Awesome Miner version 7.8.9 (Development preview of 8.0) Important: Awesome Miner and Remote Agent now requires Microsoft .NET Framework 4.7.2 or later. - This .NET version is already included in Windows 10 since April 2018. Run 'winver' to check the current Windows 10 version. If the version is 1803 or above, all is fine and no action is required. - For Windows 7, Windows 8 and older versions of Windows 10, please download and install: https://dotnet.microsoft.com/download/dotnet-framework/thank-you/net48-web-installer Awesome Miner Antminer firmware - Antminer firmware S17, S17+, T17, T17+ version 2.0.3 released - The rule action to set Firmware mining profile has been improved to allow any mining profile property to be set GPU mining - Display of PCI Bus ID on the GPU tab Features - Use colors to indicate if a miner group (on the group page) has one or more miners not hashing or not running at all - Display of ideal hashrate and number of hashing miners is displayed on the Groups page in the web interface Mining software - Nanominer 1.10.1 - Lolminer 1.07 Corrections - Correction to Reboot button in main toolbar didn't correctly make us of the configured reboot method (web or SSH) - Correction to Mining Pool Hub pool balance
|
|
|
|
Hi Patrrike, please add small extra to GPU tab and display a BUS ID info of connected GPU. If rig on Linux, you cant find this info in AM, That will help for diagnostic. And thanks for rule explanation, will try once more time )))
Regards
I agree that Pci Bus ID should be displayed on the GPU tab. I will add this. |
|
|
|
Thanks for the update and good that you resolved the problem. The link you pasted here (which is the same as in our FAQ) is working fine when I'm clicking on it. May I also ask which Windows version you were running (using 'winver' command) as you didn't have the .NET Framework prerequisite installed already. Thanks! Its Windows Server 2016 (v1607) Thanks. Thanks for letting me know. It's correct that this version of Windows Server doesn't include a recent .NET Framework version, which is why you had to upgrade the .NET Framework version. |
|
|
|
Hi,
I have a primary and secondary site which I can see fine in cloud. Would it be possible to add a feature to give me a combined revenue/profit view in cloud?
Regards
Thanks for the suggestion, it's noted! |
|
|
|
Awesome Miner version 7.8.8 (Development preview of 8.0) Important: Awesome Miner and Remote Agent now requires Microsoft .NET Framework 4.7.2 or later. - This .NET version is already included in Windows 10 since April 2018. Run 'winver' to check the current Windows 10 version. If the version is 1803 or above, all is fine and no action is required. - For Windows 7, Windows 8 and older versions of Windows 10, please download and install: https://dotnet.microsoft.com/download/dotnet-framework/thank-you/net48-web-installer ASIC mining - Antminer S19 improvements, including operations to pause (sleep) and resume mining Security - When a user is assigned access to all miners, all virtual groups will also be included Changes - Adjusted timeout values for ASIC miner web requests Mining software - XmRig 6.3.2 Corrections - Correction to balance summary display on the Dashboard - Correction to display of groups and miners when access by users with limited access permissions
|
|
|
|
Thanks for the update and good that you resolved the problem. The link you pasted here (which is the same as in our FAQ) is working fine when I'm clicking on it. May I also ask which Windows version you were running (using 'winver' command) as you didn't have the .NET Framework prerequisite installed already. Thanks! |
|
|
|
Awesome Miner version 7.8.7 (Development preview of 8.0) Important: Awesome Miner and Remote Agent now requires Microsoft .NET Framework 4.7.2 or later. - This .NET version is already included in Windows 10 since April 2018. Run 'winver' to check the current Windows 10 version. If the version is 1803 or above, all is fine and no action is required. - For Windows 7, Windows 8 and older versions of Windows 10, please download and install: https://dotnet.microsoft.com/download/dotnet-framework/thank-you/net48-web-installer Awesome Miner Antminer firmware - Antminer firmware S17, S17+, T17, T17+ version 2.0.3 supported. The firmware version will soon be made available. ASIC mining - Avalon 10-series ASIC integration improved with: Set network settings - Whatsminer ASIC integration improved with: Change password, Firmware updates, Set network settings Features - Export of all selected miners and their current status to CSV. The feature can be acccessed via the toolbar Tools -> Export -> Export to CSV - The dashboard will display Pool balance, Wallet balance and Exchange balance when the coin is Bitcoin Security - Permissions to access Virtual Groups