Dexter12
|
|
January 29, 2016, 10:21:22 PM |
|
Warp added to ccex voting list lets all go vote
I don't support it. Thank you! I do not support them too.
|
|
|
|
jc12345
Legendary
Offline
Activity: 1638
Merit: 1013
|
|
January 29, 2016, 10:27:01 PM |
|
Here's my output when I attempt to build from source instead: What am I doing wrong? root@zero-Inspiron-3542:/home/zero/warp# make -f Makefile cd /home/zero/warp/src/leveldb && CC=gcc CXX=g++ make OPT="-m64 -pipe -fstack-protector-all --param ssp-buffer-size=1 -D_FORTIFY_SOURCE=2 -O2" libleveldb.a libmemenv.a /bin/sh: 1: ./build_detect_platform: Permission denied make[1]: Entering directory `/home/zero/warp/src/leveldb' Makefile:18: build_config.mk: No such file or directory make[1]: *** No rule to make target `build_config.mk'. Stop. make[1]: Leaving directory `/home/zero/warp/src/leveldb' make: *** [/home/zero/warp/src/leveldb/libleveldb.a] Error 2 cd ~/warp/src/leveldb sudo chmod 755 build_detect_platform run your make again Nice, thank you, it appears to be building now Pleasure. Source code has the incorrect permission on the file.
|
|
|
|
Indianacoin
|
|
January 29, 2016, 10:29:48 PM |
|
It is a good concept but you need to increase the bounty for free giveaways. Since it is fully POS I think it is 100% premine? Also how many deposits are needed on my wallet for the staking to start? Sometimes the wallet gets stuck while loading! Please try to fix this issue ASAP. Here's my output when I attempt to build from source instead: What am I doing wrong? root@zero-Inspiron-3542:/home/zero/warp# make -f Makefile cd /home/zero/warp/src/leveldb && CC=gcc CXX=g++ make OPT="-m64 -pipe -fstack-protector-all --param ssp-buffer-size=1 -D_FORTIFY_SOURCE=2 -O2" libleveldb.a libmemenv.a /bin/sh: 1: ./build_detect_platform: Permission denied make[1]: Entering directory `/home/zero/warp/src/leveldb' Makefile:18: build_config.mk: No such file or directory make[1]: *** No rule to make target `build_config.mk'. Stop. make[1]: Leaving directory `/home/zero/warp/src/leveldb' make: *** [/home/zero/warp/src/leveldb/libleveldb.a] Error 2 cd ~/warp/src/leveldb sudo chmod 755 build_detect_platform run your make again Nice, thank you, it appears to be building now Pleasure. Source code has the incorrect permission on the file. That is the reason why the wallet gets slowed down on starting.
|
|
|
|
jc12345
Legendary
Offline
Activity: 1638
Merit: 1013
|
|
January 29, 2016, 10:33:20 PM |
|
That is the reason why the wallet gets slowed down on starting. No, it is why he got a permission error with the compile.
|
|
|
|
jc12345
Legendary
Offline
Activity: 1638
Merit: 1013
|
|
January 29, 2016, 10:39:03 PM |
|
It is a good concept but you need to increase the bounty for free giveaways.
No. Easy come easy go. Giveaways = bad. Since it is fully POS I think it is 100% premine?
Correct. Also how many deposits are needed on my wallet for the staking to start?
there is no relationship between number of deposits and staking. The relationship is between number of coins in the wallet (input block size also matter) and the time they have been at the address without moving, as well as if the wallet is unlocked for staking. Sometimes the wallet gets stuck while loading! Please try to fix this issue ASAP.
Sounds like an error on your side. Do a normal sync from scratch. (Clean your directory except your wallet.dat and warp.conf. put the right things in the .conf and resync your chain)
|
|
|
|
galacticpilgrim
|
|
January 29, 2016, 10:45:03 PM |
|
I have just noticed when I got home from work that only 1/4 of my coins are now staking, where as this morning all of them were staking.
Any ideas why?
Thanks
|
|
|
|
jc12345
Legendary
Offline
Activity: 1638
Merit: 1013
|
|
January 29, 2016, 10:49:56 PM |
|
I have just noticed when I got home from work that only 1/4 of my coins are now staking, where as this morning all of them were staking.
Any ideas why?
Thanks
Activate coin control, go into send and select inputs. Expand the tree and see if things look normal there.
|
|
|
|
DunningKruger
Newbie
Offline
Activity: 32
Merit: 0
|
|
January 29, 2016, 10:52:08 PM Last edit: January 30, 2016, 12:42:11 AM by DunningKruger |
|
I have just noticed when I got home from work that only 1/4 of my coins are now staking, where as this morning all of them were staking.
Any ideas why?
Thanks
Is your problem also caused by the blockchain losing sync whenever the wallet starts staking, like this? http://s11.postimg.org/iampzjrvn/warp.pnghttp://s22.postimg.org/6jnfbe9ip/warp.pngedit: I had a look at the coincontrol tree, and the the coin entrance is broken into two branches of approximately the same value ... i'd expect to have a huge first branch (received coins), and smaller branches (stake coins)... but it's the first time a deal with PoS coins, so I don't know, really...
|
|
|
|
Blake Birk
|
|
January 29, 2016, 11:46:28 PM Last edit: January 30, 2016, 12:10:29 AM by Blake Birk |
|
Im selling warp at 0.001 btc each, 1700 warp available
|
|
|
|
galacticpilgrim
|
|
January 30, 2016, 12:18:27 AM |
|
I have just noticed when I got home from work that only 1/4 of my coins are now staking, where as this morning all of them were staking.
