Yeah, just point your miner to this archive as it is.
|
|
|
I'm getting 69 and 65 temperature?
Is this okay to long time?
That's how hot my blades are (at least right now). Seems to be OK for several days with 1.3 Th and 0.02% HWE at 400 frequency... You can find in BM1384's datasheet that maximum operation temperature for this chip is 125℃, so 60-70℃ should not be such a problem... Anyway, the lower temperature - the better...
|
|
|
Will forward the message to engineers!!! I sincerely hope future "home miners" from both Bitmain and SPTech will run much quieter.
Please do it. Sure they can find more quiet fans in China. Like this cheap one: Gembird DC120SF-12AS3. See how it works: https://bitcointalk.org/index.php?topic=919018.msg10095261#msg1009526170C at one blade and 66 at another. Ambient temperature is 27.5 C in that room (it's very good for my Gouldian finches). So the blades can be even cooler if ambient temp is lower...
|
|
|
Is there an S6 Coming out or a S5 upgrade like what they did with the S1 ?
The S5 looks like it can take two more hash boards hmmmm, I see something coming.
It's time to make an upgrade kits for AntMiner S2 with these new chips... U3 is useless product IMHO.
|
|
|
Unfortunately no... If I decide to buy a power meter, it will be shipped from Moscow and it takes about 4-7 days!Now I got this marvel of Chinese craftsmanship: I don't know how accurate it is, but all my posts in this review will be updated with it's measurements soon. I have also ordered a little radiators for my next cooling mod. They will arrive in 10 days.
|
|
|
I am running S5 on Chieftec APS-850CB (850 W, 80+ Bronze, two 12V rails, and it has 4 (!) separate PCI-E power cables). 1.3 Th at 400 MHz. So your Corsair will be even better for S5, may be too good. ))
|
|
|
А вот кто какими приборами пользуется для измерения потребляемой своими устройствами мощности?
|
|
|
For the S5 what is the recommended worker difficulty. I have been using 2048. Is that high enough?
1024 should be good enough. 2048 is probably too high. If there are no rejected or/and stale shares, then why not to use 2048?..
|
|
|
Temperatures should not be let to rise above 70C Where did you get this information?? Is it from Avalon chip's datasheet? and you will need a typical computer PSU with 4xPCI-E 6 pin power connector I'm wondering why does they put 8-pin connectors on miner's boards?..
|
|
|
Продам 2 шт. Bitmain AntMiner S3 B6. Приобретён 11.08.2014, один гонится до 500 Gh, второй чуть менее везучий (или мне просто было лень возиться и разбираться) выдаёт 460 Gh. Эксплуатировались на работе в дата-центре с кондиционерами, сфотографировать могу по запросу, если кому надо. Вот некоторый пруф:
Если покупателю нужно, могу сделать wi-fi, соответствующие переходнички в наличии, пока не было повода сделать. Прошивка я уж не помню какая (все детали о майнерах - в ЛС), по осени ещё обновил cgminer и так и оставил - новые прошивки часто у народа приносили проблемы в виде недоступности майнеров, падения хэшрейта, поэтому не стал чинить то, что не поломано. Цена: 210 USD за каждый. Предоплата 100%, в рублях или крипте. Доставка (по крайней мере Деловыми Линиями) за мой счёт. Товар озвучил, цену назвал, за деталями обращайтесь в ЛС.
|
|
|
On this photo you see the stock S5 fan. You can replace my Navipower HDB-1212UA with any 120 mm fan which: 0) has 3 or 4 pin connector and better if it is PWM fan (you should cut one leading plastic sliding rail in case of 3-pin connector); 1) can spin at 2500-2800 rpm (Schytche Ultra Case maybe?); 2) can provide 100-130 CFM airflow (many of forum members are using Delta fans); 3) as quiet as possible amongst meeting the above conditions fans. It was hard to find an airflow value for this fan, but I did it, I found it in some chinese catalogue. It says that this fan gives 105.81 CFM and spins at 2800 rpm, but miner's GUI displays 2400 rpm. PM me if you need help searching such fan(s).
|
|
|
What kind of thermal compound is used during S5 assembling? I have Arctic MX-4 and AlSil-3 and I want to try to replace thermal interface and see what it will lead to...
|
|
|
If you find any combination of things that help with either/both noise and reported temp, please let us know. I've ordered a couple S5 and plan to try S3 fans and homemade covers. My environment gets very warm in summer.
https://bitcointalk.org/index.php?topic=919018.msg10095261#msg10095261Now it's about 10 hours S5 is running with replaced fan, and it's almost silent (especially comparing with stock fan). Temps are 76 and 72 C, but HWE is about 0.0196%.
|
|
|
Can I run these using wifi or does net a direct connection to the router?
You can't.
|
|
|
... I have no a noise meter (and I doubt that I'll measure any new values, they all has been measured before me), but if anyone need, I'll take a noise meter for a while.
The free Android Sound Meter app works pretty good. You wouldn't believe, but my first Android smartphone that I have ordered before New Year holidays hasn't been delivered yet.
|
|
|
|