can be assigned to user groups - Improvements when using multiple user accounts in the Windows application, where it's made possible to sign out and sign in with another account (via the Menu). - Configurable permission: Financial details, to define if revenue, profit, and balance should be displayed - Configurable permission: Manage user groups, to define if groups can be added, modified and removed - Configurable permission: Organize miners, to define if miners can be moved to other groups Integration - Pool balance for F2pool - Zergpool regions configurable Configuration - The Total group in Groups tab can be hidden. Right click on the area of groups to show or hide this group. If hidden, the group will be hidden in the web interface as well. User interface - Improved use of metric units for large hashrate and power usage - External Miner update interval setting moved to the Advanced section of the Properties Mining software - Bminer 16.3 - T-Rex miner 0.16.1
|
|
|
|
Hi Patrike, i cant understand how i can configure new feature of rules "run actions of another rule" Example: i have created "rule1" where i set: Apply profit profile: "power profit profile for miner1" activate: "run action of another rule" and select "rule2" in rule2 i do the same actions but only for miner2 Problem is, that the "rule1" only execute actions of "rule2" for "miner1". Cant understand rule configuration logic. How i can configure rule where i can run rules in a chain, one by one  First rule execute commands for actual miner and then delegate execution to other miner and so on. Regards Hi When you use "run action of another rule", Awesome Miner will only look at the list of actions for rule2. Awesome Miner will not consider the triggers and settings for which miners to consider for rule2. So if rule1 is triggered for miner1, it will also run the actions of rule2. The actions will only run on miner1 as this was the miner that triggered in rule1. Nothing will be performed on "miner2". If you want your rule2 to always run the rules for miner2, even when launched from rule1, you need to configure rule2 with "Override miners to run actions on" and configure it to only run on "miner2". Please also note that it's currently only allowed to have rule1 point to the actions of rule2. Awesome Miner will only follow one of these links at a time to avoid loops. Example: You configure rule1 -> (run actions of) rule2 -> (run actions of) rule3. rule1 is triggered: Actions of rule1 and rule2 will run, but not actions of rule 3 rule2 is triggered: Actions of rule2 and rule3 will run. |
|
|
|
And some more questions  Is it possible to add in the Rules a Trigger like "Detect miners name"? So I could create a rule to detect the "Mining State" and if a specific miner like T-Rex is running and execute some actions because of this. And maybe is it possible to also detect a running task? So i could do a rule to kill it, like killing a task in the Task-Manager. If this is possible, maybe you also can do a taskkill action, so we dont have to do it with the Run Executable action. Thanks and all the best to you! I'm providing a solution for your request about detecting miner name. Please add a C# Script trigger where you paste the following script. Please change "cpuminer-opt" to the software you want to check for. Please enter the name (or part of the name) as displayed on the Summary tab for a selected miner, in the "Miner" section, property name "Mining software". public class TriggerScript : IUserScriptTrigger
{
private ContextProvider Context = ScriptManager.Context;
public List<IMinerBase> Check(List<IMinerBase> minerList)
{
List<IMinerBase> resultList = new List<IMinerBase>();
foreach(MinerBase miner in minerList)
{
if (miner.ValidateStatusUpdate() && miner.StatusUpdate.ConfigStatus.MinerDescription != null && miner.StatusUpdate.ConfigStatus.MinerDescription.Contains("cpuminer-opt"))
resultList.Add(miner);
}
return resultList;
}
} I've noted your request about an action for terminating a process as well. |
|
|
|
Is it me or did the stats go away with the latest update?
IE: Summary tab at the bottom all the way to the right... accepted, shares, best, diff, etc area.
Is it me or did the stats go away with the latest update?
IE: Summary tab at the bottom all the way to the right... accepted, shares, best, diff, etc area.
RELEASE NOTES: User interface - Summary tab for a miner has been reorganized to give a better overview Patrike there is a problem with the new reorganized summary tab on 4:3 screen. It will not show all informations, especially the "mining details" On another screen with 16:9, there is no problem. I agree, I do not run it full screen, but now half the information I am used to seeing, I cannot see. so I have to keep expanding it, then shrinking it back down again.
