bigradeon
Member
Offline
Activity: 98
Merit: 10
|
|
December 16, 2014, 08:35:52 PM |
|
My Lyra hash rate is 7900kH/s with 950W power consumption, or 8.3kH/J. My Neoscrypt hash rate is 2000kH/s with 870W power or 2.3 kH/J. Is your efficiency better than that?
1- 318kh/s Neoscrypt at minimum 1080 vcore, some time must also increase slightly to 1100 vocre ( depend on mem clock, vga asic, vendor ram, etc 2- lyra 1m/s at 1000 vcoreYes - in my case lyra cooler and more Energy efficiency
|
|
|
|
q327K091
Legendary
Offline
Activity: 1792
Merit: 1010
|
|
December 16, 2014, 08:43:17 PM |
|
move to lyra2 was absolutely great as amp required to drive scrypt-N was almost illegal congrats to Vert team, although wish they would have acted sooner.. in general it would benefit community to study lyra2 with an understanding if an fpga/asic can be built to attack it... no large community ever would mine scrypt-N on a massive scale (hence no wonder price have plummeted), lyra2 has a chance, amp reduction is significant btw, large scale DDOS attacks are in progress right now across pools and exchanges, idea there is always to depress MH/s (from the network) to gain an advantage
|
|
|
|
jk_14
Legendary
Offline
Activity: 1292
Merit: 1000
|
|
December 16, 2014, 08:49:44 PM |
|
What is the power consumption of 280x (or 7970) with Lyra2RE? (w/ overclocked and w/o)
It is higher than X11, Neoscrypt, but less than scrypt. That would be really strange : http://youtu.be/uCB3dBnHlVU
|
|
|
|
OverHash
Newbie
Offline
Activity: 42
Merit: 0
|
|
December 16, 2014, 08:50:00 PM |
|
Vertcoin is now trading live at OverHash.
|
|
|
|
q327K091
Legendary
Offline
Activity: 1792
Merit: 1010
|
|
December 16, 2014, 08:52:58 PM |
|
move to lyra2 was absolutely great as amp required to drive scrypt-N was almost illegal congrats to Vert team, although wish they would have acted sooner.. in general it would benefit community to study lyra2 with an understanding if an fpga/asic can be built to attack it... no large community ever would mine scrypt-N on a massive scale (hence no wonder price have plummeted), lyra2 has a chance, amp reduction is significant I think Lyra2RE can be done on FPGA - just depends how much you want to spend. From my understanding, FPGAs are EXCELLENT at logical operations, but fast memory for them gets expensive quickly. 6KiB is not a lot of memory; I think it would be cheap - but that assumes you only want to run one thread at a time. I think, for best performance, you'd want to run dozens, or maybe even hundreds of threads - then you'd start getting bit by the cost, I think. Anyone with actual experience doing FPGA work, feel free to correct me/chime in. theoretically always, but one need an expert , there could be tremendous memory requirement and fpga cost would be prohibitive although a singular manufacturer could create advantage for self Believe above statement is behind weakening of crypto in general as difficulty level is just not there (unlike bitcoin) to have worry less It is a tough problem also explains ripple and nxt rise as asset management tools and rise of POS this year.. over POW.. as far as alt coins are concerned I also second "Anyone with actual experience doing FPGA work, feel free to correct me/chime in." statement insofar as what and how long and possibly how much would it cost to build fpga for lyra2 any software/hardware prohibitive roadblocks would yield advantage (positively speaking) to an investor(s) I am serious investors are much more sophisticated than one imagines ---
|
|
|
|
ocminer
Legendary
Offline
Activity: 2688
Merit: 1240
|
|
December 16, 2014, 08:54:31 PM |
|
move to lyra2 was absolutely great as amp required to drive scrypt-N was almost illegal congrats to Vert team, although wish they would have acted sooner.. in general it would benefit community to study lyra2 with an understanding if an fpga/asic can be built to attack it... no large community ever would mine scrypt-N on a massive scale (hence no wonder price have plummeted), lyra2 has a chance, amp reduction is significant btw, large scale DDOS attacks are in progress right now across pools and exchanges, idea there is always to depress MH/s (from the network) to gain an advantage Nope... Not here...
