I want it too! Better ir for free. Please PM me if anyone has it but can't (don't want to) use it.
|
|
|
I want it too. Better for free. Please PM me if anyone has it but can't (don't want to) use it.
|
|
|
this WILL void warranty as per BMT. if possible i would connect all 3 pcie to each hashboard.
Alcheminer-like scrypt miners are equipped with only one PCI-E power connector at each hashing board. The boards run more or less OK with ~300 Wt per board. From this point of view 2 PCI-E connectors for each S7's hashing board should be more than enough. Sure the more connectors are plugged the better S7 will work.
|
|
|
ANTMINER S7 is available at bitmaintech.com with BM1385 chips Is there any changelog for Dec. 11th firmware (in particular for 4.05 Th/s miners (Batch 6))?
|
|
|
S7 Specifications:
1. Hash Rate: 4.73 TH/s ±5%
2. Power Consumption: 1293W + 10% (at the wall, with APW3, 93% efficiency, 25C ambient temp)
Bitmain recommend a 1600 watt PSU. You may use the 1300 watt if you underclock it a bit, but dont expect to go higher than the default frequency.
As you well know, hashing speed and power consumption differs from batch to batch. My batch 6 S7 is 4.05 Th and about 1042 W. Now it is powered from 2 Corsair's PSU (1200 W (2 boards+controller) + 1000 W (1 board)), it runs at freq. 650 giving 4.37 Th. At stock frequency it should run fine with one PSU 1200 W. May be I'll try this later.
|
|
|
Does they still offer their miners?..
|
|
|
Без вас бы я не догадался, ну. )
|
|
|
Please pay attention to Antminer's user manual at Bitmain website.
|
|
|
I'm curious how many people and hash power outside of China mine in Chinese pools. Even more curious as to the reasons why they do this. (If a majority of mining were in Antarctica I would be asking a different question.)
A surprising amount. I've even seen quite a few respected members on bitcointalk say they're mining on f2pool/antpool. Pretty sad when you've got great alternatives like this pool. They just think that they'll be able to get more profit at that pools (especially using PPS reward scheme) than at other pools.
|
|
|
only shipping to USA
It's sad.
|
|
|
have you updated a FPGA firmware by jstefanop? May be your real hashing speed at the pool side is so low because of HW errors and rejected shares?
|
|
|
I have some old hardware lying around. I am considering mining solo for the fun of it. Anyone has luck so far? What coins did you mine? I was mining LTC on MAT Excalibur 5 256 MH/s (actually about 230 MH at that moment in my case) at solo.nicehash. I found one block. Right before block reward halving.
|
|
|
Should monero.win.x64.v0-9-beta be started with old .bat file or is there any new way to start bitmonerod and simplewallet?
|
|
|
I will say, I do expect that everyone on the planet mining would have a backup to some other pool(s) Pools telling you to set all your backups to the same pool really have no idea what the point of having a backup is ... ... ... Of course I'll suggest solo.ckpool.org - but that of course is up to you That's my choice! Nice to hear this suggestion from someone else.
|
|
|
I pointed my S7 from last night ..all seems OK but on DashBoard of Antminer site nothing is there.
Any idea ?
Yep. Go to kano.is.
|
|
|
Use a real pool that doesn't SPV mine empty blocks & provides real support in a timely manner - you'll also be helping the network.
Everyone cares now only about his own profit. "F**k the network, f**k the clean and honest pools. Let the "dirty" pool steals some microcoins, but here and now I'll get maximum profit at this pool comparing to others..." - that's how they are thinking.
|
|
|
Хало!
Куплю Raspberry Pi по сходной цене. Интересует 4-х-ядерная версия (мощща лишней не бывает же, вычислительная-то...). Доставка в Новосибирск.
|
|
|
Судя по регулярно отслеживаемым форумам, в более широких пределах напряжения, выходящих за приведённые мной рамки, чипы просто либо не заведутся, либо... По количеству клемм и диаметру винтов - мне кажется, столько выводов "хватит каждому", учитывая, что можно вешать по 2-3 "хвоста" на каждый. Можно сделать по 6 шт. Винты - надо смотреть какую-то "золотую середину". Я ж не инженер-конструктор.
|
|
|
|