Thanks for all feedback. I will make some UI adjustments to better fit all the information. You can expect an updated development release within the next 1-2 days. |
|
|
|
Hi Patrik,  in the "Profit Profile Properties" in "Batch Commands" there seems to be a bug. The 1st field "Before starting the mining software" is working with no problems. But the 2nd and 3rd field "Before..." and "After..." isnt working. Everything inside will not be executed, no matter if its a bat.file or just a command with or without "". I have marked the "Administrator privileges", but have not tested without, because I need the admin. In my example above in the picture and to make it work, I have to execute the taskkill-task in the 1st field "Before starting..." in each of the algorithms. Instead of just execute the task in the 2nd/3rd field "Before/After stopping" just in the ETH-miner. Can you please check this? Also I have a question about the fields: Will AM execute each line in the fields separately or just all as one line? Or in other words: Can I put a whole bat.file into the fields and it will work? P.S. Thank you for the last AM update with the action override function. This is so great! Hi Joseph, I'm not able to reproduce the problem. 1) Can you please check your Remote Agent log file and look for "Executing batch commands"? Do you see any error message on the line below? 2) Please verify that you don't have miner-specific overrides for batch commands (Managed Miner Properties, Command line section) 3) Can you also try with something other than your own batch-file. What happens for example if you simply launch "calc.exe" or "notepad.exe" as stop script? What Awesome Miner is doing for these batch commands is to create a bat-file, put your defined content inside the bat-file and finally execute the bat-file. This makes it possible to take the content of a bat-file and paste it in Awesome Miner and it will run as a single bat-file. |
|
|
|
Hi Patrike,
SRBMULTIMINER 0.4.7 work not correct with Awesomeminer. AM write the Pool information in the config file, but if SRBMultiminer start with config file, it ignore every commandline argument. So if i set --disable-gpu in commandline it will not start because no suiteable gpu found or it will mine with all gpu“s. I must set "disable_gpu" : true in the config file on every rig.
Maybe it is better to start SRBMultiminer only with commandline or can you add a tab to configurate the config file like XMRig or Nanominer?
Hi and thanks for the feedback. I will have to look into this as in the past everything couldn't be set via the command line and using a configuration file was the only way for Awesome Miner to get things to work. |
|
|
|
Hi, After upgrading to this Development version, I can no longer define a pool coin on my managed profit miners? It's greyed out. Any suggestions?
Thanks
I will correct this in the next release. The purpose was only to prevent it for some of the predefined pools where the coin shouldn't be changed (as it would only cause problems). As a workaround, it should be possible for you to go to the Options dialog, Pools section, to select the coin for your pool. |
|
|
|
|
Awesome Miner version 7.8.6 (Development preview of 8.0)
ASIC mining
- The operations to set Default Pools, Reboot, Change firmware and set web password have been redesigned to work on multiple kinds of ASIC miners
- NOTE: If using Innosilicon, Avalon 10-series or Whatsminer, please open the Properties of the External Miner and select the correct ASIC hardware type. The miner credentials are also entered for the External Miner (Advanced section) or globally in the Options dialog, Mining Settings section.
- Avalon 10-series ASIC integration improved with: Default Pools, LED on/off, Pause/Resume mining
- Updated Avalon ASIC support for latest firmware versions
- Whatsminer ASIC integration improved with: Reboot, Restart, Default Pools, LED on/off, Pause/Resume mining. Requires August 2020 firmware.
GPU mining
- Detection of nVidia Cuda 10.2 and 11.0 to support selection of mining software with dependencies on recent Cuda versions
Features
- The miners in a miner group can be sorted by IP address
- Miner groups: Display of ideal hashrate. Configurable in the Options dialog, General section
- Miner groups: Display the number of hashing miners (miners with a non-zero hashrate). Configurable in the Options dialog, General section
- Information column: Display ASIC chip temperature
- Information column: Display ASIC firmware version for more ASIC models
- Add miner wizard: Network scan supports IP ranges to be entered like 192.168.0-2.100-199
- Add miner wizard: External Miners can also be added with IP ranges, to add a large number of miners at once
- Filtering of miners to only show miners with zero hashrate
Configuration
- ASIC hardware selection for an External Miner has moved from the Advanced section of the External Miner Properties to the General section, to make it easier to find
- Number of coins to show with exchange rate the status bar can be configured (from 0 - 20). The default is still to show 15 coins. Configurable in the Options dialog, Coins section.
