Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[AzzAz]

try lower intensity -ethi with this command, make it -ethi 6 and then start lowering until you find the perfect spot.
On some of my rigs this settings helped, on some other ones I reverted to stock bios

Tried every permutation from -ethi 0 to -ethi 8 I still get that message :GPU #0 got incorrect share. If you see this warning often, make sure you did not overclock it too much!

Mining using Nicehash miner gui, eth using claymore miner 8.0

card is at stock setting still the same. I am so lost.

while all my cards are modded returning to factory rom solves 99.9% of problems so I'm out of options what to advise 


only one rig out of 81 isn't showing the temps, I'm confused. All the rigs are exactly same built wit same cards but only one refuses to show temps, any ideas why ?

Driver not recognize card/s correctly?

[mettalmag]

try lower intensity -ethi with this command, make it -ethi 6 and then start lowering until you find the perfect spot.
On some of my rigs this settings helped, on some other ones I reverted to stock bios

Tried every permutation from -ethi 0 to -ethi 8 I still get that message :GPU #0 got incorrect share. If you see this warning often, make sure you did not overclock it too much!

Mining using Nicehash miner gui, eth using claymore miner 8.0

card is at stock setting still the same. I am so lost.

while all my cards are modded returning to factory rom solves 99.9% of problems so I'm out of options what to advise 


only one rig out of 81 isn't showing the temps, I'm confused. All the rigs are exactly same built wit same cards but only one refuses to show temps, any ideas why ?

Driver not recognize card/s correctly?

There was 2 gigabyte RX480 and 1 Sapphire RX480, I replaced one gigabyte from another rig to be all identical cards and reinstalled drivers, I even tried older versions of miners but without any lack.
Now I came up with one idea which will help me identify the problem more detailed, I will try the Zec miner, if it still won't show the temps it means it's not about the miner but the system itself, if Zec miner will show temps then I have no idea what to do..

[ofpcarnage]

I'm trying to make a batch file so I can mine ETH + DCR
I want to use ethermine.org For Eth and Suprnova for DCR

I know I'm doing something wrong here because the ETH : Job timeout, disconnect, retry in 20 sec....   keeps popping up

Here's my current batch file that isn't working.

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxc.Worker05 -epsw x -etha 0  -esm 3 -dpool dcr.suprnova.cc:2252 -dwal xxxxxxxxx.worker05 -dpsw x -allpools 1 -allcoins -1 -r 1 -ttli 69 -tstop 72

[mettalmag]

I'm trying to make a batch file so I can mine ETH + DCR
I want to use ethermine.org For Eth and Suprnova for DCR

I know I'm doing something wrong here because the ETH : Job timeout, disconnect, retry in 20 sec....   keeps popping up

Here's my current batch file that isn't working.

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxc.Worker05 -epsw x -etha 0  -esm 3 -dpool dcr.suprnova.cc:2252 -dwal xxxxxxxxx.worker05 -dpsw x -allpools 1 -allcoins -1 -r 1 -ttli 69 -tstop 72

is this a proper way to add worker name to eth?
I'm using -eworker command separately

[ofpcarnage]

I'm trying to make a batch file so I can mine ETH + DCR
I want to use ethermine.org For Eth and Suprnova for DCR

I know I'm doing something wrong here because the ETH : Job timeout, disconnect, retry in 20 sec....   keeps popping up

Here's my current batch file that isn't working.

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxc.Worker05 -epsw x -etha 0  -esm 3 -dpool dcr.suprnova.cc:2252 -dwal xxxxxxxxx.worker05 -dpsw x -allpools 1 -allcoins -1 -r 1 -ttli 69 -tstop 72

is this a proper way to add worker name to eth?
I'm using -eworker command separately

Its ok I sorted it I was using -esm 3 instead of the default -esm 0

[ofpcarnage]

Whats the best intensity to mine decred at ?
Default value is 30?

[noviceminer]

Driver not recognize card/s correctly?

Drivers do recognize my card but as you can see the error message is still there GPU #0 got incorrect share. If you see this warning often, make sure you did not overclock it too much!

