can or CANT ?

If there will be need, i can do other device which will cut off/on power to rigs.
But only if there will be demand to do that. I already have this kind of devices (it was first idea what i produced)

I have that in plans , When ready , i will everyone let know.

Did you try to apply BETA KERNEL ? - it solves most OC problems and increases speed

I wanted to rest but accually my girfriend went with her friend and i am bored
Here you have it:

UPDATE 1059:
- added IP address when hovering on "name"

Are Panda miners hanging itself ?
I assume pandaminer has normal motherboard ? or not ?
If you have Power button and Power led then propably there are those pins
Anyway  opening pandaminer could result in warranty loose ?

Please PM me to admin@simplemining.net
I can check it.

This is at the bottom of my todo list so very long or even never.
Only Claymore has api for counting speed, so it would work only and only for claymore
And also second thig why i wont do that is that you can already whatch this in pool
Also pool has alerts and detailed mining speeds of each miner.
As i dont control hash power (no proxy or other stuff) - it is very complicated to do this in my dahsboard.
Only thing i could do (what came to me 3 seconds after writing above sentence - is to get those stats from api from POOL.
That could be done and accually it is pretty good idea. I will add it but still not soon.

It was exactly what i was looking for the last 3 years but i could not find it
And i wasted so much time and mining hours for driving to hanged rigs ....
Finally OVER !

Ofcourse SimpleMining OS will have installed utility and options in web interface to manage SRR
It will be implemented  in next 2 weeks
5 min cooldown, yes. Some rigs wont turn on after problem right away and there are need to be turned off for few minutes.
This option is already programmes and its called LONG REBOOT

No problem, All windows and linux are supported !



Also:

SimpleRigResetter (SRR) pros over other solutions:
- propably cheaper when using more than 3-8 rigs. Even more cheaper it wil be with SRR + Extension Board for addonitional 24 Rigs . (then cost per rig will be about 10$ in 32 rigs enviroment)
- auto rebooting - programmed tools and scripts which will auto reboot hanged rigs VS manual clicking in PDU/APC (or scripting but someone must have skills and time)
- no power limitation like in PDU/APC which can give average max of ~3000 W - so max 3-4 rigs connected to one APC - thats becasue SRR doesnt transfer any 120/240V power.
- rigs isolation - if ther will be something with rig, rest rigs wont suffer from it via my device due to opti transistors (there is no phisical connection between rigs)
- turning ON feature which accually can tun ON rig obiously But is you dont have set "turn ON on power restore" or sometimes when you shutdown rig or simply bug in motherboard firmware - then rig wont turn ON automatically in other solutions.
In mine, SRR can read POWER LED is it ON or OFF and can Power ON and OFF rig via normal traditional "Power button behavior"
- you can check status of all rigs (is it turned ON/OFF) on one page.
- for big farms like 100+ rigs there is fewer devices to be managed. SRR+2 Extenstion boards can manage 56 rigs while other solutions can manage up to 4-10 max

From my point of view:

SimpleRigResetter (SRR) pros over other solutions:
- propably cheaper when using more than 3-8 rigs. Even more cheaper it wil be with SRR + Extension Board for addonitional 24 Rigs . (then cost per rig will be about 10$ in 32 rigs enviroment)
- auto rebooting - programmed tools and scripts which will auto reboot hanged rigs VS manual clicking in PDU/APC (or scripting but someone must have skills and time)
- no power limitation like in PDU/APC which can give average max of ~3000 W - so max 3-4 rigs connected to one APC - thats becasue SRR doesnt transfer any 120/240V power.
- rigs isolation - if ther will be something with rig, rest rigs wont suffer from it via my device due to opti transistors (there is no phisical connection between rigs)
- turning ON feature which accually can tun ON rig obiously But is you dont have set "turn ON on power restore" or sometimes when you shutdown rig or simply bug in motherboard firmware - then rig wont turn ON automatically in other solutions.
In mine, SRR can read POWER LED is it ON or OFF and can Power ON and OFF rig via normal traditional "Power button behavior"
- you can check status of all rigs (is it turned ON/OFF) on one page.
- for big farms like 100+ rigs there is fewer devices to be managed. SRR+2 Extenstion boards can manage 56 rigs while other solutions can manage up to 4-10 max

There is no limit of rigs.
My server has great performance and still it is used in like 5% of all CPU power.
There cant be limit, it would make no sense
Only limit is that showing 100+ rigs, is little hard on one page and some sorting needs to be done.
But i have this in plans ofcourse
SRR ok. Nobody forcing you to buy this It is optional device and it is separate project from Simple Mining OS.

No, only switching discs (i mean windows on ssd and my system on pendrive)

We want linux Miner, not windows one bleh...

Nope, there is no linux miner at this point. Only windows shitty one which even doesnt find blocks
Suprnova is getting pool up and running but still there is no linux miner.
Anyway mining PASCAL is 10x more profitable at this moment than ETC/ETH
Still mining solo with buggy miner its completly no point

Is accually miner from here will work?
Or do we need for forked miner ?
Meaby someone already have right miner with modded sha256 algho ?
http://ck.kolivas.org/apps/cgminer/

Glad that you are guys figuring thi out by themselves
I am currently looking at PascalCoin and waiting for linux miner for imlement, but still none

thx to text-only we can see in console
Without it console wont show details.

Only ZEC end ETH Claymore is fully compatible with new and-gpu drivers.
Rest XMR especially is not compatible with new drivers so thats why isnt working

Honestly ? As now it looks like blank page
I will be writing this in next week but it is not complicated :p
There will be instruction
- how to connect rigs to SRR
- how to install and configure SRR Agent on windows/linux
- how to use SRR Tool

Nothing complicated. Alyway there wont be Paper instruction but PDF one with as many pictures as i can