claymore "-tt 80" doest that
this should be in next update but i have so many thing going on recently that i it might take a while

i guess it will be more less the same,

Ok fixed, thx for report

i will fix this now , few moments

no, there will ve separate line for rx400 su[port , it will be v2000 perhaps.
anyway i have it working but i dont know if there is sense releasing it if overclocking isnt supported in linux (still isnt , we need to wait some more time)

i could but in order to mining there you neeed account.

I only will be using pools where you can enter ethereum address as worker address.

i started implementing sgminer-gm its in the /root/miner/sgminer-sg
but didnt had time to finish it due to different config managment.

There will be my pool with fee 0% for another few months.
I just have to make one

v1004 Update:
- added new miner option (mining eth only) without siacoin
- i give you guys root password: miner1324
(i dont advice to touch anything or change anything because i if you broke something then i wont help Smiley - it is mostly for debug purpuses or some rare cases when you need to install something
user login info: miner/miner
root login info: root/miner1324

ok the problem is that linux doesnt respect memory,core and voltage values from bios.
It overrides by his own.
So we need to make tool for overclocking and undervolting to get the same results as in windows.

from 2 days i am 100% focusing how to mine rx480 with full hashrate and also with undervolting (in linux). Its very hard... becuase there are no avaible tools for undervolting under linux with rx400 series

anyway, i will integrate sgminer for sure, and meaby ethminer as well.
only rason there is claymore is:
a) it was best when i released distro
b) i dont have time right now to focus on development, i need to pass ubuntu and rx480 and solve few issues, then make few mor rigs for my and my clients and then i could spend more time on simplemining os.

anyway about changing pools ....

there are 2 ways.

a) only my poools will be available (and in future there will be very easy to take 2-3% for my service from this pool)
b) open system for all pool but how will i get my fee (someday when OS will be stable enough) - will be there upfront payment ?
it is hard because i cant do 1$/month for each rig because one rig will have 1 gpu and other will have 6 gpus or more ....

again, i dont want make bad decision and regret that in future
whad do you think guys ? meaby i should do little survey and ask all my users how do they prefer to pay little fee in future: my own pool fee or some depositing...

once again, when i open pools for changing then it will be like this:
- pool fee
- my fee
- meaby miner fee (as it was now with claymore miner)

and now user cant pay 3 times fee - it would be best to pay only one, and that will happen only if he will be using my pool and that will be only one fee to pay ....
thats why i dont want to open pool change - anybody agree with me ? or disagree ?

i have dilema because i could give root password accually because i have nothing to hide and if somebody dont want use my simpleos he will find ubuntu anyway.
Anyway, when some people will install and some stuff and i will make new auto update which will perhaps upgrade linux kernel then modem you just installed could simply stop working
Then you will be angry that i pushed uto update and some other people....
And i know now that there is so much changes in krenel with amdgpu driver that upgrades will be from time to time.
My concept was to make auto-update system which in some cases could fuck up the rig.
(for example internet from usb modem will stop working)
I could give root password but i dont want anybody telling me that something custom of his stopped working.
What do you think ?

All current updates were only updating my custom scripts (to be compatible with new database schema on website simplemining.net.
So most updates wont do damange but when i will do separate system and my scripts updates then in future there could be mess...

I would like to do this the proper way and not to regred my decision in half year.
Anybody have an idea how to make it right ?

Beside that i can release root password becasue "AmoreJaz" made me understand some things.
Ok, so because this password has parts of my other passwords, i will make update which will change root password on all rigs and then i will tell you what it is 

 

