almirfiorio
|
|
December 08, 2016, 05:53:29 PM |
|
This is something I do not understand. A video card of that consumes at most 130w. Two are 260w. So why does not a 500w source support it? If I have to buy source I'll buy soon 1000 or 1200w. Because I'm going to use 6 plates soon. Which modular font do you recommend in this range? Thanks Almir Now if you go at the link that you provided, you will see that for a single GPU it's recommended a 500 W PSU. Normally a Radeon Rx 470 should need ~ 150 W maximum. So for 2 x GPU you need ~300 W maximum. CPU 50W. Do you have something elso that uses power? Because I had the same issue and the problem was PSU.
|
|
|
|
almirfiorio
|
|
December 08, 2016, 06:16:39 PM Last edit: December 08, 2016, 06:32:53 PM by almirfiorio |
|
Okay, but the psu that is weak or is it in trouble? USB riser cables consume less power than the directly connected card in the 16x PCI express slot? My bet would be the PSU
|
|
|
|
BogdanCo
|
|
December 08, 2016, 07:24:33 PM |
|
This is something I do not understand. A video card of that consumes at most 130w. Two are 260w. So why does not a 500w source support it? If I have to buy source I'll buy soon 1000 or 1200w. Because I'm going to use 6 plates soon. Which modular font do you recommend in this range? Thanks Almir Now if you go at the link that you provided, you will see that for a single GPU it's recommended a 500 W PSU. Normally a Radeon Rx 470 should need ~ 150 W maximum. So for 2 x GPU you need ~300 W maximum. CPU 50W. Do you have something elso that uses power? Because I had the same issue and the problem was PSU. It consumes ~150W at peaks, google it and you will see. Do you have something else that consumes power? HDD? External HDD? CD ROM? Fans? etc.... Do you have a link for your PSU so I can see it? A good PSU which I recommend for a rig with 6 x Rx http://www.corsair.com/en/ax1200i-digital-atx-power-supply-1200-watt-80-plus-platinum-certified-fully-modular-psu-eu
|
|
|
|
S.N.U.F.F.
Newbie
Offline
Activity: 34
Merit: 0
|
|
December 08, 2016, 07:26:06 PM |
|
Guys, what mean "incorrectly calculated shares" in solo(not pool) mining. Looks like ( 0/0/1(0.00%)) in EthMan stats. I'm mining solo almost a week already. First few days all was good 2-3 blocks per day. 3 last days was very unlack. I still got same 2-3 shares but almost all of them is looks like 0/0/1 ("incorrectly calculated shares" as says EthMan help) Is this type of shares is normal situation, and I just have bad luck, or it is may be some hardware errors, or maybe some software(geth) issue?
|
|
|
|
MinerosYV
Newbie
Offline
Activity: 72
Merit: 0
|
|
December 08, 2016, 07:36:23 PM |
|
This is something I do not understand. A video card of that consumes at most 130w. Two are 260w. So why does not a 500w source support it? If I have to buy source I'll buy soon 1000 or 1200w. Because I'm going to use 6 plates soon. Which modular font do you recommend in this range? Thanks Almir Now if you go at the link that you provided, you will see that for a single GPU it's recommended a 500 W PSU. Normally a Radeon Rx 470 should need ~ 150 W maximum. So for 2 x GPU you need ~300 W maximum. CPU 50W. Do you have something elso that uses power? Because I had the same issue and the problem was PSU. I got 6 R9 390 running on a rig, they have 2 x 1300 watts.
|
|
|
|
almirfiorio
|
|
December 08, 2016, 07:47:19 PM |
|
Dear Friend My PSU is a corsair 500w Im have only motherboard, two units of rx470 , hd ssd , one fan of 120mm, Keyboard, mouse and monitor ***** ( im no have cd rom ) Thanks Almir
|
|
|
|
|
MinerosYV
Newbie
Offline
Activity: 72
Merit: 0
|
|
December 08, 2016, 10:45:52 PM |
|
I'm having an issue with port 4444, it does not matter what I do it will not connect to port 4444, easy enough , change to port 14444, it works but as soon as the Dev Fees kick in they will try US1.ethermine.org:4444, they will fail to connect and restart Claymore all over again. Is there any ways to change that? Could I have the Dev Fees go to another pool, on the smaller CPUs it does it, goes to ethpool or the other one, its driving me crazy. I guess The rig looses some 30 min per day doing that.
