[AMBER] X13 POW/POS| 10k AMBER=0,01% SHARES | BUY, HOLD & GET DIVIDENDS in BTC/$

[crackfoo]

Is there a way to get payouts from your pool in Amber?  (Mine Amber directly.)

it get's a bit lost in the first moment but it's actually pointed out on the frontpage (just remembered that the yaamp software used to have this feature):

...
Non-BTC payouts depend on that coin being mined as your BTC balance is traded internally by our system to your currency of choice. If we have not or are not mining that currency your payouts will be delayed until the pool has mined the blocks for you to get paid. If you notice in the pools status that the currency is red, it means there is not sufficient amount of the currency to pay miner(s). It's recommended to use BTC.
Use -p "c=SYMBOL" if zpool does not recognize the currency correctly.
See the "Pool Status" area on the right for PORT numbers. Algorithms without associated coins are disabled.

so, no direct port to mine amber, just x13 (or multi or selected algos)... but payout in amber... I'd susspect this to be even more efficient than mining directly...

Yeah, I saw that, thx.  Thought I'd ask to make sure I wasn't missing a direct port.

I've been using SteakCloud as a multipool for my scrypt miners.  I just mine Amber though my video card when power is cheap for the fun of it.  I enjoy mining even if it's not always profitable, I've learned a lot from it.

That being said, looks like AMBER wallet is in maint on both yobit and bleutrade??

[pokeytex]

No block explorer seems to be good.  I am currently on block 598158 - I hope I am on the right chain?

[verycoinsuchlist]

No block explorer seems to be good.  I am currently on block 598158 - I hope I am on the right chain?

however, the network consistency is still pretty weak but I'd say yes... at least that'd be the one with the larger network hashrate, @ height 598197 currently... a mere 400something Mhs

and I suspect aikapool again lost connection and shuffles away... the blockexperts BE also lags ~3h behind... meh

Did you try this...

Update:

While BlockExplorers are down to make sure that you are on a correct chain do the following:

1. Type "getblockbynumber 594177" command in console (Help->Debug->Console)

2. Find line "proofhash":
{
"proofhash" : "00000000215b5309e034ccf4a4b4091a0d874d52980b5cc867c554f7e7c4e1a9"
}

3. Make sure your hash of block No594177 is the same.

for everyone being here the first time after a while, this might be a first check, but that was yesterdays dish... I strongly fear we already are right in the thick with the next rift ...

@ 598217 (pow) my wallets show:
blockhash 000000006ef4662d6ab530167c863e53a38072de63abd10143b53fe2f520384b (pow=proofhash)

@ 598218 (pos) my wallets show:
blockhash f02d67d629226aebfd411d2d332ca2df48f90afe8f94447b83e33ae162f7f153
proofhash 00007652ebc7fb7573f1087f76d6d89e6d148e3dd50bd882ccc8b765a859ace7

[verycoinsuchlist]

C-Cex is the only one that's working right now.  They were the first to go into maintenance...came up on the wrong fork, went into maintenance again, then finally got everything right around 24 hours ago.

cryptsy went ok like 15h ago, too, however... it might or might not be ok as of now, I made a transaction half an hour ago, but that was within my network with all clients at same height... however I've still some few100 amber lying around on those pools (apart from crptopianz), but no good time to move them away, that might turn out to take a while... I prefer serenity over serendipity atm

[verycoinsuchlist]

...

My wallet has the same, with 35 connections.  Let's just hope that if there are two forks again, this is still the correct one.

...

maaaaan, how did you get like 35 connections  ...I'm sitting here on like 3-5... ok, behind a router AND a bridge... but 35 is a number...

the most hashrate atm indeed comes from zpool, that would add up to the current #rate and the wallet seems to be at around the same height.

but again with your 35 clients, how about you post a copy of your peerlist, cos even if most of em will change or go offline any time soon, this might help getting the network a bit tighter until it eventually stabilizes some time. and I've got a hunch I might not be the only one lacking peers atm

[Slydrule]

There is definitely a bad fork.  I am reloading my wallet DB for the 3rd time in the last 36 hours.  

My wallet is at block 598334 and blockexperts is at 597851

http://amber.explorer.ssdpool.com:9146/ is at 593510

cryptopia is in maintenance.

I have no idea if my wallet is on the right fork or not now.

We need some nodes to connect to that are on the right chain AND WORK.  I have tried ambercoin01.mooo.com multiple times but I get 0 connections.

I have tried
connect=ambercoin01.mooo.com
addnode=[2001:0:5ef5:79fb:6:a75:af78:fd36]
addnode=[2001:0:9d38:6abd:3f:2ca2:93c2:5236]
addnode=[2001:0:9d38:6abd:89e:1ddb:b7d5:9b72]
addnode=[2001:0:9d38:6ab8:3844:32a7:b8c4:9761]
addnode=104.158.205.135
addnode=46.185.22.181

which was suggested by another poster but if I set listen=0 to ensure I only connect to those nodes I get no connections.  If I set listen=1 I can get a couple of connections not on the list above.  Their startingheight matches mine so I assume they are on the same fork as me but we all could be wrong!

What nodes work and are on the right chain?

