⚡[ANN]⚡ ▐░Espers [ESP]░▌▐░PoW/PoS░▌▐░HMQ1725 Algo░▌ ▐░New Features░▌

[mineru]

Hmm.. still stuck at block 5.. any bootstraps perhaps? I tried the node list down to only 1 connection now, all others misbehaving

https://muex.io/Bootstrap

[1715471986]

1715471986

[VersiJinx]

Hmm.. still stuck at block 5.. any bootstraps perhaps? I tried the node list down to only 1 connection now, all others misbehaving

https://muex.io/Bootstrap

Already have that applied, still nada. "29 weeks behind" and i cleared my old wallet completely. Hate to be a bother here just trying to get my hands on some esp.

[mineru]

Any fresh addnodes?? my clients been trying to sync for a while with no luck, would really like to get moving on this coin

Also, at the moment stuck syncing with last block as sept 2016  #5

Did you remember to delete the conf file and let the new client create a new one?

[CjMapope]

Hmm.. still stuck at block 5.. any bootstraps perhaps? I tried the node list down to only 1 connection now, all others misbehaving

https://muex.io/Bootstrap

Already have that applied, still nada. "29 weeks behind" and i cleared my old wallet completely. Hate to be a bother here just trying to get my hands on some esp.

ya i have same problem, the bootstrap is useless, as are posting nodes, as that has nothing to do with the problem (the conf creates ITSELF, and therefore good nodes are hardcoded)

theres an error in the debug logs that seems to be preventing us from receiving the blocks :/ (see my previous post)

[VersiJinx]

Hmm.. still stuck at block 5.. any bootstraps perhaps? I tried the node list down to only 1 connection now, all others misbehaving

https://muex.io/Bootstrap

Already have that applied, still nada. "29 weeks behind" and i cleared my old wallet completely. Hate to be a bother here just trying to get my hands on some esp.

ya i have same problem, the bootstrap is useless, as are posting nodes, as that has nothing to do with the problem (the conf creates ITSELF, and therefore good nodes are hardcoded)

theres an error in the debug logs that seems to be preventing us from receiving the blocks :/ (see my previous post)

Got it... yea i deleted config.. guess i have to wait the 12 days.

[CjMapope]

Hmm.. still stuck at block 5.. any bootstraps perhaps? I tried the node list down to only 1 connection now, all others misbehaving

https://muex.io/Bootstrap

Already have that applied, still nada. "29 weeks behind" and i cleared my old wallet completely. Hate to be a bother here just trying to get my hands on some esp.

ya i have same problem, the bootstrap is useless, as are posting nodes, as that has nothing to do with the problem (the conf creates ITSELF, and therefore good nodes are hardcoded)

theres an error in the debug logs that seems to be preventing us from receiving the blocks :/ (see my previous post)

Got it... yea i deleted config.. guess i have to wait the 12 days.

nah, between Cryptocoderz and this community, i bet we can figure it out before the 12 days. some people are fine so it may be something to do with our personal environments? :/
i am resyncing and trying with just one node, many nodes (30+), reindexing, everything i can think of ;p

[mineru]

Hmm.. still stuck at block 5.. any bootstraps perhaps? I tried the node list down to only 1 connection now, all others misbehaving

https://muex.io/Bootstrap

Already have that applied, still nada. "29 weeks behind" and i cleared my old wallet completely. Hate to be a bother here just trying to get my hands on some esp.

ya i have same problem, the bootstrap is useless, as are posting nodes, as that has nothing to do with the problem (the conf creates ITSELF, and therefore good nodes are hardcoded)

theres an error in the debug logs that seems to be preventing us from receiving the blocks :/ (see my previous post)

Yeah! You are on the right track. The conf creates itself and nodes are hardcoded, however, Coderz reccomended to delete the file before running. Just sticking to official instructions.
Also, some people had success with that same bootstrap. Pitty not working for some of you.
Your suspicion about the specific setup of each one of us probably screwing up could be right.

[RJX]

Yeah! You are on the right track. The conf creates itself and nodes are hardcoded, however, Coderz reccomended to delete the file before running. Just sticking to official instructions.
Also, some people had success with that same bootstrap. Pitty not working for some of you.
Your suspicion about the specific setup of each one of us probably screwing up could be right.

The bootstrap worked for me with patch 6 and it takes about 10 hours to import the blocks. Well it took about 10 hoursw for me.

