Hit escape
then hit the COLON which is ":"
then type
wq
then
<enter>
where i have to type ? could you please help me (and us I think) with a screenshot?
I'm so sorry, I'm a beginner !
If you don't know how to SSH into your Miner with PuTTY then there is going to have to be some payment for me to write you a tutorial with screen shots.
Here are the full instructions, hopefully you know how to SSH into your Miner with PuTTY
DISCLAIMER: Not my fault if you blow it up! Smiley
Ok first make sure your Miner is updated with the .99 Firmware (tuning)
Then with Putty SSH into your miner
login with your root ID
and your password
type:
screen -r
You will see cgminer running.
Hit Q to stop cgminer
then type this at the command prompt:
vi /etc/init.d/cgminer.sh
Use the cursor keys on your keyboard to scroll down till you see this code:
Look for the line that says:
cmd=$(printf "0x86,0x%02X,0x01,0xF1" $c)
NOTE: some of the characters at the end (especially the F1) may be different.
The key is the line with the 0x86, when you see that you are on the right line.
change this:
cmd=$(printf "0x86,0x%02X,0x01,0xF1" $c)
to this:
cmd=$(printf "0x86,0x%02X,0x02,0x11" $c)
Hit escape when finished. Then hit the : key, then x to save and exit
relaunch cgminer with the command line:
/etc/init.d/cgminer.sh restart
You should then see cgminer and you should be hashing between 150-154 per module. (Saturn should be 300-310GH)
NOTE:
If you don't know how to use VI then you can screw things up
here is a shortcut,
when you move the cursor over the 1 in "0x01" that you want to change to a 2, do this:
hit r
then hit 2
and it should Replace the 1 with a 2
then do the same with the F
hit r
then hit 1
Hit escape
then hit the COLON which is ":"
then type
wq
then
<enter>