Thanks
|
|
|
|
almirfiorio
|
|
December 09, 2016, 01:12:40 AM |
|
Dear Friend Can not be the PSU. I have here a second pcu in my house. And I PUT up a second PSU and plugged. im put only the 2nd video card in this 2nd PSU. The pc normally connected and recognized the two video cards And when starting the claymore's the pc shutdown again Thanks Almir
|
|
|
|
MinerosYV
Newbie
Offline
Activity: 72
Merit: 0
|
|
December 09, 2016, 01:47:39 AM |
|
Dear Friend Can not be the PSU. I have here a second pcu in my house. And I PUT up a second PSU and plugged. im put only the 2nd video card in this 2nd PSU. The pc normally connected and recognized the two video cards And when starting the claymore's the pc shutdown again Thanks Almir
|
|
|
|
almirfiorio
|
|
December 09, 2016, 02:14:42 AM |
|
no gpu is not overheating, thew teperature of gpu is only 34o in the sapphire trixx the clock is 1250x1716 (default) see the picture https://s29.postimg.org/kxpxtuyx3/trix_JPG.jpgthis bellow is the last lines and the line presentes in log 21:57:51:449 97c Setting DAG epoch #92... 21:57:53:574 13f0 Unsupported Overdrive version 7 21:57:53:574 13f0 Unsupported Overdrive version 7 21:57:53:699 38c Setting DAG epoch #92 for GPU #0 21:57:53:699 38c Create GPU buffer for GPU #0 21:57:53:699 97c Setting DAG epoch #92 for GPU #1 21:57:53:714 97c Create GPU buffer for GPU #1 21:57:56:606 13f0 Unsupported Overdrive version 7 21:57:56:606 13f0 Unsupported Overdrive version 7 Show less
|
|
|
|
MinerosYV
Newbie
Offline
Activity: 72
Merit: 0
|
|
December 09, 2016, 03:33:01 AM |
|
I'm having an issue with port 4444, it does not matter what I do it will not connect to port 4444, easy enough , change to port 14444, it works but as soon as the Dev Fees kick in they will try US1.ethermine.org:4444, they will fail to connect and restart Claymore all over again. Is there any ways to change that? Could I have the Dev Fees go to another pool, on the smaller CPUs it does it, goes to ethpool or the other one, its driving me crazy. I guess The rig looses some 30 min per day doing that.
Thanks
Well I did figure it out, the one having a problem with the Port 4444 is my internet provider, did try with another service and go figures it works just fine. Will have to talk to those guys
|
|
|
|
m1n1ngP4d4w4n
Full Member
Offline
Activity: 224
Merit: 100
CryptoLearner
|
|
December 09, 2016, 06:18:01 AM Last edit: December 09, 2016, 06:29:32 AM by m1n1ngP4d4w4n |
|
no gpu is not overheating, thew teperature of gpu is only 34o in the sapphire trixx the clock is 1250x1716 (default) see the picture https://s29.postimg.org/kxpxtuyx3/trix_JPG.jpgthis bellow is the last lines and the line presentes in log 21:57:51:449 97c Setting DAG epoch #92... 21:57:53:574 13f0 Unsupported Overdrive version 7 21:57:53:574 13f0 Unsupported Overdrive version 7 21:57:53:699 38c Setting DAG epoch #92 for GPU #0 21:57:53:699 38c Create GPU buffer for GPU #0 21:57:53:699 97c Setting DAG epoch #92 for GPU #1 21:57:53:714 97c Create GPU buffer for GPU #1 21:57:56:606 13f0 Unsupported Overdrive version 7 21:57:56:606 13f0 Unsupported Overdrive version 7 Show less Are you using the recommended catalyst 15.12 ? Because overdrive is AMD auto-clock / fan management so if claymore use the one present on your system it may be too old or too recent to be claymore compatible. what command do you use to launch claymore ? Any gpu oc or temp managment in the cmdline ? You should try to completely replace current PSU with the spare one you tested before to check if main PSU isn't in trouble Try also with only 1x GPU to see if the stability is better
|
|
|
|
almirfiorio
|
|
December 09, 2016, 10:20:34 AM |
|