[fittsy]

Whats the best intensity to mine decred at ?
Default value is 30?

Some people prefer smaller like 15-20.  Some prefer larger like me.

You can use + and - keys while your miner is dual mining to change dcri on the fly. That way you can test for yourself and see which is best for you.  Also some cards / bios will handle it differently.  I just flashed some cards so I might not set the -dcri as high now as I did with stock bios.

[Dowper]

Whats the best intensity to mine decred at ?
Default value is 30?

I use 33 for Polaris.

[rawbot]

If your miner is built with quality, brand new parts and configured quite well, how long should I expect it to run continuously without issues?  It's been running three weeks now and I want this to continue. Less hassle.

[thespycry]

Guys, While mining ethereum, 1 think i do not understand:

I have a Sapphire RX 480 nitro oc+ 1342 MHz.
With original bios, I get about 24.5 MH/s. With timings bios, i get about 28.1 MH/s.
Wenn ich change the mem frequence from 2000 to 2200 MHz, there is no change.. although some guys in forum were getting more than 30+ MH/s.
Any idea why ?

Thank you very much

[Dowper]

Guys, While mining ethereum, 1 think i do not understand:

I have a Sapphire RX 480 nitro oc+ 1342 MHz.
With original bios, I get about 24.5 MH/s. With timings bios, i get about 28.1 MH/s.
Wenn ich change the mem frequence from 2000 to 2200 MHz, there is no change.. although some guys in forum were getting more than 30+ MH/s.
Any idea why ?

Thank you very much

My RX480 gets 30,3MH - 1140/2190 900mV.

[scryptr]

If your miner is built with quality, brand new parts and configured quite well, how long should I expect it to run continuously without issues?  It's been running three weeks now and I want this to continue. Less hassle.

YOUR RIG IS WELL BALANCED--

As long as new software updates are bug free, it should be the same.  Problems could occur from external sources, like power fluctuations or outages, and Internet stability. Power Supplies can degrade if utilized at a high load, and dust can cause friction and shorts.  Poor quality fans on some GPU cards will wear out.      

 --scryptr

[golden0707]

Guys, While mining ethereum, 1 think i do not understand:

I have a Sapphire RX 480 nitro oc+ 1342 MHz.
With original bios, I get about 24.5 MH/s. With timings bios, i get about 28.1 MH/s.
Wenn ich change the mem frequence from 2000 to 2200 MHz, there is no change.. although some guys in forum were getting more than 30+ MH/s.
Any idea why ?

Thank you very much

Thats koz your timing for 2 Ghz and 2.2Ghz are the same, yes , there is diff in speed, but by only freq.  its not noticed. In timing bios environment timings are rulers.

[doktor83]

Claymore, how can i mine ubiq with 2gb cards, because when devfee mining starts DAG cannot be created so miner restarts after a few tries... ?

[fittsy]

Claymore, how can i mine ubiq with 2gb cards, because when devfee mining starts DAG cannot be created so miner restarts after a few tries... ?

You need to mine with the -nofee option (see first post in this thread for more info.)

[fr4nkthetank]

Guys, While mining ethereum, 1 think i do not understand:

I have a Sapphire RX 480 nitro oc+ 1342 MHz.
With original bios, I get about 24.5 MH/s. With timings bios, i get about 28.1 MH/s.
Wenn ich change the mem frequence from 2000 to 2200 MHz, there is no change.. although some guys in forum were getting more than 30+ MH/s.
Any idea why ?

Thank you very much

change memory clock, then restart the computer.  It will work after.

[marvykkio]

claymore, we need integration nvidia version 8, to undermine eth + pascal with my gtx 1070, and can be integrated?

 

[doktor83]

Claymore, how can i mine ubiq with 2gb cards, because when devfee mining starts DAG cannot be created so miner restarts after a few tries... ?

You need to mine with the -nofee option (see first post in this thread for more info.)

yeah figured it out, but thanks

[BenCodie]

Kindly share your speeds on Sapphire HD 7990 on eth only