https://www.dropbox.com/s/ovsibs4jh1cyib5/Captura%20de%20pantalla%202018-06-16%20a%20las%206.12.02.png?dl=0A question Patrike, you see that I have customized the progress, I look a lot Coins / day, but I get the impression that the% correction of the pool is not applied. If I use all the miners in the same currency and see the estimate of the day, it gives me a value. If I add the estimate of all the currencies of each rig, it gives me a much lower amount. One example would be estimated 1,100,000 satochis estimated per day, but if I count the coins multiplying by their value, I barely reach 700,000 satochis. Could it be that it is not applied there the percentage of correction of the pool in% ?? The profit factor is not applied for the coins/day calculations. It's only applied when displaying actual revenue and profit numbers. What I would do is to see if it can be added the coins-per-day formula as well. |
|
|
|
updated to 5.1.5, no conversion to euro, only show btc and usd
Please make sure nothing is blocking Awesome Miner from making a connection to the Cloud Services, where the exchange rates are downloaded. Can you open this URL on the computer running Awesome Miner to make sure you can connect: https://5aozpdg9s2.execute-api.us-east-1.amazonaws.com/Please note that the message you should receive when accessing from a web browser is "message: Forbidden", but that indicates that you are at least able to make the connection. If you still experience the issue, please send me your Awesome Miner log file. Thanks! |
|
|
|
Hello, I updated awesome miner and now my scripts are broken again. The rules now just crashes awesomeminer when run now, this is after I added a 5 seconds wait in my rules to start, update templlate and then start a miner. If I remove the wait I get back to the template is applied but then miner is not started.  Any fix for this? Is it possible to download older version of Awesome miner? I have to kill awesome miner in task manager. It seems I cant run any rule. I found that the log file was over 100mb, I deleted that and now everything is working again  . I guess I am doing something wrong. If you run into this issue again - could you please send me your log file by e-mail and I can take a look at the scenario. Thanks! |
|
|
|
Hello Patrike. I somehow got a virus on my main rig. I was unable to get it cleared out, (It kept respawning a day later), and I decided it would be wisest to backup my config, format the drive and reinstall Windows 10 Pro. So, after reinstalling all my drivers and getting everything set back up, I was back off mining again. So, my problem is that it will stop mining and says mining process failed. This happens only on my custom software. The first couple times it was windows defender deleting Excavator, and Claymore cryptonight cpu miner. I disabled Windows defender, and then it happened again with Excavator. I went to the Excavator folder, and the .exe was still there this time. I clicked it manually, and it opened right up. I tried again from Awesome miner, and still no dice. So, I checked the diagnostics, and it said "file not found". So, I went back into the profit profile, and pointed it to Excavator again. Now it worked again. Weird. So this repeated itself 5 or 6 times over the corse of the night with Excavator, Claymore Cryptonote CPU miner, and Nevermore miner. (The custom ones I installed myself) I woke up to the miner stopped also. In all cases repointing to the exe file fixes it. Hoping you have some advice for me, I need to keep this rig up. Thank you for all your hard work and assistance.
Update:This has been happening all day. I noticed a couple things that might help identify what's going wrong here. When I hit the button to enter the screen where you specify the path for the mining software, it appears that the correct location is selected in the box already, but when I hit the button to navigate to the software, it starts me out at the location of the last software that couldn't be found. For example, if excavator won't start and I help it find the excavator file, then an hour later it may try to switch to nevermore, and it can't find it. I go to help it out, and it shows the correct nevermore path in the box, but when I go to specify the path, it starts me in the excavator folder, I correct it, then an hour later the cpu miner (on a seperate profile btw) can't find the Cryptonote cpu miner, and I go to show it the location and it starts me out in the Nevermore folder, etc. Hopefully this helps. Thank you.
