Dave01, scamiam, and other retards/shills...the time is right for some apologies I think. Its plainly obvious that you all sucked the wrong brilliant cock, as it actually belonged to a moron and a now proven scammer. The last shred of hope you guys had was the 'fake' investigation which is now clearly real (as if there was even any doubt). Either come out, admit you're wrong, and try to help prevent fraud like this from occurring in crypto circles from now on, or just put guns in your mouths and pull the trigger. Do everybody a favour.
Those aren't shills, they're sock puppets. You would have to be dumber than a bucket of dirt to still be shilling for garbonzo & co. at this point. |
|
|
|
The reasons for our silence will become clear very soon….. but obviously Mr. Carlos Garza got his legal coaching from “Top Legal LLP”.
WINTER is coming for both Josh and Carlos and six others.
Ladies and gentlemen. There are 7 confirmed wonders in the world. We are about to show you the 8th. Without no doubt, theeeeeeese are the J.B's! Hit it! Yeah bitches! Suck it Josh! |
|
|
|
Antpool is shrinking in last few days. I wonder if next gen miners will be coming online soon.
net hashrate has been steadily increasing, so something new is coming online. Antpool hashrate is back to what it was before, let's see if it continues upwards from here. |
|
|
|
Interesting coin, does the Dev show up any more?
Last post was a couple weeks ago but he has been on the boards as recently as today. |
|
|
|
|
Antpool is shrinking in last few days. I wonder if next gen miners will be coming online soon.
|
|
|
|
|
If it happens again I'll get that stuff. Since I made my post it hasn't failed off of mint.bitminter.com.
|
|
|
|
|
I am also having failovers but only in the last couple hours I think. But they failed to a backup pool, came back, failed again, came back and then failed a third time. I have setup us2.bitminter.com:3333 as the first backup so we'll see if they fail off of mint.bitminter.com:3333 to that. I have a third backup on another pool.
|
|
|
|
Current USD rate is over $288 yet they have their's set at $278
Good catch. I will have to make a point of paying attention to that if I wind up buying anything from them again. |
|
|
|
|
If they really are selling their pool hardware so they can upgrade what is already the largest pool then these things are way over priced. The difficulty is going to go up a lot and these things will see diminished returns quickly. I am interested to know what the specs are on their 4th gen asics if they really exist.
|
|
|
|
|
Did something change with vardiff? My difficulty keeps alternating between 512 and 1024 and my hashrate keeps yo-yoing as a result. I know the hashrate probably shouldn't yo-yo from that but it totally is. It happens on my S4 and it happens on another address where I have 2 S5's.
EDIT: Actually I am assuming (perhaps incorrectly) that the alternating difficulty is causing the yo-yo on the hashrate graph. My S4 is alternating between 1024 and 2048 and has always exhibited more hashrate variation than the two S5's but in the past few days they are both swinging up and back in a rather wider arc than I usually see.
|
|
|
|
Hi. Here a newbie, small miner for hobby. Only three months mining...
I am having problems with vardiff, since aprox. 8 hours ago...
I have 4 Gridseed 5-chips Dualminer, running with CGMINER 3.7.2 and Windows XP. I use Zadig.
Last month they work without problems, at 850 MHz, about 1.4 MH/s and WU of 5 (1.2 each).
I always use vardiff with cgminer. About half an hour from starting, diff goes down to 256 and
everything was allright...
Suddenly, today, mi cgminer was at diff 1204... No accepteds.. No work... Very strange,
no changes by my side. PROBLEMS.
I restart a couple of times my miners. Always the same, diff fixed at 1024. WU 1.1 for 1.4 MH/s
Now they are mining but very slow. My small profits are going down...
¿Is really working clevermining vardiff just now? It seems not for me...
I try about 30 times to use fixed diff, with -p parameter... I think this can fix my problems...
BUT ALSO THIS NOT WORKS FOR ME. MORE PROBLEMS.
With Windows XP I tried...
-p d=256
-p "d=256"
nothing works, it always uses vardiff... But now my miners at 1024 diff do about 1/5 of previous work.
Connected to EU server.
Not sure what todo now...
Regards.
Maybe try the us server? If the vardiff works better it may make up for the lag as a short term fix. It's weird that so many people are having problems with the manual difficulty too unless that is also a problem with the eu server or something. I have bfgminer on three different machines with two different kinds of hardware and I have cgminer on another machine with yet another kind of hardware and all of them are working fine using manual difficulty (at either 512 or 1024). |
|
|
|
I am very attentive to this coin, to see when the price goes up to attract the attention of more users.
Thank you for the information WCIR.
Well, i do not see price going up, i check it every day and i do not see any buys tho, just sells! 0.287BTC buysupport.. No new Investors jumping on this Coin. If you are checking it every day then you have to be happy about what you have seen yesterday and today. |
|
|
|
Homero used to wear chokers like a good little boi who likes his balls cupped before moving onto vests, also penguin bestiality  No wonder Homero the clown sockpuppet accounts hate you. You hit a little too close to home me thinks. |
|
|
|
Hello Everybody,
im new to the mining game. been mining various coins for the past few months then i found this pool and it sounds great but im having trouble starting to mine. Im using ccminer which then told me to "try DJM edition". so i tried that but then i get no errors but it wont run.
Batch File: ccminer.exe -a scrypt -o stratum+tcp://eu.clevermining.com:3333 -u 1J1VtVckxBmoqBTtWLfV5nfSbsHPVTPkrV -p x
CMD: Try 'ccminer --help' for more information.
