Micky25
Legendary
Offline
Activity: 974
Merit: 1000
|
|
December 08, 2016, 06:31:13 PM |
|
miscellaneous leftovers
|
|
|
|
Biodom
Legendary
Offline
Activity: 3808
Merit: 4078
|
|
December 08, 2016, 06:34:10 PM Last edit: December 08, 2016, 07:21:18 PM by Biodom |
|
I think that they stopped showing batches even before. One thing of note: UPS is absent from delivery options and there is a big red sign showing during ordering saying that they should have your EN/SSN number on file if cost is above $2500.
EDIT: blockchain wallet asked me to reduce the fee and I listened, foolishly. It promised confirmation in 1 block and now 2-4 blocks and no confirm. Now i would have to wait for bitmain's rigamarole. Oh, well.
|
|
|
|
PeaMine
|
|
December 08, 2016, 07:23:11 PM |
|
You were right, just takes much longer than I expected to boot up fully. Though on the new autoset firmware, even 20 minutes still didn't connect. Rolled back for now.
Still at 5.6th? Up to around 7-8TH Looks like I lost one of the three boards?
|
Datacenter Technician and Electrician. If you have any questions feel free to ask me as I am generally bored looking at logs and happy to help during free time.
|
|
|
PeaMine
|
|
December 08, 2016, 08:05:36 PM |
|
No UPS option this time either, which never gave me problems. Fedex would give me problems. Plus asking for SSN and such on the order page, never asked me about that before.
|
Datacenter Technician and Electrician. If you have any questions feel free to ask me as I am generally bored looking at logs and happy to help during free time.
|
|
|
unsoindovo
Legendary
Offline
Activity: 1932
Merit: 1042
https://locktrip.com/?refId=40964
|
|
December 08, 2016, 08:13:39 PM |
|
No UPS option this time either, which never gave me problems. Fedex would give me problems. Plus asking for SSN and such on the order page, never asked me about that before.
Ok. But how bitmain can verify if given SSN is good? This is an useful request
|
|
|
|
Biodom
Legendary
Offline
Activity: 3808
Merit: 4078
|
|
December 08, 2016, 08:18:16 PM |
|
No UPS option this time either, which never gave me problems. Fedex would give me problems. Plus asking for SSN and such on the order page, never asked me about that before.
Ok. But how bitmain can verify if given SSN is good? This is an useful request this is FEDEX req, not bitmain's, on orders $2500 and above. basically, if you order 2 or more.
|
|
|
|
PPOC
|
|
December 08, 2016, 08:20:00 PM |
|
S9 now on sale on Bitmain store front...
What a deal at 1445+shipping for 13.5 TH, even with free power thats over 5.5 months but with Diff looking like its on the up swing, more like 7-8 months for ROI with FREE POWER. Good luck with that, I have 20 S7's that I have started selling off and down to 8 left. Time to cash in and just buy BTC and hold. Maybe I'll keep one for heat this winter, actually doing better with GPU's and HW is always worth something when done with it.
|
BTC: 1Bo6YsPeHCrVRygHLJg9BwHeaLSQpppcJi "Lost coins only make everyone else’s coins worth slightly more. Think of it as a donation to everyone."
|
|
|
AriesIV10
Legendary
Offline
Activity: 1260
Merit: 1006
Mine for a Bit
|
|
December 08, 2016, 08:20:27 PM |
|
S9 now on sale on Bitmain store front...
...this time no notification on twitter!!! strange behaviour. why they do not spread the news this time? mmmmmmmmmmmmmm.... They probably have a limited quantity. Notice that they also have a single miner for sale... I am with you on the mmmmmm.
|
|
|
|
Biodom
Legendary
Offline
Activity: 3808
Merit: 4078
|
|
December 08, 2016, 08:27:36 PM Last edit: December 08, 2016, 08:37:44 PM by Biodom |
|
S9 now on sale on Bitmain store front...
