Both transactions went to Enigma (XNG coin) wallet please fix it Devs total bad day for me
This is the wallet adress where should my EGC come back ->EWpK3TRzBzvNoEuekcq7gxevWfWU5372e5
Sorry to be the barrier of bad news, but both transactions did go to an EGC wallet. Both addresses you mention are valid EGC addresses and I can see your successful transactions on the block explorer to the mentioned addresses as you can see, EeRx8UjFfPbw8a6wYornzFsYa2Y4k72oEp and EHVZfzHzq3g64wprDFTf1HtmLDycTAqsdYTransactions can not be canceled, reversed, or refunded in any way. Once you send someone EverGreenCoin, any crypto currency for that matter, they are sent and can not be unsent. I have no control over other people's wallets. In the same way I can not take coins out of your wallet, I can not take coins out of the wallet(s) you sent these transactions to. It is not possible to send EGC to another coin's wallet. You can only send EGC to an EGC wallet. Which is what you have done here in both instances. Had the address you tried to send to not been a valid EGC address, the EGC wallet would have prevented you. These two addresses only have the one transaction each. What that says is the addresses have not been in use, up until you sent coins to them. Unfortunately, that lessens the likelihood of being able to determine the owner(s) of these addresses, if the addresses even have an owner. Unless someone comes forward with your mistakenly sent coins, there is really nothing that can be done. This is no fault of mine or EverGreenCoin. This is how crypto currencies work. I am so sorry to say, there is nothing I or anyone else, besides the owner of the addresses, can do to help you recover the coins you mistakenly transferred. |
|
|
|
After all that the SBC I'm interested in trying out with the EGC wallet is the C.H.I.P. this is a $9 board that includes eMMC storage, lipo charger, and wifi and 0.5-1W power draw. The potential issues are only 512MB or ram and single core SOC, this is likely to make compiling the wallet more challenging, and my make running it difficult as well. If it works its literally a case of plug in power and go (everything else you need is included on a $9 board).
A lite version of the daemon could be made for this purpose, removing some of the unnecessary code. PoW mining code for example. I can begin looking into this. My personal vision of the solar miner has always been a daemon, 'command line' as called, with a web interface. Keeping the cost down with no display, which would be almost useless for an outdoor application, and removing the unnecessary overhead of the Qt and supporting environment in my mind makes this an obvious approach. My initial reaction is I like how the Pine64's name fits with EverGreenCoin.  Of course, power consumption is a much greater concern. Making the C.H.I.P. more fitting, plus the lower cost. But, as mentioned, it being able to compile and run the daemon, even a lite version, remains to be seen. Some testing will have to be done. I have asked Gabi to chime in here. Again, thanks for the input everyone. EDIT: Ordered my C.H.I.P. to experiment with. Having a cutdown daemon could be interesting, I've been running the daemon (without QT) on my Pi and that seems to have been working ok (although a bit slow at importing the block chain), htop seems to suggest it's using around 26% of the available 1G of ram so there's some hope it might fit on a smaller device. Compilation we might be able to fix by cross compiling and creating a package, then it's just a case of installing the binaries, the packaging side is something I wanted to look at anyway on the Pi so I can easily install it on another Pi without having to install the whole dev environment. I might see if I can at least get it compiling on my C.H.I.P later today. I am working on EGC lite now. There is actually a lot of functions and even a few header and source files I can trim out completely now with PoW over. I think this will be a good idea regardless of what device is chosen for the solar miner. That said, the planned android wallet and desktop wallets could benefit from this trimming. With that in mind, perhaps it is a new version I am working on, not "EGC lite." I am excited to see how big of an impact on resources this will have. Yes, importing the blockchain is intensive. Snapshotting is much faster. There is a recent snapshot in the OP should anyone need it. (Thanks again CryptoChainer!) Yes, a package is what we will certainly want when we are cranking these out on a production level. If you do find time to test on your CHIP, I would greatly appreciate it. If you do or whenever you can, please share your results. At this time, I personally only have a Pi emulator to experiment with. Many thanks! P.S. Community > Dev |
|
|
|
Reserved Blue tshirt,send to poland?
I do believe so. A community member actually made the campaign, they might know better. But, according to what I find in the teespring EU FAQ, they will ship there regardless of how the campaign was setup. You should have had to pay for international shipping. I have emailed teespring asking for verification. I will post and PM you just as soon as I get a response. Thanks for the order! Wow, they got back to me quick!  Hi Steven,
Thank you for reaching out to Teespring Support!