|
suprnova pools - reliable mining pools - #suprnova on freenet https://www.suprnova.cc - FOLLOW us @ Twitter ! twitter.com/SuprnovaPools
|
|
|
paulo_thork
Newbie
Offline
Activity: 20
Merit: 0
|
|
December 16, 2014, 09:00:09 PM |
|
I have a problem I can not start the sgminer in my 280xwhen I clickhttp://i.gyazo.com/ab3f5e2c3e933fb8570fedd2c62d08b6.pngafter 1 minute is so!http://i.gyazo.com/b822d46a1567add135058a0366d7acb9.pngMY CONF... { "pools" : [ { "url" : "stratum+tcp://pool.verters.com:4444", "user" : "VhbsVm1? ???CuoqofZbp23qr", "pass" : "xxx" } ] , "intensity" : "18", "worksize" : "256", "kernel" : "Lyra2RE", "algorithm" : "Lyra2RE", "lookup-gap" : "2", "thread-concurrency" : "8193", "shaders" : "2048", "gpu-threads" : "2", "gpu-memdiff" : "0", "gpu-powertune" : "20", "gpu-vddc" : "0.000", "api-mcast-port" : "4028", "api-port" : "4028", "expiry" : "28", "failover-switch-delay" : "60", "gpu-dyninterval" : "7", "gpu-platform" : "1", "log" : "20", "no-pool-disable" : true, "queue" : "1", "scan-time" : "7", "tcp-keepalive" : "30", "temp-hysteresis" : "3", "shares" : "0", "kernel-path" : "/usr/local/bin", "verbose" : "true" } try: --no-extranonce still not working!
|
|
|
|
ocminer
Legendary
Offline
Activity: 2688
Merit: 1240
|
|
December 16, 2014, 09:01:05 PM |
|
I have a problem I can not start the sgminer in my 280xwhen I clickafter 1 minute is so!MY CONF... { "pools" : [ { "url" : "stratum+tcp://pool.verters.com:4444", "user" : "VhbsVm1? ???CuoqofZbp23qr", "pass" : "xxx" } ] , "intensity" : "18", "worksize" : "256", "kernel" : "Lyra2RE", "algorithm" : "Lyra2RE", "lookup-gap" : "2", "thread-concurrency" : "8193", "shaders" : "2048", "gpu-threads" : "2", "gpu-memdiff" : "0", "gpu-powertune" : "20", "gpu-vddc" : "0.000", "api-mcast-port" : "4028", "api-port" : "4028", "expiry" : "28", "failover-switch-delay" : "60", "gpu-dyninterval" : "7", "gpu-platform" : "1", "log" : "20", "no-pool-disable" : true, "queue" : "1", "scan-time" : "7", "tcp-keepalive" : "30", "temp-hysteresis" : "3", "shares" : "0", "kernel-path" : "/usr/local/bin", "verbose" : "true" } try: --no-extranonce still not working! did you try an other pool ?
|
suprnova pools - reliable mining pools - #suprnova on freenet https://www.suprnova.cc - FOLLOW us @ Twitter ! twitter.com/SuprnovaPools
|
|
|
q327K091
Legendary
Offline
Activity: 1792
Merit: 1010
|
|
December 16, 2014, 09:02:04 PM |
|
@ocminer above large scale DDOS attack (potentially using hundreds of zombie computers) as we speak is in progress
since crypto pools and exchanges are unregulated FBI will push priority less and they do, if a blue chip company would be attacked like this problem would be delt with in < 1 hr
|
|
|
|
bigradeon
Member
Offline
Activity: 98
Merit: 10
|
|
December 16, 2014, 09:09:23 PM |
|
Jeeeezus. 7990 should get more than that - my 270X does 270kh/s Neoscrypt. Since 7950 gets around 250kh/s on the stock code (low estimate), I'd expect the 7990 to at least hit 390kh/s - 400kh/s.
i mean 318kh/s per core, approximately 740kh/s/ 7990 in Neo, 2mh/s with lyra
|
|
|
|
bigradeon
Member
Offline
Activity: 98
Merit: 10
|
|
December 16, 2014, 09:31:43 PM |
|
Okay, good. I was a little worried, there. 7990 is pretty nice, even my 290X can only hit 560 so far, so that card still has a leg up on it.
Thanks to your help with mod kernel and incredible wallpapers (you know what i mean ) in feather topic P/S: I immediately donated to you a small amount FTC at this time!
|
|
|
|
paulo_thork
Newbie
Offline
Activity: 20
Merit: 0
|
|
December 16, 2014, 09:41:24 PM |
|
|
|
|
|
bigradeon
Member
Offline
Activity: 98
Merit: 10
|
|
December 16, 2014, 09:53:17 PM |
|
you could experience problems (hw,high RJ rate,...etc) when trying to run 14.9 or 14.12 omega catalyst, sgminer lyra optimized with 14.6
|
|
|
|
Oscilson
|
|
December 16, 2014, 10:01:44 PM |
|
DJM's miner is best with 14.6 or 14.7.
