

Spreadcoin #5
Decred #5
is not the same as  All nicehash algos optimized #5

[tbearhere]

Normally the difficulty will drop when the coin is tanking, as people are moving over to other coins.

Yes true. When do I get legendary? How many more posts.   

Legendary:   
Activity: the Legendary membergroup has no universal activity requirement.
You are guaranteed to become Legendary somewhere between 775 and 1030 activity,
but the exact point in this range at which you become Legendary is random per user.

Anytime now 

Thank myagui... looks like you are due too

me even more :-D

[tbearhere]

Ok I'm confused I have sp5. Now what is the one with the quark increase and the other one...can you put them into one build?

I have 6 private miners for the people who donate (donators will get updates).

1. 0.1BTC: Pentablake +100-120% (3 releases)
2. 0.1BTC: Cryptonight +10% (one release)
3. 0.1BTC: Spreadcoin +10-20% (with full sourcecode / linux compatible) (9 releases)
4. 0.1BTC: All nicehash algos optimized. 0-10% (5 releases)(x11,x13,x15,nist5,quark,lyra2v2,neoscrypt)
5. 0.1BTC: decred +18-25% (7 releases) (Full sourcecode(linux) 0.4BTC)
6. 0.2BTC: Vcash(+13%+decred(+18-25%) (0.1 btc discount for the decred buyers) (4 releases)

Ok I'll get
4. 0.1BTC: All nicehash algos optimized. 0-10% (5 releases)(x11,x13,x15,nist5,quark,lyra2v2,neoscrypt)
Is that  sp5 ?
ps waiting for wallet to sync

Spreadcoin #5
Decred #5
is not the same as  All nicehash algos optimized #5

So I guess I'll call it  sp6  I have sp5 for all algo..doing good.  Look for PM sp.

[pokeytex]

Waiting for pascal:

VCASH sp-mod(0.2BTC):



Decred sp-mod(0.1BTC):

@sp - have you heard about the release of Pascal at all?  is there a promising date?

[sp_]

1. 0.1BTC: Pentablake +100-120% (3 releases)
4. 0.1BTC: All nicehash algos optimized. 0-10% (5 releases)(x11,x13,x15,nist5,quark,lyra2v2,neoscrypt)
5. 0.1BTC: decred +18-25% (7 releases) (Full sourcecode(linux) 0.4BTC)
6. 0.2BTC: Vcash(+13%+decred(+18-25%) (0.1 btc discount for the decred buyers) (4 releases)

I will put these 4 in one build.(1.7.6 refork) the price will be 0.4BTC It includes unpublished decred #8, Vcash #5, Quark #6. Discounts for the donators. So If you already have bought decred and VCASH you only need 0.2BTC more.

[tbearhere]

1. 0.1BTC: Pentablake +100-120% (3 releases)
4. 0.1BTC: All nicehash algos optimized. 0-10% (5 releases)(x11,x13,x15,nist5,quark,lyra2v2,neoscrypt)
5. 0.1BTC: decred +18-25% (7 releases) (Full sourcecode(linux) 0.4BTC)
6. 0.2BTC: Vcash(+13%+decred(+18-25%) (0.1 btc discount for the decred buyers) (4 releases)

I will put these 4 in one build.(1.7.6 refork) the price will be 0.4BTC It includes unpublished decred #8, Vcash #5, Quark #6. Discounts for the donators. So If you already have bought decred and VCASH you only need 0.2BTC more.

I just sent you .1 BTC for
4. 0.1BTC: All nicehash algos optimized. 0-10% (5 releases)(x11,x13,x15,nist5,quark,lyra2v2,neoscrypt)

I can't afford .4 BTC

[sp_]

1. 0.1BTC: Pentablake +100-120% (3 releases)
4. 0.1BTC: All nicehash algos optimized. 0-10% (5 releases)(x11,x13,x15,nist5,quark,lyra2v2,neoscrypt)
5. 0.1BTC: decred +18-25% (7 releases) (Full sourcecode(linux) 0.4BTC)
6. 0.2BTC: Vcash(+13%+decred(+18-25%) (0.1 btc discount for the decred buyers) (4 releases)

I will put these 4 in one build.(1.7.6 refork) the price will be 0.4BTC It includes unpublished decred #8, Vcash #5, Quark #6. Discounts for the donators. So If you already have bought decred and VCASH you only need 0.2BTC more.

I just sent you .1 BTC for
4. 0.1BTC: All nicehash algos optimized. 0-10% (5 releases)(x11,x13,x15,nist5,quark,lyra2v2,neoscrypt)
I can't afford .4 BTC

But you have already donated 0.3 BTC haven't you. (from the beginning of the SP-MOD project) Donators get discounts..

[sp_]

I also have a 3% x11 increase I want to put it the 0.4BTC miner.

[sp_]

@sp - have you heard about the release of Pascal at all?  is there a promising date?

There was some more news yesterday, but no release dates.

http://www.extremetech.com/extreme/226032-nvidias-pascal-gp100-gpu-massive-bandwidth-enormous-double-precision-performance

Tesla GP100 3584 cuda cores. 1328MHZ core clock.

The tesla cards are too expensive for mining. I expect the gp100 to be 25% faster than the 980ti. (based on cuda core count and clockrate.)

The gigabyte G1 980ti is mining decred stable @ 1600MHZ core clock.

[pallas]

if you care for profit and pay for electricity, don't overclock your cards :-)

[sp_]

if you care for profit and pay for electricity, don't overclock your cards :-)

You can clock your memory down to 500Mhz to save power, reduce the TDP to save power. Then the coreclock can go up to 1600 for "free". The decred sp-mod #8 only uses 29 registers, and is overclock friendly.