...this time no notification on twitter!!! strange behaviour. why they do not spread the news this time? mmmmmmmmmmmmmm.... They probably have a limited quantity. Notice that they also have a single miner for sale... I am with you on the mmmmmm. interestingly, there are no specs so far. i think that these are 14th (b23) that did not quite make it to 14Th. I have a question: i have one S9 that has much higher speed fan on the back than in front. Bitmain says that fan in front is up to 6000rpm, and back one up to 4000rpm, but i have it backwards and that miner is actually running a bit hotter. Does anybody think that it is worth reversing the fans? Miner is in hosting, so i cannot visually inspect the fans. Can someone confirm that front and back fans are actually different (model, appearance, etc)? Or is it possible that bitmain simply connected fans to the wrong connectors, unlikely as it is. thanks.
|
|
|
|
gt_addict
|
|
December 08, 2016, 09:07:06 PM |
|
S9 now on sale on Bitmain store front...
...this time no notification on twitter!!! strange behaviour. why they do not spread the news this time? mmmmmmmmmmmmmm.... They probably have a limited quantity. Notice that they also have a single miner for sale... I am with you on the mmmmmm. interestingly, there are no specs so far. i think that these are 14th (b23) that did not quite make it to 14Th. I have a question: i have one S9 that has much higher speed fan on the back than in front. Bitmain says that fan in front is up to 6000rpm, and back one up to 4000rpm, but i have it backwards and that miner is actually running a bit hotter. Does anybody think that it is worth reversing the fans? Miner is in hosting, so i cannot visually inspect the fans. Can someone confirm that front and back fans are actually different (model, appearance, etc)? Or is it possible that bitmain simply connected fans to the wrong connectors, unlikely as it is. thanks. My second hand 11.85th S9 had these fans on before I swapped them both out. Back one would run faster (and whine) than the front. In the picture the left fan is front and right fan was rear:- Hope this helps some
|
**SUPPORT SIDEHACK** Miner Development Donations to: 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr
Donations/Tips to:- 1GTADDicTXD1uachKKgW24DZDxDGhSMdRa
Join Bitconnect: https://bitconnect.co/?ref=gtaddict
|
|
|
Biodom
Legendary
Offline
Activity: 3808
Merit: 4078
|
|
December 08, 2016, 09:37:30 PM |
|
S9 now on sale on Bitmain store front...
...this time no notification on twitter!!! strange behaviour. why they do not spread the news this time? mmmmmmmmmmmmmm.... They probably have a limited quantity. Notice that they also have a single miner for sale... I am with you on the mmmmmm. interestingly, there are no specs so far. i think that these are 14th (b23) that did not quite make it to 14Th. I have a question: i have one S9 that has much higher speed fan on the back than in front. Bitmain says that fan in front is up to 6000rpm, and back one up to 4000rpm, but i have it backwards and that miner is actually running a bit hotter. Does anybody think that it is worth reversing the fans? Miner is in hosting, so i cannot visually inspect the fans. Can someone confirm that front and back fans are actually different (model, appearance, etc)? Or is it possible that bitmain simply connected fans to the wrong connectors, unlikely as it is. thanks. My second hand 11.85th S9 had these fans on before I swapped them both out. Back one would run faster (and whine) than the front. In the picture the left fan is front and right fan was rear:- img clipped Hope this helps some great, this helps so much, big thanks! It seems that you also had higher speed on the back fan, which should not be happening according to specs. I will try to ascertain if they simply misplaced the fans (put them backwards: back in front, etc). When you swapped them, where did you get replacements: from Bitmain or elsewhere?
|
|
|
|
gt_addict
|
|
December 08, 2016, 09:51:00 PM |
|
The front was a Delta QFR1212GHE 12v 2.70A and the rear only had the markings "JSL" but no model number or even direction of flow.
A piece of additional info. Even though ive swapped them out for different ones the rear fan is still 120rpm faster than the front. Front 1800rpm - Rear 1920rpm set at 25% speed
|
**SUPPORT SIDEHACK** Miner Development Donations to: 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr
Donations/Tips to:- 1GTADDicTXD1uachKKgW24DZDxDGhSMdRa
Join Bitconnect: https://bitconnect.co/?ref=gtaddict
|
|
|
wolfen
|
|
December 08, 2016, 09:53:16 PM |
|
No UPS option this time either, which never gave me problems. Fedex would give me problems. Plus asking for SSN and such on the order page, never asked me about that before.
