We have over 100 miners at our location. I want to create a rule so I get a single notification if 10 or more miners are offline all at the same time. How do I do that?
Thanks
There are no built-in triggers that can handle the scenario you describe. It might be possible to resolve with a C# script trigger - but I need to get back to you on this because I don't have any ready solution for it. |
|
|
|
patrikeProblems continue in the network, and as a result, the reported profit is 750k $ / month!!!!! I suggest either to highlight this problematic coin in color, or to hide it on the “Coins” tab until you solve problems in the network. http://images2.imagebam.com/03/e2/bd/8095981002744754.PNG I wasn't able to catch exactly what CoinWarz was reporting during this period of time, but I do understand you point about that the end result wasn't correct. There is no specific information in their API's that can inform Awesome Miner about their blockchain sync issues for a specific coin. |
|
|
|
Anyone notice Zpool reporting wrong profit on Equihash? Had my 8x1080ti earning $49 PER day. How can we check this?
Most likely they changed their reporting from mBTC/MHs to mBTC/GHs or something like that. In this case I think it was a temporary issue with a profit number in their API. For all the Yiimp-based pools, Awesome Miner can since a few months ago automatically understand when they make a change from MH to GH reporting for example. This is part of their API reporting these days. |
|
|
|
I don't see QRL coin as an available choice any more? Wasn't it in there before? It's CryptoNight-V7, right?
It's no longer part of the main lists on WhatToMine and CoinCalculators. You can probably add the JSON URL for it manually in the Options dialog, Statistics Proviers section. |
|
|
|
Very good update, please do not forget the OC of the RTX
"cryptopia,graviex,crex24,cryptobridge,hitbtc,coinexhange"
Many and good features for CC, I have left an exchante filter line above, is that correct? or I should add the .com or similar.
I liked being able to delimit the Exchanges, I love the 3 hours, I work always in current because 24 is very excessive, it seems very adequate 3 hours.
Could you tell me if I placed the filter correctly?
Although all these developments are great, it is only for CC. I still think that getting the prices of the exchanges prices and choosing in each currency the exchange and high or low price, would be just perfect, but these advances help a lot, thanks for being a developer that listens to both the community.
Do not forget Shittomine, that would be bestial.
Thank you very much for everything @Patrike, I really appreciate your delivery to the project.
Thanks for your nice feedback. Right now the filtering of exchanges requires you to know the name of the exchange as listed in the CoinCalculators.io API. See: https://www.coincalculators.io/api/allcoins.aspx?hashrate=100000000It's not case sensitive, but otherwise you need to list the same like in the API response above. The only incorrect entry in your example was "coinexhange". That one is not matching anything in the API. Otherwise your example with multiple exchange names looked fine. To answer your question about the order - the order you list the entries are not relevant. You can use any order because Awesome Miner is simply filtering based on the exchanges you list. If you list "cryptopia" and "graviex", Awesome Miner will look at which one of these two have the highest price and give you that highest price. If another exchange has an even higher price, it will be ignored if not part of your filter. If a coin isn't listed on any of these exchanges, Awesome Miner will give you the price of zero, because none of the exchanges you put in your filter is supporting this coin. The idea with the filtering is that you should only enter the few exchanges you have an interest in using. Your other requests have not been forgotten - I always take notes of good and important suggestions and constantly work on improving the software based on this. Thanks! PAtrike would be ideal if you could specify the Exchange in each currency. Because if it is in several and I will give the highest, there is still a mini problem. If at least there was an order of importance as I said before, that if in the line I put before Crex24 that Graviex, heed the order, I could help and not have to do anything in each currency. But if you can not, your thing is that each currency has a field to specify the exchange of CC Can you explain this scenario about Exchanges per coin a bit more? The concept right now is that you enter a few exchanges like Cred24 and Graviex, and then you will only be presented with the rates for those two exchanges. The use case for this is that you probably only have accounts on a few exchanges and then it doesn't make sense to get exchange rates from the others. This scenario is fully supported. With a way of defining Exchanges per coin, would that be if you only want to sell your XMR on Cred24 and only ETH on Graviex for example? Or what would the main benefit be of that detailed level of configuration of exchanges? |
|
|
|
Awesome Miner version 5.7.1
Features and integration
- CoinCalculators.io integration includes exchange rate support for Highest Bid and Lowest Ask (configurable in the Options dialog, Statistics Providers)
- CoinCalculators.io integration includes exchange filter setting, to specify that only specific exchanges should be used when presenting the coin price
- CoinCalculators.io integration improved by allowing configuration of coin difficulty (current, 3h, 6h or 24h)
- Removed support for Zergpool because they have discontinued their services
Hi, patrike. Great features and great support, as always. I think, you can show in Coins->Exchange Rate two more parameters. The exchange from which the data are taken and the volume. Well, we can choose the Highest Bid or the Lowest Ask (actual and realistic price) but if you reflected the volume in the exchange (and the exchange) , we would be able to better evaluate this information. It is not difficult because the information you already have, but it would force you to rethink the graphic design of the section. Thanks for your awesome support. Without a doubt, AM is the reference mining management program Thanks! I agree that the Coins tab should include more of this information. Especially the name of the exchange must be listed in order to make sense of the new settings. I will improve this soon. |
|
|
|
Very good update, please do not forget the OC of the RTX
"cryptopia,graviex,crex24,cryptobridge,hitbtc,coinexhange"
Many and good features for CC, I have left an exchante filter line above, is that correct? or I should add the .com or similar.