[pallas]

if you care for profit and pay for electricity, don't overclock your cards :-)

You can clock your memory down to 500Mhz to save power, reduce the TDP to save power. Then the coreclock can go up to 1600 for "free".

of course. it was an easier way to say "run nvidia-smi -pl SOMELOWTDP" ;-)

[Ayers]

i'm having a problem when running more than one gpu, on a old algo like x15, the second gpu do not run at full speed, but it's not throttling, it simply sit there at low core speed, why this?
when i restart the machine for the first few seconds it begin to run at full speed, then the miner close and when i restart it once again it run at slow speed, tried also with the Yimp fork but nothing

[pallas]

i'm having a problem when running more than one gpu, on a old algo like x15, the second gpu do not run at full speed, but it's not throttling, it simply sit there at low core speed, why this?
when i restart the machine for the first few seconds it begin to run at full speed, then the miner close and when i restart it once again it run at slow speed, tried also with the Yimp fork but nothing

how's the cpu load?

[Ayers]

i'm having a problem when running more than one gpu, on a old algo like x15, the second gpu do not run at full speed, but it's not throttling, it simply sit there at low core speed, why this?
when i restart the machine for the first few seconds it begin to run at full speed, then the miner close and when i restart it once again it run at slow speed, tried also with the Yimp fork but nothing

how's the cpu load?

it's ok around 20-30%, it only happen when i run the x15, and maybe other xX algo, after i run one of those algo, the first gpu stop working at full speed for all the other algo

[crysx]

1. 0.1BTC: Pentablake +100-120% (3 releases)
4. 0.1BTC: All nicehash algos optimized. 0-10% (5 releases)(x11,x13,x15,nist5,quark,lyra2v2,neoscrypt)
5. 0.1BTC: decred +18-25% (7 releases) (Full sourcecode(linux) 0.4BTC)
6. 0.2BTC: Vcash(+13%+decred(+18-25%) (0.1 btc discount for the decred buyers) (4 releases)

I will put these 4 in one build.(1.7.6 refork) the price will be 0.4BTC It includes unpublished decred #8, Vcash #5, Quark #6. Discounts for the donators. So If you already have bought decred and VCASH you only need 0.2BTC more.

please let me know what this will cost me sp - as im restarting the build of the systems next week ... and will be selling off ALL the gigabyte 750ti oc lp cards i have ...

i just havent found a place for thefarm yet ...

you have a record of what i have donated - so could you mail me an idea of what the residual cost will be for me please? ...

tanx ...

#crysx

[tbearhere]

1. 0.1BTC: Pentablake +100-120% (3 releases)
4. 0.1BTC: All nicehash algos optimized. 0-10% (5 releases)(x11,x13,x15,nist5,quark,lyra2v2,neoscrypt)
5. 0.1BTC: decred +18-25% (7 releases) (Full sourcecode(linux) 0.4BTC)
6. 0.2BTC: Vcash(+13%+decred(+18-25%) (0.1 btc discount for the decred buyers) (4 releases)

I will put these 4 in one build.(1.7.6 refork) the price will be 0.4BTC It includes unpublished decred #8, Vcash #5, Quark #6. Discounts for the donators. So If you already have bought decred and VCASH you only need 0.2BTC more.

I just sent you .1 BTC for
4. 0.1BTC: All nicehash algos optimized. 0-10% (5 releases)(x11,x13,x15,nist5,quark,lyra2v2,neoscrypt)
I can't afford .4 BTC

But you have already donated 0.3 BTC haven't you. (from the beginning of the SP-MOD project) Donators get discounts..

Yes I did and I sent you another .1 BTC  
Net amount: -0.10010213 BTC
Transaction ID: ce6839a959c74297112b0c24b34859223cfffeffd4016ea4c72c42bf3dac887a-000
Thank you
Set you a pm.

[joblo]

i'm having a problem when running more than one gpu, on a old algo like x15, the second gpu do not run at full speed, but it's not throttling, it simply sit there at low core speed, why this?
when i restart the machine for the first few seconds it begin to run at full speed, then the miner close and when i restart it once again it run at slow speed, tried also with the Yimp fork but nothing

Oh dear, I've seen this too much. Here is what I know.

Sometimes when a miner stops and restarts, usually to switch algos, it will exhibit any of the following symptoms:
    - it will fail to start with the same parameters
    - it will start with reduced intensity (-i)
    - it will start in a degraded state, low clock

A reboot will correct the problem.
The occurrance appears to be random. Sometimes a card will get hit multiple times per day, sometimes not for several days
Only some cards are affected, some never exhibit the problem.
There is no pattern to the affected cards, Maxwell and Kepler have both been affected.
It occurs on Windows and linux.
It does not appear to be driver related.
It appears to affect only specific individual cards.

There was discussion about this several months ago. A search on "degraded" might find something.
The bottom line is it was never solved. It's possibly a HW issue.

I do have some new information, It may be heat related, possibly heat stressing a marginal component.
I recently moved an affected card to the basement where it's cooler. It had been crashing often when
profit switching. Since the move it has been more stable but I have not been profit switching with it. I only
switch manually every few days. I may setup profit switching on this PC to try to recreate the problem.

Well there ya go. It's one of those things that has been nagging me for a while. I feel better now.
You could try swapping the cards to see if the problem moves.

[tbearhere]

if you care for profit and pay for electricity, don't overclock your cards :-)

You can clock your memory down to 500Mhz to save power, reduce the TDP to save power. Then the coreclock can go up to 1600 for "free". The decred sp-mod #8 only uses 29 registers, and is overclock friendly.

I didn't know that would work .. got to try it.