I ask marto to use terminal screw on my HEX16A since my PSU not modular & only had MOLEX on 1 line cable only. Accidentally when loosen ground screw, the terminal screw blue body push the smd capacitor and the capacitor detached from solder pad . Since i don't had smd rework station, so it's was really hard to solder with soldering iron. But i manage to do with 2 soldering iron. So marto, maybe you can consider to move that 2 capasitor a bit
|
|
|
Nice, i can't wait to see what happen when you put the Electrolytic Capacitors Will the 4 pin molex be the only power connector? Or people can choose between terminal screw?
|
|
|
Sorry We removed it as an option as there were some power conflicts. No chaining , just use USB HUB
I see, thanks
|
|
|
Marto, since my board already here, then i want to ask about CAN chaining. Is it really not available or i need to solder some pin? I am willing to do it, just tell me what to do
|
|
|
Again verry sorry for the inconvinience. In the future for all sendings out of EU We'll use UPS or FEDEX
I prefer UPS By the way is it ok to send the shipping cost to your btc address: 12DNdacCtUZ99qcP74FwchaCPzeDL9Voff ?
|
|
|
@zich not so speedy after all Yeah, that what i tell speedy today Until now there is no update in speedy tracking page. So basically the tracking number from speedy is useless This is what they call "TRACKING" Shipment number: 60046xxxxxx Date Operation Settlement 2013-10-15 20:35:31 Courier Pick-up SOFIA 2013-11-11 15:55:00 Delivered SOFIA
|
|
|
cgminer updated from version 3.5.1 to 3.6.1 any updete so far ? and request to compile with --enable-bflsc option please TPLINK TL-MR3020 image with cgminer 3.6.4 Link: FactoryLink: SysUpgradeWhat news: 0.0.5:
* cgminer updated to 3.6.4 rev 273b04be62a69b2fcfa95790b99822a0bcfd8e75 * cgminer patch to cgminer 3.6.4 rev 273b04be62a69b2fcfa95790b99822a0bcfd8e75.patch * openwrt updated to r38461 * add cgminer monitor script * stay in sync with official cgminer git and build fresh openwrt images * add auto frequency adjustment support avalon-auto style * add configuration options (voltage and clock) per board based on HEX16A serial number
Best results in terms of stability and clocking are observed at 1460mV core voltage + 480 MHz Clock
|
|
|
Ok, I feel stupid for not remembering this sooner: OpenWrt does not have a hidapi package, and thus BFGMiner for OpenWrt does not support NanoFury or HashBuster devices. Unfortunately, OpenWrt seems to be a mostly-dead project these days, and I doubt it will be easy for someone to get a new package added... If someone has the time to write one, however, I'd be glad to merge it into the BFGMiner OpenWrt packaging stuff in the meantime Thanks Luke
|
|
|
3.5.1 please.
Still 0 devices, but better. root@OpenWrt:~# bfgminer -D -d? [2013-11-10 11:55:22] setrlimit: Soft fd limit not being changed from 1024 (FD_SETSIZE=1024; hard limit=4096) [2013-11-10 11:55:22] Started bfgminer 3.5.1 [2013-11-10 11:55:22] lowlevel_scan: Found usb device at usb:001:005 (path=(null), vid=04d8, pid=00de, manuf=Microchip Technology Inc., prod=NanoFury NF1 v0.6, serial=0000073607) [2013-11-10 11:55:22] lowlevel_scan: Found usb device at usb:001:004 (path=(null), vid=125f, pid=102f, manuf=USB 2.0, prod=USB Flash Drive, serial=A200000000000397) [2013-11-10 11:55:22] lowlevel_scan: Found usb device at usb:001:003 (path=(null), vid=1a40, pid=0101, manuf=(null), prod=USB 2.0 Hub, serial=(null)) [2013-11-10 11:55:22] lowlevel_scan: Found usb device at usb:001:002 (path=(null), vid=1a40, pid=0101, manuf=(null), prod=USB 2.0 Hub, serial=(null)) [2013-11-10 11:55:22] lowlevel_scan: Found usb device at usb:001:001 (path=(null), vid=1d6b, pid=0002, manuf=Linux 3.3.8 ehci_hcd, prod=Generic Platform EHCI Controller, serial=ehci-platform) [2013-11-10 11:55:22] DISPLAY not set, setting :0 just in case [2013-11-10 11:55:22] Failed to load OpenCL library, no GPUs usable [2013-11-10 11:55:22] Devices detected: [2013-11-10 11:55:22] Timers: Using clock_gettime(CLOCK_MONOTONIC) 0 devices listed root@OpenWrt:~#