User interface
- Summary tab for a miner has been reorganized to give a better overview
- ASIC tools menu has been reorganized to match the improved support of ASIC miners for several of the operations
- Operations performed via the ASIC tools menu with progress display will now list all miners with their configured ASIC hardware before any operation is performed
- Rule action menu for ASIC related operations has been reorganized in a similar way
Mining software
- CryptoDredge 0.24
- Lolminer 1.05
- Nanominer 1.10.0
- Lolminer 1.06
- Miniz 1.6v5
- PhoenixMiner 5.1c
- Gminer 2.21
Corrections
- Correction to Remote Agent running on Fedora with 7 digit process identifiers
- Correction to reading of nVidia power usage on Linux
- Correction to NbMiner Ethereum mining protocol for 2miners.com
|
|
|
|
Hi Patrike,
Question about GPU OC Group Profiles:
If i save a GPU OC Groupe, it will create a Group for the Rig and sorted the GPU profiles by GPU ID, but i think the better way is to sorted by PCI Bus ID, because if a GPU died, the order will be change.
So better way is to sorted it by PCI BUS, i know i can change it after saving, but i think this not comfortable. Maybe AM can ask us, when i save a GPU OC Group, what we want, sorted by GPU ID or sorted by PCI BUS ID.
Hello. This is a good point. There are a few design changes I need to do to support saving with PCI Bus ID instead, but your request is noted. Once implemented, I think PCI Bus ID should be the new default way of saving these profiles. |
|
|
|
hello
any news about to modify hashrate with current or average hashrate within a rule command or automatically (option) when switching ?
if possible ? :-) thanks in advance
I agree this would me a nice feature. What would make it a bit complicated is if you are running a mix of GPUs. What should be saved to the Profit Profile - the first GPU only (given that the profile represents a single GPU)? And additional feedback on this is of course appreciated as well. Many thanks! |
|
|
|
Thanks!
Also had another request for Cloud UI. It currently shows only top 8 coins and top 8 algorithms on the Dashboard. It would be nice if it showed all or maybe 12-15.
Thanks for the suggestion - it's noted! |
|
|
|
NBMiner on ETH has multiple stratum support. But AM is defaulting to the proxy stratum, can you set AM to not define the statum-proxy:// part of the url and instead use the entire url as defined in the pool config?
What Awesome Miner do today for NbMiner in case of ETH mining is to replace any "stratum" string in the URL with "ethproxy" in the pool url that typically looks like stratum+tcp://poolurl. Can you please give an example of the complete URL you are using? If it doesn't contain the string "stratum" it shouldn't be modified. Actual Pool URL : stratum+tcp://eth.2miners.com:2020 But it be being converted to a ethproxy url which the pool rejects as invalid. NBMiner supports for ETH mining : nicehash+tcp:// ethproxy+tcp:// stratum+tcp:// I think AM should take the URL as is from pool config, so that the user can configure the miner as required instead of locking to ethproxy. Thanks for the input on this. However, if I no longer will adjust "stratum" to "ethproxy" for NbMiner Ethereum, most other pools will fail instead. For most users using pools with stratum+tcp://, and if these are not automatically changed to ethproxy for NbMiner Ethereum, it would fail and not be easy to understand why. If 2miners.com is the exception, I can handle that specific case instead. |
|
|
|
Is this for nVidia? If this is the case, could you please run the following command on Ubuntu and share the output with me: nvidia-smi --query-gpu=name,power.draw --format=csv,noheader,nounits This command should display the reported power usage. cpu3900x@3900x:~$ nvidia-smi --query-gpu=name,power.draw --format=csv,noheader,nounits GeForce RTX 2060 SUPER, 125.33 GeForce RTX 2060 SUPER, 125.06 Thanks, this is good information. I will correct the problem in the next release. |
|
|
|
@patrike
Need an option to "Reboot and show progress (via SSH)", similar to "Reboot and show progress (via web)".
Will be very useful to see if reboot actually succeeded, since sometimes miners don't even respond to ssh.
Thanks!
I'm planning to make a design change to how Default Pools and Reboot works in the next release. I will include "Reboot and show progress" as well based on your feedback. Today there are "via web" and "via SSH" operations. From now on it will only be a single operation. If Web or SSH should be used is instead defined in the Properties of the External Miner, Advanced section. This makes it possible to have a mix of ASIC miners, some that has SSH and others with only Web, and you can perform a single operation on all of them. Depending on how the External Miner is configured, it will use either the Web or SSH method for the specific miner. |
|
|
|
|
Show Posts