I liked being able to delimit the Exchanges, I love the 3 hours, I work always in current because 24 is very excessive, it seems very adequate 3 hours.
Could you tell me if I placed the filter correctly?
Although all these developments are great, it is only for CC. I still think that getting the prices of the exchanges prices and choosing in each currency the exchange and high or low price, would be just perfect, but these advances help a lot, thanks for being a developer that listens to both the community.
Do not forget Shittomine, that would be bestial.
Thank you very much for everything @Patrike, I really appreciate your delivery to the project.
Thanks for your nice feedback. Right now the filtering of exchanges requires you to know the name of the exchange as listed in the CoinCalculators.io API. See: https://www.coincalculators.io/api/allcoins.aspx?hashrate=100000000It's not case sensitive, but otherwise you need to list the same like in the API response above. The only incorrect entry in your example was "coinexhange". That one is not matching anything in the API. Otherwise your example with multiple exchange names looked fine. To answer your question about the order - the order you list the entries are not relevant. You can use any order because Awesome Miner is simply filtering based on the exchanges you list. If you list "cryptopia" and "graviex", Awesome Miner will look at which one of these two have the highest price and give you that highest price. If another exchange has an even higher price, it will be ignored if not part of your filter. If a coin isn't listed on any of these exchanges, Awesome Miner will give you the price of zero, because none of the exchanges you put in your filter is supporting this coin. The idea with the filtering is that you should only enter the few exchanges you have an interest in using. Your other requests have not been forgotten - I always take notes of good and important suggestions and constantly work on improving the software based on this. Thanks! |
|
|
|
If you put in your kw/h price, does awesomeminer automatically choose a lower power algo if it is more profitable due to you having a high electric price or a higher watt algo if your power price is low?
Yes, if Awesome Miner is aware of the power cost and power usage for an algorithm, it's taken into consideration by the profit switcher. Awesome Miner can for that reason select a coin with a little lower revenue if the power usage is low enough to make it the most profitable coin. |
|
|
|
|
Awesome Miner version 5.7.1
ASIC mining
- Added Antminer DR3 (Decred) support
GPU mining
- Added predefined algorithms CryptoNightV8 and X22i
- Improved API parameter setup for Sgminer, to make it less likely to configure incorrectly
Features and integration
- CoinCalculators.io integration includes exchange rate support for Highest Bid and Lowest Ask (configurable in the Options dialog, Statistics Providers)
- CoinCalculators.io integration includes exchange filter setting, to specify that only specific exchanges should be used when presenting the coin price
- CoinCalculators.io integration improved by allowing configuration of coin difficulty (current, 3h, 6h or 24h)
- Removed support for Zergpool because they have discontinued their services
User interface
- Added more coin images
- Release notes for the recent releases can be accessed from the menu at any time
- Release notes presented in a more readable way when informing about a new release
API
- Added HTTP API for returning the unprocessed API data from a miner (/api/miners/(ID)/apireport)
Mining software
- WildRig Multi Miner 0.12.1.1 beta, including offline benchmarking support
- CastXMR 1.5, including CryptoNightV8
Corrections
- Correction to wallet balance for KMD, by introducing another block explorer
|
|
|
|
Hello.
