Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[matmator]

Regarded the problems you report me about my script, you must excuse me but since it is a private tool, has never been tested in other PCs with different software and operating systems.

I'm using it on win10 and win 8.1 both 64bit. My Powershell version is 5.0 and i don't know if it can work on other version.

The file was saved by mistake in linux format (which has a different end of line than windows). Now you can edit it with notepad too but highly recommend using notepad++ (but never use a word processor)

Profitability is checked using whattomine data and based on the profit ratio. On rare occasions, two values may coincide and in this case will be "chosen" the money that is first in the list.

Any other suggestion is welcome so I can improve my little tool.
Obviously, if someone wants, can also improve it by himself and share with everyone.

Version 0.6.1 with fixed file format is online
https://mega.nz/#F!WlFFUKrB!eX13s95kB9qhrGhFiAH_pA

Thanks to all
crpt01

Not bad your script! good work !

But it would be nice if the script automatically hides the hash power.

[crpt01]

Not bad your script! good work !

But it would be nice if the script automatically hides the hash power.

thank you very much !
it's very usefull for me. All the information I need in a compact form without the need to open other programs!

If u want to hide hash power from output screen simply add a "rem " at the beginning of each rows from 55 to 63 

[Benkoo]

I mining two days ago with stock 3x MSI RX 480 8G. With - dcri 40 I had 70mh ETC and 1400mh PASC. But yesterday when i try to mine my PC slowed down, browser freeze and wifi doesn't worked. What's wrong? PSU XFX 1000w Platinum, cards underclocked.

[marvykkio]

@claymore and can more speed for eth? or we arrived at its power limit on RX series?

[deadsix]

@claymore and can more speed for eth? or we arrived at its power limit on RX series?

There was a thread where miner makes were discussing how they code their algos, several of the popular names contributed, it was pretty informative.
They were discussing all altcoin algos, and if I remember, it was generally agreed that they had optimized the Ethash algo as much as they could.

[escapefrom3dom]

I mining two days ago with stock 3x MSI RX 480 8G. With - dcri 40 I had 70mh ETC and 1400mh PASC. But yesterday when i try to mine my PC slowed down, browser freeze and wifi doesn't worked. What's wrong? PSU XFX 1000w Platinum, cards underclocked.

try to run system just with one card and make such check for every card.

[Marvell1]

any idea when this will work for pascal cards like 1070 ? i have a few of those as replacements from MSI and i would like to have then dual mine pascal as well

[fittsy]

Thank you for a suggestion, I tried it ;] set -dcri 50, upped to 60 soon after, achieved ~1400 Mh/s for decred, but Eth went down to ~47-51Mh/s with 25W more for 2 RX 480.

What is your setup and numbers with and without second coin mining? If you would -,-

I'm not dual mining at the moment but I was running 144 mh ETH / 5700 mh DCR. (6x rx 480) Don't remember the different watts but according to what to mine that was the sweet spot for me. Of course this was before ETH hit an all time high. I'm sure whattomine would say solo mining ETH is best right now.

[uninexus]

Thank you for a suggestion, I tried it ;] set -dcri 50, upped to 60 soon after, achieved ~1400 Mh/s for decred, but Eth went down to ~47-51Mh/s with 25W more for 2 RX 480.

What is your setup and numbers with and without second coin mining? If you would -,-

I'm not dual mining at the moment but I was running 144 mh ETH / 5700 mh DCR. (6x rx 480) Don't remember the different watts but according to what to mine that was the sweet spot for me. Of course this was before ETH hit an all time high. I'm sure whattomine would say solo mining ETH is best right now.

I find that about 30% intensity on DCR is just about maximum before ETH rate is reduced. I think dual mining is still slightly more profitable.

Just my $0.02

[icallpurps]

If you're running AMD then eth+x is the way to go. If your nvidia then zcash is what I've noticed to be most profitable

[gOCe]

Could you please add Nicehash-Cryptonight and Nicehash-eth to the displayed revenues.
Thanks in advance

Regarded the problems you report me about my script, you must excuse me but since it is a private tool, has never been tested in other PCs with different software and operating systems.

I'm using it on win10 and win 8.1 both 64bit. My Powershell version is 5.0 and i don't know if it can work on other version.

The file was saved by mistake in linux format (which has a different end of line than windows). Now you can edit it with notepad too but highly recommend using notepad++ (but never use a word processor)

Profitability is checked using whattomine data and based on the profit ratio. On rare occasions, two values may coincide and in this case will be "chosen" the money that is first in the list.

Any other suggestion is welcome so I can improve my little tool.
Obviously, if someone wants, can also improve it by himself and share with everyone.

Version 0.6.1 with fixed file format is online
https://mega.nz/#F!WlFFUKrB!eX13s95kB9qhrGhFiAH_pA

Thanks to all
crpt01

[EastSound]

If you're running AMD then eth+x is the way to go. If your nvidia then zcash is what I've noticed to be most profitable

The dual mining is killing the PASC.

[ofpcarnage]

Guys / Gals

I need some advice.
All of a sudden my most stable rig is no longer stable.
One of my GPU's (RX 480)keeps dropping to 0.00 Mh/s sometimes it wont even start hashing when I start the mining software.
It was perfectly fine yesterday.
I have tried to re-install the driver to see if this was the cause.
I even selected -di 4 and ran it on its own.....when running on its own it runs perfect. But as soon as I try to run a full rig the card fails.