This sounds like a strange scenario. When you say you had to re-point to the exe-file, was the path at all changed in the text box? Opening the dialog and pointing to the same file again shouldn't make any change to the content of the text box? When Awesome Miner says that the file wasn't found in the Diagnostics wasn't found, it also lists the exact path and filename it tried to use. If you copy this path and run it, it should be a good indication if any part of the path or the file itself is missing. The fact that the file browsing dialog is showing another path when you browse is just a UI issue where Awesome Miner doesn't explicitly tell the Windows file dialog to automatically browse to the folder you have specified. Instead the file dialog shows the folder where you where browsing the last time. This doesn't have any impact on the actual path configuration, but I will see if I can improve this UI behavior. On my local pc with Nevermore miner AM fails to find the file. I set the Path %\AppData\Local|AwesomeMiner\Nevermore\ but the Diagnostics shows: "Added rule for: C:\ProgramData\AwesomeMinerService\UploadedSoftware\nevermore-v0.2.3-win64" Also there is no UploadedSoftware folder on the local machine. Then I reset to the correct path in Mining Software Configuration, but eventually with Profit Switching Nevermore fails to start again. Also happens on 4 of my remote miners. Starting Diagnostics. Awesome Miner version: 5.1 Starting Mining Software Setting up Miner Engine. Instance: 1 Engine Type: 4, Auto Download: False, EnginePath: nevermore-v0.2.3-win64\nevermore-win64\ccminer.exe, Subtype: Disabled, CustomExecutable: Added rule for: C:\ProgramData\AwesomeMinerService\UploadedSoftware\nevermore-v0.2.3-win64\nevermore-win64\ccminer.exe C:\ProgramData\AwesomeMinerService\UploadedSoftware\nevermore-v0.2.3-win64\nevermore-win64\ccminer.exe -a x16r -o stratum+tcp://x16r.mine.zpool.ca:3636 -u Hp.155 -p x -b 0.0.0.0:4028 (WindowMode: ConsoleFormat, EngineType: 4, IsProfitMiner: True) Configuration: Failed to start miner process: The system cannot find the file specified What Awesome Miner is doing when a path doesn't start with "C:\" or similar, is making the assumption that it's a relative path based on uploaded mining software. That's why this folder is used: C:\ProgramData\AwesomeMinerService\UploadedSoftware\nevermore-v0.2.3-win64\nevermore-win64 I can see if this can be changed so you can use "%appdata%" variables in the path as well - but to workaround the issue right now - can you specify the full path starting with "C:\"? |
|
|
|
Version 5.1.5 (Development preview of 5.2) doesn't somehow upgrade and install, i'am stuck ...
Running currently: 5.1.3
Tried upgrading, tried downloading seperatly, tried everything, just doesn't work on my end this time.
When i manually try to upgrade at some point i get a %appdate% missing install package message.
When i automaticlly upgrade no problem at all other than it obviously doesn't upgrade as i still see the update icon on Awesomeminer with the same update and current version.
I had many releases bevor the same problem, but than back the manual update at least worked...
Only me with this problem? Any ideas?
The Awesome Miner installer is based on the Windows Installer concept, where the uninstallation requires Windows to keep track of the installed software. In case Windows is unable to perform an upgrade or uninstallation, please use this tool from Microsoft to force the removal. https://support.microsoft.com/en-us/help/17588/fix-problems-that-block-programs-from-being-installed-or-removed |
|
|
|
patrikeCurrent versions of the icons (because they do not stand still and change), for example MZC / ONX / XMY and etc. https://yadi.sk/d/_2ZrfhxI3WoaXxAfter updating 5.1.4, the mapping in RUB works incorrectly (increasing the profit by a factor of TEN), in USD everything is displayed as it should Hi, Thanks for the icons. I just made version 5.1.5 available because of the issue related to non-USD display currencies. Please upgrade and give it a try. |
|
|
|
Just got my Innosilicon A9Z up and running. Any plans to add support?
In the past, all Innosilicon miners was almost identical from a monitoring point of view. Have you tested it with Awesome Miner? You may have to enable the API access on the miner first. For general information on how it was configured on other Innosilicon miners, please see: http://www.awesomeminer.com/help/innosilicon.aspx |
|
|
|
|
Awesome Miner version 5.1.4 (Development preview of 5.2)
- Added setting to enable GPU monitoring information for Generic Miners, to display GPU information even if the mining software doesn't provide any monitoring interface
- Added setting to disable the system monitoring information that Awesome Miner can provide
- Added rule trigger for detecting miner tags and an action to modify tags of a miner
- The feature for multiple user accounts for the built-in web interface can be used without the requirement of Enable Authentication to be enabled for the application.
- Added new algorithms, including Phi2 and more Cryptonight variants
- Updated list of predefined pools with new algorithms added
- Make SHA-256 pools from the predefined Online Services available everywhere, as for all other algorithms
- Antminer diagnostics improved to give more detailed messages about connection issues
- Added additional coin images
- Adjusted algorithm mappings for CoinCalculators.io
- SRBminer support updated for the new Cryptonight variants
- Ccminer 2.2.6
- Ravencoin Miner 2.6
- PhoenixMiner 3.0c
- Correction to the display of ASIC mining information via the web interface
- Correction to revenue calculations for a few new Cryptonight algorithms
- Correction to Bminer as an External Miner where the pool wasn't displayed as enabled
- Correction to the restore of splitter position in the miner list
- Correction to display of per month revenue per miner when not using USD as display currency
- Miner corrections
To get access to development versions, open the Options dialog in Awesome Miner. In the General section, enable Check for development versions. Then go to the Menu and click Check for updates
|
|
|
|
Does anybody have an issue with the appearance of CN-lite coins? I cannot get any to show regardless of which statistics provider I choose or if I manually add the JSON.