hmm, and how about this ?
is this signature check problem

root@simpleminer:~# dmesg | grep amd
[    0.089480] amd_nb: Cannot enumerate AMD northbridges
[    0.718488] amdgpu: module verification failed: signature and/or required key missing - tainting kernel
[    0.721907] [drm] amdgpu kernel modesetting enabled.
[    0.726883] fb: switching to amdgpudrmfb from VESA VGA
[    0.727399] amdgpu 0000:01:00.0: Invalid ROM contents
[    0.727476] amdgpu 0000:01:00.0: VRAM: 4096M 0x0000000000000000 - 0x00000000FFFFFFFF (4096M used)
[    0.727478] amdgpu 0000:01:00.0: GTT: 4096M 0x0000000100000000 - 0x00000001FFFFFFFF
[    0.727550] [drm] amdgpu: 4096M of VRAM memory ready
[    0.727551] [drm] amdgpu: 4096M of GTT memory ready.
[    0.728746] amdgpu 0000:01:00.0: amdgpu: using MSI.
[    0.728784] [drm] amdgpu: irq initialized.
[    0.728920] amdgpu: powerplay initialized
[    0.729157] amdgpu 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000100000008, cpu addr 0xffff880210a50008
[    0.729188] amdgpu 0000:01:00.0: fence driver on ring 1 use gpu addr 0x000000010000001c, cpu addr 0xffff880210a5001c
[    0.729211] amdgpu 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000100000030, cpu addr 0xffff880210a50030
[    0.729232] amdgpu 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000100000044, cpu addr 0xffff880210a50044
[    0.729252] amdgpu 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000100000058, cpu addr 0xffff880210a50058
[    0.729271] amdgpu 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000010000006c, cpu addr 0xffff880210a5006c
[    0.729293] amdgpu 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000100000080, cpu addr 0xffff880210a50080
[    0.729313] amdgpu 0000:01:00.0: fence driver on ring 7 use gpu addr 0x0000000100000094, cpu addr 0xffff880210a50094
[    0.729329] amdgpu 0000:01:00.0: fence driver on ring 8 use gpu addr 0x00000001000000a8, cpu addr 0xffff880210a500a8
[    0.729378] amdgpu 0000:01:00.0: fence driver on ring 9 use gpu addr 0x00000001000000bc, cpu addr 0xffff880210a500bc
[    0.729397] amdgpu 0000:01:00.0: fence driver on ring 10 use gpu addr 0x00000001000000d0, cpu addr 0xffff880210a500d0
[    0.729768] amdgpu 0000:01:00.0: fence driver on ring 11 use gpu addr 0x000000000089c420, cpu addr 0xffffc90001a5a420
[    0.729876] amdgpu 0000:01:00.0: fence driver on ring 12 use gpu addr 0x00000001000000f8, cpu addr 0xffff880210a500f8
[    0.729897] amdgpu 0000:01:00.0: fence driver on ring 13 use gpu addr 0x000000010000010c, cpu addr 0xffff880210a5010c
[    0.976249] fbcon: amdgpudrmfb (fb0) is primary device
[    0.976324] amdgpu 0000:01:00.0: fb0: amdgpudrmfb frame buffer device
[    0.984715] [drm] Initialized amdgpu 3.2.0 20150101 for 0000:01:00.0 on minor 0

with default kernel 4.4 its the same.

i am using bios with 30MH and 100 wattage while in linux :

it is doing 27MH/ and taking 155watts

Here is photo of some sys info, as you see, clocks are ok i guess, but i think that undervolting is not working.

https://tytanick-gmail.tinytake.com/sf/OTcyMzk5XzQwNTkxMDY

Hi guys.

As you know, in linux we cant modify powertune, core, memory and volts.
Thats why i am setting all in Polaris Bios editor.

Anyway strange thing.

In windows card is doing 24MH and takes 120 watt from wall
while booting the same rig in linux takes 150 watt from wall and motre less the same speed (slightly lower)

What is that ? Is windows using some extra options or wattman is doing something while in linux its not  ?

Here are my settings:


 

Can you post in PM your values in polaris editorze?

tell me one importnat thing.
Where do you see this 115W ?
in gpuz stats or from power meter from the wall ?
because gpuz values are not real.
When i tested RX470 yesterday i had those results:
27,3 MH/s 178 watt(wattage metered from the wall and this is card only , i substracted rest of system watts)

My system isnt opensource.
If you want free system then make it yourself.
Sorry but mine is pay for service not opensource.

if you have other ideas i am happy to hear but for now you wont force me to make it YOUR WAY.....

Only you are talking about this whole time.
There is no single one other guy who want the same thing so sory - i wont do system only for you ....
If there will be more people telling the same idea - then i will rethink this.
You - ONE guy - cant change my whole concept, sorry ....

Edit:
All i hear from other people is to pay for this service as fee.
And to achieve that i will have to make own pool, which i will make but or now i dont have time to do this.
Anyway as i see my system wont have fee at least for 2 months from now. It might be extended.

I also am working on RX480 tuning which gives me 29MH/s with 170 watt from wall which is nice.

P.S - thx for writing in my thread, you are bumping my threat to the top many times

You still doesnt understand my service.
Its not free for all Ubuntu which can you use and modify.
Its my custom OS with custom scripts, i will do what i will think is good for my system.
You can tell everyday about opening system but sorry - its not that kind of system i want to have .....
If you want open system then go and do it by yourself, sory but mine wont be that...

ok i will rethink that

ok i will think about this.
so your goal is to give root password to all ?
i must think if that wont open rigs to hacking ...
i would need to block ssh connections, there are so many security issues so its not that simple