I created a "warp.conf" file here. Is it ok the way I did it?
addnode=109.235.71.102
addnode=24.48.120.173
addnode=70.83.227.32
server=0
rpcuser=user
rpcpassword=pass
rpcallowip=127.0.0.1
rpcallowip=192.168.1.*
rpcconnect=127.0.0.1
Thanks
It does not matter where you place your nodes, on beginn or at the end, good is, it is structured and not mixed. I like your config
![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
, it's the first where I see addnodes on beginn. And I am sure you use different user and pass than posted
![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
, correct?
listen=1
daemon=1
server=1
rpcport=31313
port=31312
Last time I gave a tip to a person on this forum, I was told I am arrogant. I'll try it again and hope it can help you and others.
There is nothing wrong with your config, this is just another way of writing, for some usefull, for others less usefull.
rpcallowip=192.168.1.0/24
WHAT DOES /24 or /32 MEAN???/32 is a network mask of 255.255.255.255
/24 is a network mask of 255.255.255.0
192.168.0.254/32 = ip address of 192.168.0.254
192.168.0.1/24 = range of ip's from 192.168.0.1 to 192.168.0.1.255
00000000.00000000.00000000.00000000
11111111.11111111.11111111.00000000
all number one's represent closed bit. Zero's can support 2 ip addresses per bit, the calculation is 2^N -2 where N= the number of open (0) bits, -2 because all open and all closed are not valid.
Means, in 192.168.0.0/24 valid firewall range is 192.168.0.1-192.168.0.254, in 192.168.0.1/32 the ONLY valid ip is 192.168.0.1
I am not chinese, but if somebody doesn't understand my chinese and is interested in this topic, feel free to
google for CIDR notation....
Have a nice day @all
![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)