I am happy to help. Yes, we do ship to Poland. When placing the order, just change the country first and the format will automatically change.
Our international shipping fee is $12.50 USD for the initial item, plus $4 USD for each additional t-shirt. The shirt should arrive within 17-21 days from the end of the campaign.
I hope this helps. Please let me know if there is anything else that I can help you.
Kind regards,
Robert
|
|
|
|
Reserved Blue tshirt,send to poland?
I do believe so. A community member actually made the campaign, they might know better. But, according to what I find in the teespring EU FAQ, they will ship there regardless of how the campaign was setup. You should have had to pay for international shipping. I have emailed teespring asking for verification. I will post and PM you just as soon as I get a response. Thanks for the order! |
|
|
|
EverGreenCoin blockchain has been updated at CryptoChainer.com for instant sync. If you grab this blockchain snapshot, your wallet will be synchronized up to 7/13/16 with no importing blocks. Many thanks, fellow Steve! EDIT: This has been added to the OP. |
|
|
|
Replying to a few posts in one. maybe it was also possible to drive an pine64 with it (the better raspberry with mutch less powerconsumption) it needs only 6Watt max. maybe without doing any else then a commandline wallet and a Webfrontend for it based on Node.js or ngix webserver
EDIT:
Wow new 1.4 Version has a LiPo 3,7 V charging circut included ! so it sounds perfect for it and they reduce the power consumption to 2,5 Watt
If that's based on http://wiki.pine64.org/images/1/1d/Power_Consumption.jpg someone needs to learn maths, 5.1*0.53 is not 2.5, there's also no comment on what the SBC is doing (I'd suspect that's idling). Take a look at Pine64+ there are 3 Versions with 512, 1024 and 2048 MB Ram 15, 19 and 29 USD. They only use 5V 0,51 A tested at Version 1.4 and they have directly a 3.7 V LiPo Loader onboard. At time the most powerfull Single Board Computer with the lowest powerconsumption. Raspberry 12 Watt, BananaPi 7,8 Watt and this little devil 2,5 Watt Both the Pine64 and the Pi3 run the A53 CPU core at the same speed that would mean their performance is likely to be equivalent. The Pine64 may be able to run fully 64 bit, the Pi3 currently cannot but it' not clear if that will make any difference in performance, the reports I've seen so far suggest that 64bit arm linux is still buggy, 64bit will also lead to larger pointers and some variable sizes which will lead to the same code needing more memory. No Raspberry Pi uses 12W, the Pi3 suggests a ~12W PSU however at least half that capacity is to allow for USB peripherals meaning the Pi3 needs around 6W for the SBC. There is even evidence that the Pi3 needs just over 1W at idle and under 4W full load ( http://raspi.tv/2016/how-much-power-does-raspberry-pi3b-use-how-fast-is-it-compared-to-pi2b). Based on my experience I think full load on the Pi3 is a bit higher (nearer 6W) however I've not seen any of the older Pi models need over 5W for full load. i think the pi would have the same problems like your stick... takes 9 Watt permanent peek to 10 Watt at boot time. got all 4 Versions at home + all Bananapi Versions... Pine64+ is now on the way 2 times ...
As above, no it doesnt! Most of the pi models are 5W max, the Pi3 is 6-7W max for the SBC. and as a useful quote from the Pine64 FAQ ( http://www.pine64.com/faq-pine-64#toggle-id-20) The board is powered by +5v microUSB port. Exactly how much power is required, in terms of current. (mA), is depending on what you hook up to the board. An official 2.0A (2000mA) power supply is available at the Pine64 store with ample power to run the board for most applications. So they also suggest a 2A PSU for the board + 2x USB devices, compared to the Pi3's 2.5A PSU for board + 4x USB devices. That would suggest they're power requirement are fairly similar. The one advantage the Pine64 does have over most other boards is the option to have 2GB of ram. After all that the SBC I'm interested in trying out with the EGC wallet is the C.H.I.P. this is a $9 board that includes eMMC storage, lipo charger, and wifi and 0.5-1W power draw. The potential issues are only 512MB or ram and single core SOC, this is likely to make compiling the wallet more challenging, and my make running it difficult as well. If it works its literally a case of plug in power and go (everything else you need is included on a $9 board). Thanks for the input guys! Glad to see you stuck around LeChuck! A lite version of the daemon could be made for this purpose, removing some of the unnecessary code. PoW mining code for example. I can begin looking into this. My personal vision of the solar miner has always been a daemon, 'command line' as called, with a web interface. Keeping the cost down with no display, which would be almost useless for an outdoor application, and removing the unnecessary overhead of the Qt and supporting environment in my mind makes this an obvious approach. My initial reaction is I like how the Pine64's name fits with EverGreenCoin. Of course, power consumption is a much greater concern. Making the C.H.I.P. more fitting, plus the lower cost. But, as mentioned, it being able to compile and run the daemon, even a lite version, remains to be seen. Some testing will have to be done. I have asked Gabi to chime in here. Again, thanks for the input everyone. EDIT: Ordered my C.H.I.P. to experiment with. |
|
|
|
hello.