|
|
|
root@OpenWrt:~# bfgminer -D -d? [2013-11-10 10:46:28] setrlimit: Soft fd limit not being changed from 1024 (FD_SETSIZE=1024; hard limit=4096) [2013-11-10 10:46:28] Started bfgminer 3.4.0 [2013-11-10 10:46:28] ft232r_scan: Found 1d6b:0002 - not a ft232r [2013-11-10 10:46:28] ft232r_scan: Found 1a40:0101 - not a ft232r [2013-11-10 10:46:28] ft232r_scan: Found 1a40:0101 - not a ft232r [2013-11-10 10:46:28] ft232r_scan: Found 125f:102f - not a ft232r [2013-11-10 10:46:28] ft232r_scan: Found 04d8:00de - not a ft232r [2013-11-10 10:46:28] Not a ZTEX device 1d6b:0002 [2013-11-10 10:46:28] Not a ZTEX device 1a40:0101 [2013-11-10 10:46:28] Not a ZTEX device 1a40:0101 [2013-11-10 10:46:28] Not a ZTEX device 125f:102f [2013-11-10 10:46:28] Not a ZTEX device 04d8:00de [2013-11-10 10:46:28] DISPLAY not set, setting :0 just in case [2013-11-10 10:46:28] Failed to load OpenCL library, no GPUs usable [2013-11-10 10:46:28] Devices detected: [2013-11-10 10:46:28] Timers: Using clock_gettime(CLOCK_MONOTONIC) 0 devices listed
Nanofury is in: Bus 001 Device 006: ID 04d8:00de Microchip Technology, Inc.
|
|
|
What problems are you having?
It seem bfgminer not found the nanofury. bfgminer version 3.4.0 - Started: [2013-11-10 10:31:27] - [ 0 days 00:00:18] [M]anage devices [P]ool management [S]ettings [D]isplay options [H]elp [Q]uit Connected to stratum.btcguild.com diff 2 with stratum as user xxxx Block: ...a43d4b31 #268768 Diff:511M ( 3.66Ph/s) Started: [10:31:27] ST:2 F:0 NB:1 AS:0 BW:[144/ 91 B/s] E:0.00 I: 0.00 BTC/hr BS:0 0 | 0.0/ 0.0/ 0.0 h/s | A:0 R:0+0(none) HW:0/none -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- [2013-11-10 10:30:56] Waiting for devices; press 'M+' to add, or 'Q' to quit [2013-11-10 10:30:56] Need to specify at least one pool server. [2013-11-10 10:31:26] Pool 0 http://stratum.btcguild.com:3333 alive [2013-11-10 10:31:26] Probing for an alive pool [2013-11-10 10:31:26] Pool 0 http://stratum.btcguild.com:3333 alive [2013-11-10 10:31:27] Network difficulty changed to 511M ( 3.66Ph/s) [2013-11-10 10:31:33] Stratum from pool 0 requested work update [2013-11-10 10:31:33] Pool 0 is hiding block contents from us
|
|
|
Hi luke, i am trying to run bfgminer 3.4.0 or 3.5.1 with nanofury on openwrt ar71xx(TL-MR3020) with no luck. Any idea what i miss? Thanks. root@OpenWrt:~# lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 1a40:0101 TERMINUS TECHNOLOGY INC. USB-2.0 4-Port HUB Bus 001 Device 003: ID 1a40:0101 TERMINUS TECHNOLOGY INC. USB-2.0 4-Port HUB Bus 001 Device 005: ID 125f:102f A-DATA Technology Co., Ltd. Bus 001 Device 007: ID 04d8:00de Microchip Technology, Inc.
|
|
|
Hi Marto, surprisingly the nanofuries already arrived with UPS while the HEX16A still in the middle of nowhere with speedy. Thanks for the compensation marto.
So far i only manage to make the nanofury work with bfgminer on win7.
Any idea how to make it work on TPLINK TL-MR3020?
|
|
|
It's been 2 day i fail to send question on speedy site. So i can not ask them what happen to my parcel.
|
|
|
Again speedy so funny So you need to threatened take parcel back to make they move.
|
|
|
Enough is enough I'm going to get it from there and ship it with DHL 12 o'clock sorry again I'm going to switch sending out of Europe to UPS or Fexex As a compensation You'll get 2 nanofuries in your package
Thanks marto. I hope it's will went well with DHL.
|
|
|
Speedy so funny International Nov 04 at 3:36 PM Hello, I’m sorry for the delay but we are waiting for instructions from the consigner. Best regards, Magdalena Shishkova International clients specialist Speedy JSC 0 7001 8001 www.speedy.bg
|
|
|
Yes If it's not out of BG until monday I'll take it and send it to you with 12 o'clock DHL worldwide
Ok. Thanks
|
|
|
|