Friend This is my line of claymore version 5.3 beta EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x4FAd3e68CEc96AfbB0457B17A46fF6896EB57E40.worker1 -epsw x -ethi 16 -etha 0 -esm 1 in bios my am3 is auto clock im dont have catalyst im have instaled the crimsom 16.11.4 beta im need to change? Thanks Almir no gpu is not overheating, thew teperature of gpu is only 34o in the sapphire trixx the clock is 1250x1716 (default) see the picture https://s29.postimg.org/kxpxtuyx3/trix_JPG.jpgthis bellow is the last lines and the line presentes in log 21:57:51:449 97c Setting DAG epoch #92... 21:57:53:574 13f0 Unsupported Overdrive version 7 21:57:53:574 13f0 Unsupported Overdrive version 7 21:57:53:699 38c Setting DAG epoch #92 for GPU #0 21:57:53:699 38c Create GPU buffer for GPU #0 21:57:53:699 97c Setting DAG epoch #92 for GPU #1 21:57:53:714 97c Create GPU buffer for GPU #1 21:57:56:606 13f0 Unsupported Overdrive version 7 21:57:56:606 13f0 Unsupported Overdrive version 7 Show less Are you using the recommended catalyst 15.12 ? Because overdrive is AMD auto-clock / fan management so if claymore use the one present on your system it may be too old or too recent to be claymore compatible. what command do you use to launch claymore ? Any gpu oc or temp managment in the cmdline ? You should try to completely replace current PSU with the spare one you tested before to check if main PSU isn't in trouble Try also with only 1x GPU to see if the stability is better
|
|
|
|
m1n1ngP4d4w4n
Full Member
Offline
Activity: 224
Merit: 100
CryptoLearner
|
|
December 09, 2016, 10:37:04 AM |
|
Yes use the recommended drivers i don't use AMD rig, but i presume it's mandatory also remove -ethi 16 and let the default be, you are doubling the default intensity, it's probably why it's not going good. so remove -ethi completly and let it default for now. you probably want to test this before even changing the drivers. Cheers
|
|
|
|
almirfiorio
|
|
December 09, 2016, 10:40:42 AM Last edit: December 09, 2016, 12:27:12 PM by almirfiorio |
|
my drivers are corect ?: remove only "-ethi 16" ? then the line is EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x4FAd3e68CEc96AfbB0457B17A46fF6896EB57E40.worker1 -epsw x -etha 0 -esm 1 Is it not a problem with windows 10? because the drivers have many problems Thanks Almir Yes use the recommended drivers i don't use AMD rig, but i presume it's mandatory also remove -ethi 16 and let the default be, you are doubling the default intensity, it's probably why it's not going good. so remove -ethi completly and let it default for now. you probably want to test this before even changing the drivers. Cheers
|
|
|
|
m1n1ngP4d4w4n
Full Member
Offline
Activity: 224
Merit: 100
CryptoLearner
|
|
December 09, 2016, 02:16:24 PM |
|
my drivers are corect ?: remove only "-ethi 16" ? then the line is EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x4FAd3e68CEc96AfbB0457B17A46fF6896EB57E40.worker1 -epsw x -etha 0 -esm 1 Is it not a problem with windows 10? because the drivers have many problems Thanks Almir Yes use the recommended drivers i don't use AMD rig, but i presume it's mandatory also remove -ethi 16 and let the default be, you are doubling the default intensity, it's probably why it's not going good. so remove -ethi completly and let it default for now. you probably want to test this before even changing the drivers. Cheers Does it run better without the -ethi 16 ?
|
|
|
|
avirdoz
Legendary
Offline
Activity: 1191
Merit: 1001
|
|
December 09, 2016, 06:12:38 PM |
|
Would be nice if you will add ability to use environment variables in "epools.txt" and "config.txt" files, like in zcash miner.
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
December 09, 2016, 06:14:49 PM |
|
Would be nice if you will add ability to use environment variables in "epools.txt" and "config.txt" files, like in zcash miner.
Ok I will release an update soon.
|
|
|
|
m1n1ngP4d4w4n
Full Member
Offline
Activity: 224
Merit: 100
CryptoLearner
|
|
December 09, 2016, 09:31:36 PM |
|
Hey Claymore, Would be nice to have the ability to protect the admin port for the remote console of claymore by adding maybe "-mkey yourpassword" ? and/or able to make the remote console listen on different port in different mode (-mport 3333 -4444) so that you could expose monitoring on the internet for remote administration/monitoring purpose. I know both request it would require you to change also the code for ethman, but it would be a great feature keep up the good work cheers.
|
|
|
|
|