Can you check if these are made visible via the Options dialog, Algorithms section. I had a number of them hidden by default, but from now on I will make them visible by default. I have all coins enabled in the algorithms section and I still do not have any CN-lite coins appearing. They were showing in the past, but I had a system crash and had to reinstall and used a previous configuration file, which is why I was wondering if anyone else was experiencing the same issues before jumping to any conclusions. It may be an issue on my end, but I would like any help. Try adding custom algos named as the json providers used, exactly character by character. then map the coin to the predefined algo. or point your software to use the custom algo. eg, I had problem with KeccakC where CREA wasn't visible regardless manual JSON input, resolved after adding custom algo "Keccak-C" I've made some updates to the next release to correct a few of these algorithm mappings. It's basically that the API's of these coin sources have names that Awesome Miner must be able to detect, and recently there have been quite a number of changes, mainly related to all the new Cryptonight variants. If you find out any more of these mapping issues, please let me know. Also note that the new feature in Options dialog, Statistics section, "Override coin algorithm" can also be used to force a coin to a specific algorithm in Awesome Miner. |
|
|
|
https://www.dropbox.com/s/lcshiwit66ynkdf/Captura%20de%20pantalla%202018-06-14%20a%20las%2018.28.43.png?dl=0200.json vivo I, as another user comments, I am having problems in some currency. I can give the example of the VIVO coin in Neoscrypt. LA I have added so much for the .json of WTM and the url of Coinscalculator, as you can see in the capture. But it does not appear in the list of currencies, and two days ago if it appeared. It seems strange to me that even when I add them, the coin does not appear again. Then on the other hand I saw a behavior that is strange in the swtich car, sometimes it changes to a lower yield currency. And I have a 16% profit difference. I miss it because of 5 rigs, sometimes the 5 mines the same, and suddenly 2 or 3, they change to another less profitable currency than in which it was before, and I know that the previous currency is more profitable because I see its profit in the other rigs that do not change. Do not explain yourself better, but something strange happens with the swtich car. Vivo works out-of-the-box with both WhatToMine and CoinCalculators when I test right now. Do you see them now, so it was just temporary disabled from these sites? There have been a number of instances where a coin goes away (and that can often be verified by looking it up on for example WhatToMine web site, where it could be indicated as not being active anymore), and later on it's added back. Please note that the profit switcher operates on the hashrates and profit as defined in the profit profile. You can right click on a miner and select View Details to verify this. If an algorithm is configured with a hashrate higher than what your miners can perform, the profit switcher will make decisions that can result in selecting a coin that is less profitable. |
|
|
|
Is it worth even trying to get this setup just to hobby mine with my nvida 1080? Last time I tried it I kept getting a bunch of error codes so just trying to figure out if it's worth getting it setup and troubleshooting it lol
Hi, Although the benefit of Awesome Miner increases with the number of miners you have, there are still quite a number of users running it with just one or two miners. A good place to start is to setup with the profit switching feature: http://www.awesomeminer.com/help/profitswitching.aspx#profitsingleIf you run into any issues, please use the Diagnostics button in the toolbar and share the results. Thanks! |
|
|
|
Hello Patrike. I somehow got a virus on my main rig. I was unable to get it cleared out, (It kept respawning a day later), and I decided it would be wisest to backup my config, format the drive and reinstall Windows 10 Pro. So, after reinstalling all my drivers and getting everything set back up, I was back off mining again. So, my problem is that it will stop mining and says mining process failed. This happens only on my custom software. The first couple times it was windows defender deleting Excavator, and Claymore cryptonight cpu miner. I disabled Windows defender, and then it happened again with Excavator. I went to the Excavator folder, and the .exe was still there this time. I clicked it manually, and it opened right up. I tried again from Awesome miner, and still no dice. So, I checked the diagnostics, and it said "file not found". So, I went back into the profit profile, and pointed it to Excavator again. Now it worked again. Weird. So this repeated itself 5 or 6 times over the corse of the night with Excavator, Claymore Cryptonote CPU miner, and Nevermore miner. (The custom ones I installed myself) I woke up to the miner stopped also. In all cases repointing to the exe file fixes it. Hoping you have some advice for me, I need to keep this rig up. Thank you for all your hard work and assistance.