Any ideas why?
Thanks
Activate coin control, go into send and select inputs. Expand the tree and see if things look normal there. I'm not sure if I could tell if there was anything abnormal about the tree. I looked there and didn't see anything odd...
|
|
|
|
pokeytex
Legendary
Offline
Activity: 1504
Merit: 1002
|
|
January 30, 2016, 12:23:12 AM |
|
Im selling warp at 0.001 btc each, 1700 warp available
Bah - I am selling 5000 WARP @ .002 BTC each
|
|
|
|
Zebedee23
Legendary
Offline
Activity: 2086
Merit: 1001
|
|
January 30, 2016, 12:25:13 AM |
|
How about 50,000 at 0.02
|
| .Reserve. | | ▄▄▄███████▄▄▄ ▄█████████████████▄ ▄█████████████████████▄ ████████▀▀▀███▀▀▀████████ █████████ ███ █████████ ███████ ███████ ██████████ ███ ██████████ ██████████ ███ ██████████ ▀██████ ██████▀ ▀████████ ███ ████████▀ ▀███████▄▄▄███▄▄▄███████▀ ▀███████████████████▀ ▀▀█████████████▀▀ ▀▀▀▀▀▀▀ | | | | | | | .Reserve Your Rights. |
|
|
|
SISAR
|
|
January 30, 2016, 12:37:33 AM |
|
Very few people are actualy staking, I just got my first PoS block in few minutes since wallet unlock and I have less than 4,000 WARP total. Netstakeweigth is realy low as well as PoS difficulty. At http://84.200.4.70:3001/richlist top 10 addresses created only 8 PoS blocks so far! Other than that things work smoothly on my side (Win7).
|
|
|
|
DunningKruger
Newbie
Offline
Activity: 32
Merit: 0
|
|
January 30, 2016, 12:41:50 AM |
|
Very few people are actualy staking, I just got my first PoS block in few minutes since wallet unlock and I have less than 4,000 WARP total. Netstakeweigth is realy low as well as PoS difficulty. Other than that things work smoothly on my side (Win7). https://i.imgur.com/nwLruz8.pngI am still having out of sync issues, and lots of orfans, but my wallet has been always online.
|
|
|
|
l8nit3
Legendary
Offline
Activity: 1007
Merit: 1000
|
|
January 30, 2016, 12:48:49 AM |
|
Havent had a single issue here! have a very low amount of WARP (~650) and already pulled 7 blocks http://imgur.com/gallery/L31uk0G
|
|
|
|
riceberry
|
|
January 30, 2016, 12:50:26 AM |
|
Very few people are actualy staking, I just got my first PoS block in few minutes since wallet unlock and I have less than 4,000 WARP total. Netstakeweigth is realy low as well as PoS difficulty. At http://84.200.4.70:3001/richlist top 10 addresses created only 8 PoS blocks so far! Other than that things work smoothly on my side (Win7). The block explorer doesn't show all the blocks that have been staked. It's more than 8. I'm in the top 10, and I have staked 10 blocks myself so far.
|
|
|
|
SISAR
|
|
January 30, 2016, 12:50:45 AM |
|
Very few people are actualy staking, I just got my first PoS block in few minutes since wallet unlock and I have less than 4,000 WARP total. Netstakeweigth is realy low as well as PoS difficulty. Other than that things work smoothly on my side (Win7). https://i.imgur.com/nwLruz8.pngI am still having out of sync issues, and lots of orfans, but my wallet has been always online. Shutdown wallet, locate directory with wallet.dat and there delete the following: database txleveldb .lock blk0001.dat Then start wallet, let it sync and then try staking.
|
|
|
|
Abiky
Legendary
Offline
Activity: 3304
Merit: 1381
www.Crypto.Games: Multiple coins, multiple games
|
|
January 30, 2016, 12:53:14 AM |
|
Looking into Warp lately, I have became interested in its features. It has everything that makes a cryptocurrency an essential means of payment. I will be watching this thread closely for updates. As soon as Warp hits the exchanges, I will buy a stack of it. Looks very promising.
|
|
|
|
DunningKruger
Newbie
Offline
Activity: 32
Merit: 0
|
|
January 30, 2016, 01:04:26 AM |
|
Very few people are actualy staking, I just got my first PoS block in few minutes since wallet unlock and I have less than 4,000 WARP total. Netstakeweigth is realy low as well as PoS difficulty. Other than that things work smoothly on my side (Win7). https://i.imgur.com/nwLruz8.pngI am still having out of sync issues, and lots of orfans, but my wallet has been always online. Shutdown wallet, locate directory with wallet.dat and there delete the following: database txleveldb .lock blk0001.dat Then start wallet, let it sync and then try staking. Thanks, I have deleted everything inside that folder again now (of course, keeping the walled.dat safe) to see what happens. edit: it's already staking ... anyway, again, it started staking, but the moment it received coins the wallet went out of sync, end after a while, the coins were orfaned again with the wallet resync :/ it's been like this the whole day today.
|
|
|
|
Maxikosw
|
|
January 30, 2016, 01:09:09 AM |
|
Selling warp at 0.0005 btc each, 1074 warp available
|
|
|
|
|