I'm new to the forum.
I started using an awesome miner. I selected 8 pools but after a few days I do not know on which pools he worked. Where can I look at history?
I also fail to add a wallet balance. eg. for the ethereum (web wallet) or, for example, for the bittube windwows10 wallet. Are there more specific guidelines with examples?
Thank you and best regards !
Awesome Miner is currently only including the history of the last 40 pool selection by the profit switcher. Please right click on the miner and select View Details. In the future the plan is to provide better statistics on pools used, mining software used, algorithms used and so on. Some online wallets doesn't expose the true balance on the public block chain, resulting in that the block explorers used by Awesome Miner to get the balance will not be able to tell how much you have on your account. For general information about the balance feature, please see: https://support.awesomeminer.com/support/solutions/articles/35000086031-wallet-balance |
|
|
|
Great theory, but in reality the only coin that matters is Bitcoin. You can pick a few of the 3823 alt coins and 99.99% of them will go to zero. You have very bad odds of getting that 10X or 100X. And even if you are that lucky, guess what? If bitcoin fails, EVERY alt will fail. So I would prefer Awesominer to profit switch algos and pools to instantly convert to bitcoin, which it does. But my only complaint is what Awesominer is telling me I am making per day is no where near reality. Awesomeminer needs to get a better algo or smarter at choosing what coin and pool is best after benchmarking your rig, and be ACCURATE. I don't need something that switches between 50 algos and 4 pools if it doesn't outperform Nicehash app. Don't tell me I am making $2-$4/day/rig when I am really making $1/day (USD from BTC).
You can get a bit more relaistic value if you set Awesome Miner to adjust the pool payout based on past performance. See "Adjust reported revenue": https://support.awesomeminer.com/support/solutions/articles/35000086030-coin-and-profit-statisticsIf a pool constantly is providing profit values that are too high compared to the payout, this feature will automatically lower the profit values based on past performance. Please note that just like the stock market - past performance is no guarantee of future results. The profit numbers provided by the Nicehash pool (that you also can mine using Awesome Miner) is often correct as it's based on what people are buying hashrate for. For many of the other pools, they are reporting what the payout will be based on what is known for the moment - but later on when a coin is traded for BTC on an exchange, it may very well be lower and this is very difficult to predict. |
|
|
|
Hello @patrike, I would like to explain to you one of the problems and the solutions we can have.
Awesome miner is a great program, but it depends on obtaining data from the coins. What happens that according to the source, because WTM, Coinwarz or CC, and maybe some day Shit to mine, each one gives the price of a different site and that many, but that often gives us not real values of price, because we They give the price they want and it does not match our exchanges. In this way efficiency is lost in the auto profit.
I think you should do a job here, because this is the basis of your program. My idea or suggestion, is that even if the data is collected from these webs, the price is deducted directly from the exchanges. The same thing that AW CU does, in which we put the data by hand, but read the prices of the exchanges prices. And best of all, I could say XVG I want the price of Graviex, I mean, to be able to choose for each currency the exchange where I want the price, and if it is not, then the exchange that has a price similar to that of the exchange that I use. I would choose it, and if I do not choose it, I would show the highest one.
It is very frustrating to mine a currency at a higher price than what I am really selling it, because maybe it takes the price of a rare exchange.
Like AW CU, it reads the prices of a dozen exchanges, but always shows the highest and that is unreal, because normally the highest corresponds to a rare exchange of low volume. To be able to increase the amount of coins with shittomine, and to be able to specify in each currency the exchange that I want the price, would make a huge change. Also if left by default it would show the higher price.
But the simple idea of many more currencies, and more realistic prices to the exchanges we work, can make a big difference, but now that the market is so low.
I also consider that what I ask or suggest, is the most important part of this program, the quantity and quality of the data. You can not take whattomine prices that can be different from CC or coinwarz, but being able to choose the exchange where you look at the price per coin, would be a step forward that many would appreciate and raise a step more the quality of Awesome miner in front of their competition.
It is very normal, very recurrent that many times we are undermining with exaggerated prices, for that reason, you should collect the prices of the exchanges, apart from the data of the pages of currency. In two different processes. It gives you more control and many more coins if you add Shittomine
Those that seem good idea, please comment, because if many people support these ideas, patrike will think more.