I've had these nodes in conf (which I did not delete), they come from conf, Belgianboy and Nova:

Code:

addnode=199.26.184.214:22448
addnode=104.236.150.155:22448
addnode=159.203.24.196:22448
addnode=46.101.188.194:22448
addnode=173.18.196.253:22448
addnode=208.68.36.6:22448
addnode=146.185.153.196:22448
addnode=188.166.155.131:22448
addnode=107.170.212.222:22448
addnode=159.203.12.73:22448
addnode=217.175.119.126:22448
addnode=104.236.150.155:22448
addnode=144.76.237.39:22448
addnode=198.245.50.213:22448
addnode=85.255.7.224:22448
addnode=5.157.115.132:22448
addnode=24.228.192.97:22448
addnode=31.223.137.126:22448
addnode=46.101.188.194:22448
addnode=85.145.32.75:22448
addnode=91.121.77.74:22448
addnode=104.236.150.155:22448
addnode=104.237.0.79:22448
addnode=107.170.212.222:22448
addnode=120.24.217.96:22448
addnode=144.76.237.39:22448
addnode=146.185.153.196:22448
addnode=159.203.12.73:22448
addnode=159.203.24.196:22448
addnode=173.18.196.253:22448
addnode=188.68.49.137:22448
addnode=188.166.155.131:22448
addnode=199.26.184.214:22448
addnode=208.68.36.6:22448
addnode=217.175.119.126:22448

After it synced I updated to the version that CryptoCoderz released yesterday and it still works. Although: I got 1 stake on 31st.

So there

[AltScope]

just updated to latest version and seems to be syncing fine  only 2 connections atm but i shoud be able to leave it runnning all day.
I didn't need to delete my conf

are there known forks at this point?

[Hangterisaan]

ROFL! Mining solo at last!

Seems the 295's were chewing blocks too fast! Had to have guessed it before, damn.
Tested with a 280x and worked. Now mining with a 290x. Quite a lot of rejects but getting a block each 4 minutes or so. Try!

Mining not working for me. I mine over 10 Mh/s and get a block every 3 to 4 minutes but then after a few confirms they dissappear from my wallet. They do not even show in the debug console under listtransactions as an orphan or reject. Any suggestions?

EDIT: I allready installed new client and deleted all but the conf and wallet.dat and resynced.

[VersiJinx]

Eureka! I downgraded to 8.5.4 and i'm syncing past block 5 now and connected, will see how far this takes me before i upgrade back up to current. I'll update on my progress

[Noojna]

Staking does not work for me.

I have 26 millions ESP, when staking was working I used to earn at every hour or so, and since yesterday not one block...

Does ESP still allows staking?

[habibmad]

the new update work like a charm with 33 connections! off course with port-mapping.

but no staking until now, Cryptcoderez said that we have to wait until block 670000, so let's wait.

hope the best for the dev and the community of espers.

[BelgianBoy]

It's block 667000 we have to wait. Staking worked till 31/3. Normally i have every few minutes. I don't mind i lose stakes, as long everything is fixed and the price rises again.

[UGC]

It's block 667000 we have to wait. Staking worked till 31/3. Normally i have every few minutes. I don't mind i lose stakes, as long everything is fixed and the price rises again.

only 4900 blocks left to wait...

[VersiJinx]

I downloaded the gpuminer from the ann, tried both of them. can anyone please help me with a functional command line example to solo mine??

[xPliZit_xs]

Only have access to an older version v0.8.4.2-Patch 5 and the same problem happens.
Using addnodes  posted on previous forum page.

Espers version v0.8.4.2-Patch 5 (Oct.07.2016)
Using OpenSSL version OpenSSL 1.0.1t  3 May 2016
Startup time: 04/02/17 18:36:40
Default data directory C:\....\AppData\Roaming\ESP
Used data directory C:\....\AppData\Roaming\ESP
init message: Verifying database integrity...
dbenv.open LogDir=C:\....\AppData\Roaming\ESP\database ErrorFile=C:\....\AppData\Roaming\ESP\db.log
Bound to [::]:22448
Bound to 0.0.0.0:22448
init message: Loading block index...
Opening LevelDB in C:\....\AppData\Roaming\ESP\txleveldb
Transaction index version is 70509
Opened LevelDB successfully
LoadBlockIndex(): hashBestChain=000008d508d6e6577991a2f65fd974aea83c0644e6a0e1a3db047488e04398a3  height=0  trust=1048577  date=09/05/16 07:00:00
LoadBlockIndex(): synchronized checkpoint 000008d508d6e6577991a2f65fd974aea83c0644e6a0e1a3db047488e04398a3
Verifying last 0 blocks at level 1
 block index              13ms
init message: Loading wallet...
nFileVersion = 80402
Keys: 101 plaintext, 0 encrypted, 101 w/ metadata, 101 total
 wallet                   23ms
init message: Loading addresses...
Loaded 0 addresses from peers.dat  1ms
mapBlockIndex.size() = 1
nBestHeight = 0
setKeyPool.size() = 100
mapWallet.size() = 0
mapAddressBook.size() = 1
AddLocal([2001:0:9d38:953c:30af:2474:bb3b:cb08]:22448,1)
dnsseed thread start
Loading addresses from DNS seeds (could take a while)
0 addresses found from DNS seeds
dnsseed thread exit
net thread start
addcon thread start
opencon thread start
msghand thread start
dumpaddr thread start
init message: Done loading
Adding fixed seed nodes as DNS doesn't seem to be available.
Misbehaving: 85.255.7.224:22448 (0 -> 1)
ProcessMessage(ping, 8 bytes) FAILED
Misbehaving: 104.237.0.79:22448 (0 -> 1)
ProcessMessage(ping, 8 bytes) FAILED
Misbehaving: 198.245.50.213:22448 (0 -> 1)
ProcessMessage(ping, 8 bytes) FAILED
socket recv error 10054
Misbehaving: 85.255.7.224:22448 (0 -> 1)
ProcessMessage(ping, 8 bytes) FAILED