[AmberCoinDev]

Update:

BlockExplorer seems to be not on a correct chain. Please check yours:

1. Type "getblockbynumber 598473" command in console (Help->Debug->Console)

2. Find line "proofhash":
{
"proofhash" : "000008d1c209665b7427e9f412a3e991b9d97224c228d4afbdbd4ad4d794b1ef","
}

3. Make sure your hash of block No598473 is the same.

[verycoinsuchlist]

phew... geez, close shave, lolz... guess, that's how drawing of the numbers @ the daily sweepstake would feel

[5ick3uffalo]

Update:

BlockExplorer seems to be not on a correct chain. Please check yours:

1. Type "getblockbynumber 598473" command in console (Help->Debug->Console)

2. Find line "proofhash":
{
"proofhash" : "000008d1c209665b7427e9f412a3e991b9d97224c228d4afbdbd4ad4d794b1ef","
}

3. Make sure your hash of block No598473 is the same.

Mine matched:

"proofhash" : "000008d1c209665b7427e9f412a3e991b9d97224c228d4afbdbd4ad4d794b1ef"

Mine was , too but today wallet is stuck again :/

[PowerHemp]

idk why but my wallet stop sync.. i have 16 active connections but finding no new block..  downloaded 592782 from 598726

after 3 min wallet run i found 1 block now i am at 592783..

[twn]

Im on 598776 my wallet working fine since thursday night

[AmberCoinDev]

idk why but my wallet stop sync.. i have 16 active connections but finding no new block..  downloaded 592782 from 598726

after 3 min wallet run i found 1 block now i am at 592783..

Just close wallet. And run again.
This should help.

[PowerHemp]

idk why but my wallet stop sync.. i have 16 active connections but finding no new block..  downloaded 592782 from 598726

after 3 min wallet run i found 1 block now i am at 592783..

Just close wallet. And run again.
This should help.

should but dont do^^ tried it sometimes when i start wallet i have ~15 connections and over the time i lose more and more connections and after some hours i have 0 connections

[krjalone]

Same here wallet stuck.  Restarting several times no help.

[crzybilly]

Same here wallet stuck.  Restarting several times no help.

type getpeerinfo and post it here.

What block are you currently on?

[krjalone]

Same here wallet stuck.  Restarting several times no help.

type getpeerinfo and post it here.

What block are you currently on?

BLOCK 597602


[
{
"addr" : "171.4.85.30:31982",
"services" : "00000001",
"lastsend" : 1448808580,
"lastrecv" : 1448808581,
"conntime" : 1448798052,
"version" : 90001,
"subver" : "/AmberCoin:3.0.0.3/",
"inbound" : false,
"startingheight" : 332551,
"banscore" : 0
}
]

[crzybilly]

BLOCK 597602


[
{
"addr" : "171.4.85.30:31982",
"services" : "00000001",
"lastsend" : 1448808580,
"lastrecv" : 1448808581,
"conntime" : 1448798052,
"version" : 90001,
"subver" : "/AmberCoin:3.0.0.3/",
"inbound" : false,
"startingheight" : 332551,
"banscore" : 0
}
]

   Start your wallets like that (in command line):
      Windows: AmberCoin-Qt.exe -connect=ambercoin01.mooo.com
      Linux:     ./AmberCoind -connect=ambercoin01.mooo.com

[Slydrule]

Update:

BlockExplorer seems to be not on a correct chain. Please check yours:

1. Type "getblockbynumber 598473" command in console (Help->Debug->Console)

2. Find line "proofhash":
{
"proofhash" : "000008d1c209665b7427e9f412a3e991b9d97224c228d4afbdbd4ad4d794b1ef","
}

3. Make sure your hash of block No598473 is the same.

My wallet matches this block but I think I went off the right chain after this block again.  Is there a way to tell if there are ad peer nodes out there and then a way to block then from connecting to a wallet to prevent good wallets from going off to the wrong fork?

[crzybilly]

Update:

BlockExplorer seems to be not on a correct chain. Please check yours:

1. Type "getblockbynumber 598473" command in console (Help->Debug->Console)

2. Find line "proofhash":
{
"proofhash" : "000008d1c209665b7427e9f412a3e991b9d97224c228d4afbdbd4ad4d794b1ef","
}

3. Make sure your hash of block No598473 is the same.

My wallet matches this block but I think I went off the right chain after this block again.  Is there a way to tell if there are ad peer nodes out there and then a way to block then from connecting to a wallet to prevent good wallets from going off to the wrong fork?

"height" : 599214,

"proofhash" : "000049bd307b70bd56ef345e0ec80f2a3774d232a0654e9326b397e4f700f760",

is current

[verycoinsuchlist]

Same here wallet stuck.   Restarting several times no help.

type getpeerinfo and post it here.

What block are you currently on?

I'm on block 599,183 and I have 43 connections.  I'll post my getpeerinfo as a txt file here.  It's very long, so I think this is best.  Just in case others might benefit from a list.

Also, I was wondering if the number of connections may be limited by the version of windows people have.  I'm using Windows 7 PRO.  I believe the Home edition differs by the number of network connections it can make, but I'm not sure if I'm talking apples to oranges?

43_Connections.txt
https://drive.google.com/file/d/0B6RHQyjZIdK5eTZnOXFxZUJJZVk/view?usp=sharing

well, yeah cool! that peerlist helped me to eventually end up with 10 more peers who seem to be on track having the correct height, so I distilled them here:

addnode=95.37.167.221
addnode=93.183.146.130
addnode=85.23.16.252
addnode=46.188.4.74
addnode=144.76.238.2
addnode=71.59.104.158
addnode=71.179.61.204
addnode=85.25.214.214
addnode=77.131.8.180
addnode=95.43.75.144

(just add those lines to your ambercoin.conf and restart your wallet)

I'm checking for changes every now and then as certainly the one or other might change their ip or go offline. I will post an updated peerlist in regular intervals, that might help those with little to no connections to stay on the right chain ^^

btw. my last pow blocks would be
getblockbynumber 599331
# 000000003e6790dd3ae1447480bb2d0cd31ed241e8604cbca46691522534bb18

getblockbynumber 599334
# 00000000b0209919e78fb2e17299ce6ffe799a231f6a12f9eecf5c1f973904ab

but atm, I wouldn't swear on being on the main chain...