Switch to cgminer 3.7.2 more stability for gpu mining, gridseed. Thanks mate, just downloaded it. but i have a new issue. i ran this batch file: cgminer.exe -o stratum+tcp://ziftr.betarigs.com:3333 -u MitchAgedon.WorkerAgedon -p 1234 then the program runs and says there is an error, failed to init gpu. it also says decrease tc or increase . Change inside the bat file with this: cgminer.exe --scrypt -o stratum+tcp://eu.clevermining.com:3333 -u YOUR_BTC_ADDRESS -p x This is the Batch file i am running now: cgminer.exe --scrypt -o stratum+tcp://eu.clevermining.com:3333 -u 1J1VtVckxBmoqBTtWLfV5nfSbsHPVTPkrV -p x -T still not working. it returns with "invalid config option --kernel: cannot specify a kernel with scrypt." I removed the Kernel line of code from the config whooch seems to have fixed that. but now when run it returns "Error -61:clCreateBuffer <padbuffer8>, decrease tc or increase lg" "Failed to init gpu thread 0, disabling device 0" in then left it running and it is detecting blocks but said "requested work restart" Try using this inside bat file: setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_USE_SYNC_OBJECTS 1 cgminer.exe --scrypt -o stratum+tcp://eu.clevermining.com:3333 -u YOUR_BTC_ADDRESS -p d=512 "requested work restart" happen because of speed of your internet connection are slow or you are to far from the mining pool server. That is from what I reading on all over place. I do hope if admin will able opening server in ASIA too because your miner from asia is quite increasing than europe. i ran this in a batch file and its the same problem. cant initialize gpu. i dont know if this will help but im running on a GeForce GT 740M gpu on my laptop. and what does tc and lg mean. Mining on a laptop CPU or GPU is not a very good idea. You can damage the laptop with the excessive heat it will generate. |
|
|
|
Hello Team,
I request you to please check your systems I have not received my payouts since 11th of July 2015. Its holding more that 1BTC at the moment.
My username is: 1Gt5ZEZyBLW4NSf37XiAGm7YYZ5rtyfKux
Regards
Tanjence
Wow awesome earning, I wonder how big your mining rig kh are you using mate? I am using those Knc Titans. Right now I have 9 cubes functioning at their full capacity. I have 10 more but no more money to buy power supplies. Waiting for someone to borrow =D You can use your BTC to buy power supplies direct from newegg.com. Bitmain is selling a PSU now too which you can pay for with BTC. What is your failure rate on those cubes? I hear they are very temperamental and that KNC support is non-existent. I also understood them to be 300 MHs and people said you were only doing about 750. Nine of them should be about 2700 MHs. Nah!, So the Batch one KnC titan had 4 cubes and batch 2 is 5 cubes. I am running 9 cubes total with 75MH/cube. Wait so only 75 MHs per cube? Those things are supposed to be 300+ MHs each. I had heard that they tended to crap out a lot but if you are only getting 75 MHs per cube (and with 9 cubes no less) that seems a lot worse even then I had been led to believe.EDIT: Ah I think I understand now, so the batch one titan actually consisted of 4 cubes that all connected to the same controller and the whole setup was supposed to be 300+ MHs? And the batch two I guess from what you are saying included 5 cubes so that was how they came up with the 400+ MHs? That actually helps explain the insane shipping costs on these things. I was thinking they were sold a single cube at a time. |
|
|
|
Hello Team,
I request you to please check your systems I have not received my payouts since 11th of July 2015. Its holding more that 1BTC at the moment.
My username is: 1Gt5ZEZyBLW4NSf37XiAGm7YYZ5rtyfKux
Regards
Tanjence
Wow awesome earning, I wonder how big your mining rig kh are you using mate? I am using those Knc Titans. Right now I have 9 cubes functioning at their full capacity. I have 10 more but no more money to buy power supplies. Waiting for someone to borrow =D You can use your BTC to buy power supplies direct from newegg.com. Bitmain is selling a PSU now too which you can pay for with BTC. What is your failure rate on those cubes? I hear they are very temperamental and that KNC support is non-existent. I also understood them to be 300 MHs and people said you were only doing about 750. Nine of them should be about 2700 MHs. |
|
|
|
Hmmm...
blockchain.info regarding the last payout:
Transaction rejected by our node. Reason: The Maximum number of outputs in a single transaction is 200
I have never seen that. Do miners still pick up these transactions? Seem like I have seen transactions exceed 200 outputs before from BTC mining pools...
It was included in the first block mined after transaction was sent and blockchain.info shows it now: https://blockchain.info/tx/3cf3c92ff0615cedf3647db4bddb9c0fa98ae69439798941a7130023b45cc779Yeah I saw that. So I guess they won't relay it but as a block explorer they have no choice but to include it once it gets mined. |
|
|
|
|
Hmmm...
blockchain.info regarding the last payout:
Transaction rejected by our node. Reason: The Maximum number of outputs in a single transaction is 200
I have never seen that. Do miners still pick up these transactions? Seem like I have seen transactions exceed 200 outputs before from BTC mining pools...
|
|
|
|
Hello Team,
I request you to please check your systems I have not received my payouts since 11th of July 2015. Its holding more that 1BTC at the moment.
My username is: 1Gt5ZEZyBLW4NSf37XiAGm7YYZ5rtyfKux
Regards
Tanjence
Read back a page or two. BTC wallet is syncing on the pool side and it is taking some time. Payout should probably come today. |
|
|
|
|
Show Posts