problem with egc wallet. im on win7. it worked fine 2 months ago. then something went wrong with synchronizing with network. lots of blocks remaining ... only 5 active connections to egc network.
wallet version 1.3.0.0 .
maybe someone can help me with this please.
Allow the wallet to remain open. It will discover more peers and sync. You mention 2 months ago. If you did not have an older and now obsolete version (any version prior to v1.3) running during that 2 months, you will be fine. It only needs to catch up now. Please be patient and it will do so. |
|
|
|
I am experimenting with a solar staking setup for a while now, but I still haven't managed to get it going as it should. I bought a Win 10 tv stick, 2 solar power packs and a y-cable for that purpose, but I discovered that my calculations about the power usage weren't correct. So instead of the Win 10 stick, I attached an old Android tv stick and that did the trick. Unfortunately Evergreen doesn't have a staking Android wallet, so my question is if you're planning to have one in the future. PS: nice buy wall at Bittrex We had talked to an experienced android developer many months ago. We could not afford the price (2 BTC) we were quoted. Which may have been a blessing because I doubt we could have got them to do the many updates we have needed over time. Certainly not in a timely fashion. We do plan on having an android wallet, yes. I have met some new contacts in other projects that might make this goal more easily obtainable for EverGreenCoin. |
|
|
|
Don't forget! Only just over a week remains. |
|
|
|
My EGC wallet suddenly stopped connectin to egc network, what to do?
Leave it open, it should discover peers. EDIT: Don't panic. I will help you and your coins are safe. FYI, this user's wallet issue did resolve on its own. Sometimes just a bit of patience and time is all that is needed. But it is great to see people monitoring their wallet. Of course, I am always eager and happy to help so please never hesitate to contact me if you feel something might not be operating as you expect. |
|
|
|
My EGC wallet suddenly stopped connectin to egc network, what to do?
Leave it open, it should discover peers. EDIT: Don't panic. I will help you and your coins are safe. |
|
|
|
I can confirm my test deposit of 1 EGC I made approximately 8-weeks ago has now appeared on the YoBit Trading Exchange. EGC on https://yobit.net appears to be on the correct blockchain and up-to-date. Great news! Portdavenport I had announced yobit was upgraded and confirmed on the correct blockchain. Good to hear your coins were there, as were mine. Thanks for sharing the info! |
|
|
|
As much as I like the commitment of the main dev and whoever is helping him, but isn't 4 different coins not a bit too much to develop and maintain for one man alone?
I have my concerns about it, but maybe I'm wrong.
I think the same. If your goal that you want to reach is high enought for EGC you don't need so much other Coin Projects. And you will not have the time to work for all Projects if you really want to start and sucess with a big Project like EGC. You are right, my days do entail a great deal of juggling and beyond the 4 mentioned projects. I do have teams and other contributors to help and new teams will be and are forming. I am often times, perhaps all times, the one left willing to face a community when things get tough. Not a position I like to be in or be put in but, abandoning is not in my nature. The good thing to be gained through tough times is you find out who is reliable to form a true team and not just opportunists seeking personal gains. I am actively delegating out more and more tasks to people that have proven they can be trusted to carry them out. Case in point and relevant to the EGC community, I have, as of this morning, contracted with SciFiDomains to develop the new EGC website. A task that has fallen off my plate for far too long. Similar delegating of tasks are taking place on other projects as well. No, I can not do it all. What I can do is form working relationships with the trustworthy and reliable people that can help get it all done and be willing to continue even during less fortunate times. This is what I am doing. This is how it will all get done. This is how our goals will be achieved. EDIT: SciFiDomains is the company that the BCT user portdavenport is associate with. As of now, I can tell you the cost for this was extremely small for all that will be gained. Port negotiated EGC a great discount for this service. Half was paid for by the EGC Foundation and half by me personally. More details will be released soon. I only mentioned it at this time because the mentioned concern is valid and I want you all to know it is being addressed. Hello to the Evergreen Community and Thank You EverGreenCoin Developer and Founder, "Steven" for his kind introduction. As some of you may already know I've been posting here on Bitcointalk EGC forums every so often since March 2016, after I first invested in EGC - a coin that struck me as an interesting cryptographic digital currency combining Hybrid