Update:This has been happening all day. I noticed a couple things that might help identify what's going wrong here. When I hit the button to enter the screen where you specify the path for the mining software, it appears that the correct location is selected in the box already, but when I hit the button to navigate to the software, it starts me out at the location of the last software that couldn't be found. For example, if excavator won't start and I help it find the excavator file, then an hour later it may try to switch to nevermore, and it can't find it. I go to help it out, and it shows the correct nevermore path in the box, but when I go to specify the path, it starts me in the excavator folder, I correct it, then an hour later the cpu miner (on a seperate profile btw) can't find the Cryptonote cpu miner, and I go to show it the location and it starts me out in the Nevermore folder, etc. Hopefully this helps. Thank you.
This sounds like a strange scenario. When you say you had to re-point to the exe-file, was the path at all changed in the text box? Opening the dialog and pointing to the same file again shouldn't make any change to the content of the text box? When Awesome Miner says that the file wasn't found in the Diagnostics wasn't found, it also lists the exact path and filename it tried to use. If you copy this path and run it, it should be a good indication if any part of the path or the file itself is missing. The fact that the file browsing dialog is showing another path when you browse is just a UI issue where Awesome Miner doesn't explicitly tell the Windows file dialog to automatically browse to the folder you have specified. Instead the file dialog shows the folder where you where browsing the last time. This doesn't have any impact on the actual path configuration, but I will see if I can improve this UI behavior. |
|
|
|
I can't find if there is a dynamic way to put the rigname in password field.
Any kind of substitution tags for custom pools ?
You should be able to use [MinerWorker] in the password field. That's perfect ! A little cold review / point of view about coincalculators.io api instead of whattomine : 1/ Coin price : they are currently exposing a faulty average 24h price. In fact they expose highest 24h price. I already submitted a request to fix this. Maybe you will have more weight if you ask them to fix it. If they can also expose current price that would be great. 2/ Difficulty : they expose a very convenient 3h average difficulty. 24h average is generally too long to follow intra day big waves. Current difficulty is too short to avoid "Dirac". Can we have the option to choose this difficulty ? 3/ Caching : it may not be related but when you apply custom properties to a coin listed by cc.io, it seems like those new values are not taken into profitability calculations (miner side). Starting/Stopping miner doesn't perform a new profitability recalc, even after switching interval. Another request related to "coins" display : Can you split columns Revenue/Profit like it's already done in "online services" ? Thanks for your work Thanks for sharing this information and for your feature request. 2) Awesome Miner can either pick currentDifficulty or difficulty24, depending on if you have configured the Current or 24h avg mode in the Options dialog, Statistics section. 3) Although the API let you make queries that gives other revenue calculations in the API response - these numbers are not used by Awesome Miner. Awesome Miner only uses information like difficulty, block time/reward and exchange rate in order to calculate the revenue based on the hashrate and power cost you have in Awesome Miner. |
|
|
|
Does anybody have an issue with the appearance of CN-lite coins? I cannot get any to show regardless of which statistics provider I choose or if I manually add the JSON.
Can you check if these are made visible via the Options dialog, Algorithms section. I had a number of them hidden by default, but from now on I will make them visible by default. |
|
|
|
Since earlier this month, Awesome Miner supports setting the Default Pools on Dragonmint miners using this API. You can find the feature in the toolbar Tools -> ASIC -> DragonMint Default Pools. |
|
|
|
To see if someone can help me, I want to customize "customize progress".
I would like to add, difficulty and currency price. I do not know how to do the line to add it and customize it. There are 3 fields, in the third I have coins / days
Can somebody help me.
It's not yet possible to bring in the additional coin statistics you are requesting. I will note your feature request. |
|
|
|
does it work with enemyminer and sg miner and allow an easy way to switch pools or coins/algo like
x16r to x16s on the fly for selected rigs in a list ?
Sgminer and many other mining software are supported, but enemyminer is not yet supported. You can use Awesome Miner to change algorithm and pools for many miners in a single operation. |
|
|
|
Hello,
I'm interested in use the software. I want to have my rigs in a housing/hosting place and control them from my home with RDP. ¿How many paid licenses do I need?
Hi. The license is based on the number of mining rigs/computers you have. If you have a total of 10 miners for example, you will need the Professional Edition that can be used for up to 10 miners. |
|
|
|
Hi Patrike,
There appears to be a glitch with the manual algo configuration for coin statistics.
I have manually entered XTL on the page as using algo CryptoNight StelliteV4, but when I close the window, the profitability data for the coin drops to 0 even though it has active difficulty and pricing data, If I remove the custom algo change, profitability data returns to the correct figures.
Thanks for reporting this scenario - I've just implemented a correction for it. It turns out that the mapping to another algorithm works fine, but some of the latest Cryptonight variants (like StelliteV4) wasn't calculated correctly for coins-per-day by Awesome Miner, resulting in a close to zero revenue. |
|
|
|
|
Show Posts