Since earlier this week, I have been in contact with the admin of ShitToMine about adding API support for Awesome Miner. No decisions are made yet, but I'm open for adding it in Awesome Miner. CoinCalculators.io do have a concept of Highest Bid / Lowest Ask, but they are not yet exposed over their API. I think the Highest Bid is a value that might be of interest for you so I've reached out to them to see if this can be a value to provide to Awesome Miner. UPDATE: This has been sorted out now and I've just finished the implementation in Awesome Miner where you can select if you want CoinCalculator statistics with Highest Bid or Lowest Ask - and as a bonus I also made it configurable to get the coin difficulty based on Current, 3h, 6h or 24h. In addition to the above, I do see your point about being able to get the coin exchange rates directly from the exchanges for the scenarios where the coin statistics providers doesn't deliver an exchange rate that is realistic enough. I will have to explore this a bit more and this could possibly be an improvement that would make sense to add. ask moobidoo (is it written like this?), in AW CU he reads the prices of different exchanges, so it is something that can be done, and then if you also define a pool of a currency, you can choose the Exchange from where you take the price, then the program would be perfect. I remember again that many times it happens that new coins that are in several exchanges, shows the highest value and is usually the smallest exchange without volume, so AW CU also fails in that sense. Being able to choose from the exchange list that you read the prices, the one I use, would certainly be a big step forward The program can have 1000 functions, but the base of the program is the mining and the QUALITY of the data. That quality right now does not exist, sometimes it gives the sale price, sometimes the purchase according to the web where you read it, WTM, CC etc ... at the moment I can say in the pool when defining it, I want the price of CryptoBridge for this currency, the result would be PERFECT. It is the base of Awesome miner, to more data and more quality of the same, better control of the mining and of course of profits. It has already happened too many times to mine at prices that did not correspond to reality. The next release will have a few more settings for CoinCalculators.io in the Options dialog, Statistics Providers section. Can you please try these new exchange rate settings as I think it's a step in the direction you are asking for. |
|
|
|
Tell me URL API to check the balance on the KMD coin Alternatively, coin statistics can be collected from a number of calculators to display the average, since at the moment it costs one of the three calculators to raise the price tag and a bunch of RIG and ASIC under AM control will switch to this coin (let's call this attack 31% *LOL*) https://www.coingecko.comAPI https://www.coingecko.com/api/docs/v3Thank you Can you test this Block Explorer for KMD? https://explorer.komodo.services/api/addr/[address] There should probably be some kind of feature to detect unrealistic profit values - but this will have to be configurable in some way. |
|
|
|
patrike
New WildRig Multi released with --benchmark parameter, so now you can use this for proper measurement.
Thanks - I will include this one and use the new benchmark parameter when the benchmarking is configured to run without pools (offline mode). |
|
|
|
Is there an ETA on the API support? I can't monitor half my farm if I use your miner..
Just before writing this I completed the full API layer supporting the necessary read-only subset of the sgminer API, I'm currently monitoring using Awesome Miner. The remaining parts are (1) adding more stats inside the miner, many values are fudged or hardcoded in my current test version and (2) do some intense testing. I would say that this will be released within 4-5 days with a very high probability, hopefully earlier as well. Thanks for working on the API part. I've received a number of requests from users running Awesome Miner to include support for your mining software. If you have any beta version of the software with API enabled, please send me a PM and I can start the integration work. Thanks! |
|
|
|
I want to turn off a certain notification that keeps popping up.
"Mining process not running, initiating restart (Claymore's Dual Ethereum Miner, Unspecified / Multi-algorithm, Nanopool)"
We are using Claymore on all our miners . The source in the notification is "system."
I tried turning all all Predefined rules and User-defined rules in Awesome Miner notification settings. The notification keeps appearing.
Does anyone know how to stop this notification from coming up? Thanks.
Thanks for your question. Please go to the Options dialog, Notifications section, uncheck "Include system messages as notifications". I think this should resolve the case you describe. |
|
|
|
Today, the profit of miners is almost zero, the cost of equipment decreases almost every day, but at the same time your program, on the contrary, grows in price. Where is the logic?
It would be more logical to give discounts in such long moments of falling.
How do you think?