PoW and PoS with fast transaction times and a "Green" energy-efficient focus. During this time, I've commented on Green Project aspects of the coin, and coin performance and market value on the exchanges. I've held EGC during times of difficultly for EGC when the network and wallet needed recompiling and technical maintenance by Steven. And I really think acknowledgement and credit (where it is due) here needs to be paid to Steven for not only persisting to support EGC and release fixes when necessary to keep EGC going, but also for his mature, composed and tireless caring communication to assure and assist the EGC community with any questions or problems members may have experienced during EGC's journey. I can confirm that my business www.scifidomain.com has been engaged by Steven to come in and help to develop the EGC website and assist in the online development of the EverGreenCoin.org Project. The Hallmark of all of the Top Digital Cryptocurrencies is a good idea, strong community and developer support, easy to use wallets and a stable blockchain network that encourages coins to be traded and exchanged. While we've no doubt have our share of growing pains and challenges to establish the EGC network, EGC has survived the first set initial challenges facing many Digital Currencies to make it to have distributing its supply/volume, it has finished proof of work ("PoW") at Mining Pools, it's listed for trading at a number of recognizable exchanges, and the network and wallet versions 1.3.0 using Proof of Stake (PoS) are stable now. While more details of our meetings and EGC development will no doubt be announced by Steven, I will mention that some of the things we have discuss are as follows: 1. Improved website presentation and information about EGC. 2. Increased online promotion through social media. 3. Initiatives to invite more Green Businesses to participate and accept EGC. So that's I hope a not too long introduction from me to the EGC community. My business partner, Andrew and I will check in here from time-to-time for community input, feedback and updates. Once again, a Big Thank you to Steven for his community leadership to support EGC through thick and thin, and we look forward to contributing to this Respectfully, David www.scifidomain.comWeb Developer www.evergreencoin.orga.k.a. Portdavenport PS. Steven, at your convenience, if you could email me your best quality LOGO source/s for EverGreenCoin, we'll put the logo into 3D Max for CGI remastering. Thank you David for the kind words and for taking the time to elaborate on scifidomain's plans for the EGC website for the community. I do, as I am sure many others do, eagerly await the both the direct and indirect results of this. So the community is aware and to maintain my own and the EverGreenCoin Foundation's complete transparency, scifidomains services were secured for this project for only 25k EGC. Half of which was paid for by the foundation and half by me personally. A rate that will certainly pay off in fold once complete. The attraction of green businesses alone has me very excited to think were this will take us. Scifidomains has estimated 3 to 6 weeks for completion and more agreements with scifidomains may be made after that. Thanks again David and scifidomains! P.S. David, I will email you the logo SVG files right now. |
|
|
|
Retweeted, times 3 Thanks to everyone that has taken or will take the time, via social media or support tickets, to convince yobit to upgrade. There really is no excuse for this to be dragging out as long as it has. I hope that the louder we urge them, the more likely they will act. do you need a greek translation sir? pm me if you need me  The Greek EGC ANN has been completed: https://bitcointalk.org/index.php?topic=1542444.msg15507462#msg15507462ευχαριστώ! Added to Indonesian EGC ANN. Welcome Greek Thank you for taking that initiative joinfree! All other ANN translators, please update your translated EGC ANN's languages and verify you have the correct link to EverGreenCoin Wallet Version 1.3. All other links and previously linked wallets would no longer work. Thank you in advance! |
|
|
|
Hi, Just a quick update, wallet is resynced and back on correct blockchain. Thanks dev Steve for world class support as always. Prepare to commence weekend moon party! Always glad to be of assistance! |
|
|
|
This is still very much a work in progress and is not in a usable state yet, but feel free to poke around... If you have any suggestions or comments, please feel free to voice them. They are always welcome and appreciated. Again, it is work in progress and with no ETA yet on completion. |
|
|
|
|
Wow indeed, thanks joinfree! Glad to see it is off to a good start!
The donation from the proceeds will be very helpful and used very wisely by the EverGreenCoin Foundation.
|
|
|
|
Faucet goers, please start using http://faucet.evergreencoin.orgI am planning some changes to the coin-faucet.com domain in the near future. Both websites are presently hooked to the same database so, no, you can't enter both. Thank you kindly! |
|
|
|
|
Show Posts