|
|
|
|
triplef
Full Member
Offline
Activity: 338
Merit: 100
https://eloncity.io/
|
|
December 16, 2014, 10:14:50 PM |
|
We are open for business, see signature if you want to send hashes where they count !
|
|
|
|
tankist0
|
|
December 16, 2014, 10:58:47 PM |
|
I was able to achieve 1 mh for R9 280x, using win32 sgminer. Now I'm setting up for native win x64, just for the comparison, but what the heck about: algorithm.obj : error LNK2001: unresolved external symbol "void __cdecl lyra2re_regenhash(struct work *)" (?lyra2re_regenhash@@YAXPEAUwork@@@Z) C:\Users\A\Documents\sgminer-Lyra2RE-master\winbuild\output\x64\Release\sgminer.exe : fatal error LNK1120: 1 unresolved externals ========== Build: 0 succeeded, 1 failed, 1 up-to-date, 0 skipped ==========
Probably reverting my VM snapshot to the "clean state" and repeating all the steps in winbuild.txt ... however, could anyone relieve my pain by providing a link to the compiled and working win x64 miner?
|
|
|
|
etang600
Newbie
Offline
Activity: 27
Merit: 0
|
|
December 17, 2014, 12:42:37 AM |
|
Ditched X11 with my working GPU rig and now have it mining VTC.
I've got a half dozen more 750ti's that have been gathering dust for months... I might rebuild that rig in the coming days, especially if the news is as good as has been reported when I whip out the kill-o-watt meter tomorrow.
Vertcoin always had the best community and ambition. The last few months have been trying, but with the hard fork to Lyra2RE, we can start getting excited again.
I'll post power numbers here tomorrow. AM3+ ASRock boards, Sempron procs, one rig with EVGA cards (running), and another with PNY cards.
The EVGA 750ti's are hashing at 720-725 kh/s each, except one that's stuck at 710-715.
EVGA 750Ti's are factory OC'ed, or more? what clocks? (I have 690kH/s with Palit StormX Dual, "factory OC" only) How are you getting 720-725 kh/s out of your 750tis ? I have 36 evga 750tis (using your kopiemtu) and the most I can get is 625 kh/s out of each card
|
|
|
|
HoY
Newbie
Offline
Activity: 26
Merit: 0
|
|
December 17, 2014, 12:56:57 AM |
|
His miner is probably displaying the wrong numbers, no idea why tho. I'm willing to bet whatever pool he mines on reports closer to 600kh/s per card. With major overoclocking djm said he was able to get 660-670kh/s
|
|
|
|
LTCMAXMYR
|
|
December 17, 2014, 01:08:55 AM |
|
move to lyra2 was absolutely great as amp required to drive scrypt-N was almost illegal congrats to Vert team, although wish they would have acted sooner.. in general it would benefit community to study lyra2 with an understanding if an fpga/asic can be built to attack it... no large community ever would mine scrypt-N on a massive scale (hence no wonder price have plummeted), lyra2 has a chance, amp reduction is significant I think Lyra2RE can be done on FPGA - just depends how much you want to spend. From my understanding, FPGAs are EXCELLENT at logical operations, but fast memory for them gets expensive quickly. 6KiB is not a lot of memory; I think it would be cheap - but that assumes you only want to run one thread at a time. I think, for best performance, you'd want to run dozens, or maybe even hundreds of threads - then you'd start getting bit by the cost, I think. Anyone with actual experience doing FPGA work, feel free to correct me/chime in. i believe all algo can be done on FPGA, it is just about Time and Cost. i have some computer knowledge and programming ability,checked some new POW algo. when X11 is released,i think it is bullshit,i haven't touch any X'series coins,no matter what the are. X11 or even up to X26,all have public FPGA code,it is even easier to build FPGA miner than scrypt. if you check whattomine site,profit already show them FPGAs are running. it is a easy way to check if it is mint by FPGAs or ASICs: the calculated profit. you don't need to find where are the FPGAs or ASICs,just easy calculate. go to http://www.whattomine.com/ and find out 7 day Profitability, if it is less than 400%,the algo is rushed by FPGAs, if it is less than 200%,means the coin is dying ,or the algo is rushed by ASICs, another way,if you have 280x card,calculate the one day profit ,not calculate the electric fee. if it is less than 0.2$,the coin is dying or the algo is fucked by FPGAs or ASICs.
|
Never buy any ICO altcoin. Never buy any ASIC altcoin.
|
|
|
bitspender
|
|
December 17, 2014, 01:58:37 AM |
|
Anyone has a good setting for Sapphire r9 290 ? Can't get past ~515 Kh/s
|
|
|
|
|