My PSU is a EVGA G2 1600W so that is more than enough power to run 7 cards.

I have the exact same set up on another rig and that runs fine.

[BenCodie]

Guys / Gals

I need some advice.
All of a sudden my most stable rig is no longer stable.
One of my GPU's (RX 480)keeps dropping to 0.00 Mh/s sometimes it wont even start hashing when I start the mining software.
It was perfectly fine yesterday.
I have tried to re-install the driver to see if this was the cause.
I even selected -di 4 and ran it on its own.....when running on its own it runs perfect. But as soon as I try to run a full rig the card fails.

My PSU is a EVGA G2 1600W so that is more than enough power to run 7 cards.

I have the exact same set up on another rig and that runs fine.

No Gals lol
All Guys here 

[Benchman]

Guys / Gals

I need some advice.
All of a sudden my most stable rig is no longer stable.
One of my GPU's (RX 480)keeps dropping to 0.00 Mh/s sometimes it wont even start hashing when I start the mining software.
It was perfectly fine yesterday.
I have tried to re-install the driver to see if this was the cause.
I even selected -di 4 and ran it on its own.....when running on its own it runs perfect. But as soon as I try to run a full rig the card fails.

My PSU is a EVGA G2 1600W so that is more than enough power to run 7 cards.

I have the exact same set up on another rig and that runs fine.

Gremlins,

Check Risers & Molex cables, then try to switch risers between the cards. Also, if you have 2 or 3 powered risers on the same molex wire, check whole cable.

Also, try GPU 1+2, then GPU 1+2+3, etc... until you solve problem.

Also i tried to exchange places of gpu-s and for me worked.

[matmator]

Guys / Gals

I need some advice.
All of a sudden my most stable rig is no longer stable.
One of my GPU's (RX 480)keeps dropping to 0.00 Mh/s sometimes it wont even start hashing when I start the mining software.
It was perfectly fine yesterday.
I have tried to re-install the driver to see if this was the cause.
I even selected -di 4 and ran it on its own.....when running on its own it runs perfect. But as soon as I try to run a full rig the card fails.

My PSU is a EVGA G2 1600W so that is more than enough power to run 7 cards.

I have the exact same set up on another rig and that runs fine.

You may have a failing card.

Bios mod?

[Arek]

Guys / Gals

I need some advice.
All of a sudden my most stable rig is no longer stable.
One of my GPU's (RX 480)keeps dropping to 0.00 Mh/s sometimes it wont even start hashing when I start the mining software.
It was perfectly fine yesterday.
I have tried to re-install the driver to see if this was the cause.
I even selected -di 4 and ran it on its own.....when running on its own it runs perfect. But as soon as I try to run a full rig the card fails.

My PSU is a EVGA G2 1600W so that is more than enough power to run 7 cards.

I have the exact same set up on another rig and that runs fine.

I had same issue and it was caused by 'damaged' card. I ran furmark on it and it was freezing/crashing system so I replaced it.

[ofpcarnage]

Guys / Gals

I need some advice.
All of a sudden my most stable rig is no longer stable.
One of my GPU's (RX 480)keeps dropping to 0.00 Mh/s sometimes it wont even start hashing when I start the mining software.
It was perfectly fine yesterday.
I have tried to re-install the driver to see if this was the cause.
I even selected -di 4 and ran it on its own.....when running on its own it runs perfect. But as soon as I try to run a full rig the card fails.

My PSU is a EVGA G2 1600W so that is more than enough power to run 7 cards.

I have the exact same set up on another rig and that runs fine.

I had same issue and it was caused by 'damaged' card. I ran furmark on it and it was freezing/crashing system so I replaced it.

Thanks for the input guys.

Well I'm stumped.
I decided to swap my risers around. So I chose a card from the same rig that I knew was running stable since it was only 1 card that was giving me issues.
I swapped the risers between the two cards. My thinking being if its the riser then the "good" card would then start acting up.
But now all cards are running fine?
Granted its only been 17 mins uptime. But before the "bad" card would fail after 4-5 mins .
I'm going to leave it to run for a while and see what happens but at the moment I'm thinking maybe a dodgy riser?
If it runs stable for a few more hours then I'm going to order a few more risers just in case this happens again.

[mettalmag]

Recently I came up with a strange thing when my rx480 8g cards were mining on different hashrates, I'm using 29Mhs rom since September and till this time everything was fine, but now couple 480s are mining at strange hasrates from 7-12 from 20-24. I tried almost every solution I could find on internet. The last thing was changing the bios back to original and 90% of cards are mining now at 24Mhs without any issues, but when I get back to 29Mhs bios they start jumping around again. I'm out of options what more to try, any suggestions ?

[ofpcarnage]

Recently I came up with a strange thing when my rx480 8g cards were mining on different hashrates, I'm using 29Mhs rom since September and till this time everything was fine, but now couple 480s are mining at strange hasrates from 7-12 from 20-24. I tried almost every solution I could find on internet. The last thing was changing the bios back to original and 90% of cards are mining now at 24Mhs without any issues, but when I get back to 29Mhs bios they start jumping around again. I'm out of options what more to try, any suggestions ?

Check risers?
Try down clocking a little more. for example instead of using 1150/2150  try 1125/2115
I did this for a few of my cards and it did the trick infact some are @ 1100/2000 but still hashing at 29Mh/s all with the same bios