Espers.conf

listen=1
server=1
maxconnections=500
rpcuser=yourusername
rpcpassword=f2AQBc8Wsa1xVPfvJcrgRYwTiizs2trQ
port=22448
rpcport=22442
rpcconnect=127.0.0.1
addnode=199.26.184.214:22448
addnode=104.236.150.155:22448
addnode=159.203.24.196:22448
addnode=46.101.188.194:22448
addnode=173.18.196.253:22448
addnode=208.68.36.6:22448
addnode=146.185.153.196:22448
addnode=188.166.155.131:22448
addnode=107.170.212.222:22448
addnode=159.203.12.73:22448
addnode=217.175.119.126:22448
addnode=104.236.150.155:22448
addnode=144.76.237.39:22448
addnode=198.245.50.213:22448
addnode=85.255.7.224:22448
addnode=5.157.115.132:22448
addnode=24.228.192.97:22448
addnode=31.223.137.126:22448
addnode=46.101.188.194:22448
addnode=85.145.32.75:22448
addnode=91.121.77.74:22448
addnode=104.236.150.155:22448
addnode=104.237.0.79:22448
addnode=107.170.212.222:22448
addnode=120.24.217.96:22448
addnode=144.76.237.39:22448
addnode=146.185.153.196:22448
addnode=159.203.12.73:22448
addnode=159.203.24.196:22448
addnode=173.18.196.253:22448
addnode=188.68.49.137:22448
addnode=188.166.155.131:22448
addnode=199.26.184.214:22448
addnode=208.68.36.6:22448
addnode=217.175.119.126:22448

[alexcfr]

Yeah! You are on the right track. The conf creates itself and nodes are hardcoded, however, Coderz reccomended to delete the file before running. Just sticking to official instructions.
Also, some people had success with that same bootstrap. Pitty not working for some of you.
Your suspicion about the specific setup of each one of us probably screwing up could be right.

The bootstrap worked for me with patch 6 and it takes about 10 hours to import the blocks. Well it took about 10 hoursw for me.

I've had these nodes in conf (which I did not delete), they come from conf, Belgianboy and Nova:

Code:

addnode=199.26.184.214:22448
addnode=104.236.150.155:22448
addnode=159.203.24.196:22448
addnode=46.101.188.194:22448
addnode=173.18.196.253:22448
addnode=208.68.36.6:22448
addnode=146.185.153.196:22448
addnode=188.166.155.131:22448
addnode=107.170.212.222:22448
addnode=159.203.12.73:22448
addnode=217.175.119.126:22448
addnode=104.236.150.155:22448
addnode=144.76.237.39:22448
addnode=198.245.50.213:22448
addnode=85.255.7.224:22448
addnode=5.157.115.132:22448
addnode=24.228.192.97:22448
addnode=31.223.137.126:22448
addnode=46.101.188.194:22448
addnode=85.145.32.75:22448
addnode=91.121.77.74:22448
addnode=104.236.150.155:22448
addnode=104.237.0.79:22448
addnode=107.170.212.222:22448
addnode=120.24.217.96:22448
addnode=144.76.237.39:22448
addnode=146.185.153.196:22448
addnode=159.203.12.73:22448
addnode=159.203.24.196:22448
addnode=173.18.196.253:22448
addnode=188.68.49.137:22448
addnode=188.166.155.131:22448
addnode=199.26.184.214:22448
addnode=208.68.36.6:22448
addnode=217.175.119.126:22448

After it synced I updated to the version that CryptoCoderz released yesterday and it still works. Although: I got 1 stake on 31st.

So there

how to use this bootstrap ?
thanks

[UGC]

Great things ahead in ESPERS world. Just HODOR for next few weeks






HODOR ESPERS.........war is coming

[Vin]

Great things ahead in ESPERS world. Just HODOR for next few weeks






HODOR ESPERS.........war is coming

What do you mean?