Hi and thanks for your comments. The last price adjustment for Awesome Miner was in December 2017 (10 months ago) and the change was quite small (at most +20% for some licenses). There is no direct relation between the license cost for Awesome Miner and the profitability of mining. I still hope that you will find the software valuable and that it will save you both time and money when running your mining operations. It is about this that the cost of the license was raised precisely at the peak of the cost of cryptocurrency, and since then, both the equipment and the cryptocurrency have decreased in price several times, and the software has remained at the same level maybe it makes sense to give discounts while the market is in a fall? I am ready to consider a purchase, but only with a good discount Thanks for your feedback. Software pricing is always a difficult topic as there can be many opinions. Please note that the pricing is intended to reflect the value of the software and the included support. Also note that Awesome Miner is much more feature rich today compared to a year ago. Compared to other solutions out there, including those that are less powerful, Awesome Miner is not expensive at all. The idea is to keep the pricing as fair and transparent as possible for everyone. For this reason there are no discounts given for the editions you can buy directly from the web site. |
|
|
|
Hi, sadly, Pinpins decided to close Zergpool today  -We have taken decision to close down the pool. Stratum servers will be stopped during next hours, and all pending earnings payed within next 24h above respective twice less thresholds .
Thank you so much for all support during this journey
pinpinCan you please add https://icemining.ca/ instead? They have really good support, new algos (BCD, x22i, renesis, lbk3..) Thank you very MUCH for your brilliant support (as always  ) Icemining looks like one of the more popular pools right now so I've reached out to them with a request. |
|
|
|
Hello @patrike, I would like to explain to you one of the problems and the solutions we can have.
Awesome miner is a great program, but it depends on obtaining data from the coins. What happens that according to the source, because WTM, Coinwarz or CC, and maybe some day Shit to mine, each one gives the price of a different site and that many, but that often gives us not real values of price, because we They give the price they want and it does not match our exchanges. In this way efficiency is lost in the auto profit.
I think you should do a job here, because this is the basis of your program. My idea or suggestion, is that even if the data is collected from these webs, the price is deducted directly from the exchanges. The same thing that AW CU does, in which we put the data by hand, but read the prices of the exchanges prices. And best of all, I could say XVG I want the price of Graviex, I mean, to be able to choose for each currency the exchange where I want the price, and if it is not, then the exchange that has a price similar to that of the exchange that I use. I would choose it, and if I do not choose it, I would show the highest one.
It is very frustrating to mine a currency at a higher price than what I am really selling it, because maybe it takes the price of a rare exchange.
Like AW CU, it reads the prices of a dozen exchanges, but always shows the highest and that is unreal, because normally the highest corresponds to a rare exchange of low volume. To be able to increase the amount of coins with shittomine, and to be able to specify in each currency the exchange that I want the price, would make a huge change. Also if left by default it would show the higher price.
But the simple idea of many more currencies, and more realistic prices to the exchanges we work, can make a big difference, but now that the market is so low.
I also consider that what I ask or suggest, is the most important part of this program, the quantity and quality of the data. You can not take whattomine prices that can be different from CC or coinwarz, but being able to choose the exchange where you look at the price per coin, would be a step forward that many would appreciate and raise a step more the quality of Awesome miner in front of their competition.
It is very normal, very recurrent that many times we are undermining with exaggerated prices, for that reason, you should collect the prices of the exchanges, apart from the data of the pages of currency. In two different processes. It gives you more control and many more coins if you add Shittomine
Those that seem good idea, please comment, because if many people support these ideas, patrike will think more.
Since earlier this week, I have been in contact with the admin of ShitToMine about adding API support for Awesome Miner. No decisions are made yet, but I'm open for adding it in Awesome Miner. CoinCalculators.io do have a concept of Highest Bid / Lowest Ask, but they are not yet exposed over their API. I think the Highest Bid is a value that might be of interest for you so I've reached out to them to see if this can be a value to provide to Awesome Miner. UPDATE: This has been sorted out now and I've just finished the implementation in Awesome Miner where you can select if you want CoinCalculator statistics with Highest Bid or Lowest Ask - and as a bonus I also made it configurable to get the coin difficulty based on Current, 3h, 6h or 24h. In addition to the above, I do see your point about being able to get the coin exchange rates directly from the exchanges for the scenarios where the coin statistics providers doesn't deliver an exchange rate that is realistic enough. I will have to explore this a bit more and this could possibly be an improvement that would make sense to add. |
|
|
|
|
Show Posts