Ok. But how bitmain can verify if given SSN is good? This is an useful request this is FEDEX req, not bitmain's, on orders $2500 and above. basically, if you order 2 or more. Only order one at a time or customs will ding you.
|
For those about to block we salute you! AC->BTC
|
|
|
wolfen
|
|
December 08, 2016, 09:56:55 PM |
|
You were right, just takes much longer than I expected to boot up fully. Though on the new autoset firmware, even 20 minutes still didn't connect. Rolled back for now.
Still at 5.6th? Up to around 7-8TH Looks like I lost one of the three boards? Sounds about right. You get separate stats for each board. Can you get a pic?
|
For those about to block we salute you! AC->BTC
|
|
|
mettalmag
Legendary
Offline
Activity: 1084
Merit: 1003
≡v≡
|
|
December 08, 2016, 10:15:10 PM |
|
S9-s are on sale right now but they only accept bitcoin payments that's too bad. Does anyone know why only BTC, atm I'm only able to wire transfer
|
|
|
|
Biodom
Legendary
Offline
Activity: 3808
Merit: 4078
|
|
December 08, 2016, 10:19:35 PM Last edit: December 08, 2016, 10:55:33 PM by Biodom |
|
The front was a Delta QFR1212GHE 12v 2.70A and the rear only had the markings "JSL" but no model number or even direction of flow.
A piece of additional info. Even though ive swapped them out for different ones the rear fan is still 120rpm faster than the front. Front 1800rpm - Rear 1920rpm set at 25% speed
thanks for info, aliexpress has those for less than $20 with slow shipping. i managed to find the rear one: http://support.bitmain.com/hc/en-us/articles/226303188-Fan-data-S9DW12038H12TB with 4300 rpm, which matches the specs. however, what i wonder is how that S9 I was talking about can have 4300 in front (pos1) and 5900 in back (pos2). back fan cannot possibly produce this kind of speeds (4300 limit), which made me think that Bitmain had misplaced the fans. i found, then lost bitmainwarranty's post with a picture of connectors for pos 1 and 2 (pos1 wire is straight and pos3 curly/twisted as far as i remember from his picture), which matches your pics as well. Mind you, it is pos1 and pos3 in S7, but pos1,2 on non-autotune S9, ut post 3 and 6 on autotune 11th one.
|
|
|
|
wolfen
|
|
December 08, 2016, 10:39:23 PM Last edit: December 08, 2016, 10:52:40 PM by wolfen |
|
All my s9's have 6000rpm fans front and back. Big beefy motors. I had an s9 fan replaced from denver, was only a 5000rpm s7 fan, smaller motor. Gets the job done on an s9. You can get s7 fans on amazon $18 free ship 2 days. They are good enough to cool an s9. https://www.amazon.com/gp/product/B01E8YS122/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1The s9 and s7 generate the same heat, use same wattage. 7-15 firmware hashes faster and runs cooler than 11-29 firmware on my 11.85th s9 with replaced boards. Plus the fan speed doesn't jack all around.
|
For those about to block we salute you! AC->BTC
|
|
|
takagari
Legendary
Offline
Activity: 1050
Merit: 1000
|
|
December 08, 2016, 10:47:41 PM |
|
The front was a Delta QFR1212GHE 12v 2.70A and the rear only had the markings "JSL" but no model number or even direction of flow.
A piece of additional info. Even though ive swapped them out for different ones the rear fan is still 120rpm faster than the front. Front 1800rpm - Rear 1920rpm set at 25% speed
What did you replace with? did I miss that? Did you get rid of the wine with new fans?
|
|
|
|
Biodom
Legendary
Offline
Activity: 3808
Merit: 4078
|
|
December 08, 2016, 11:00:47 PM |
|
All my s9's have 6000rpm fans front and back. Big beefy motors. I had an s9 fan replaced from denver, was only a 5000rpm s7 fan, smaller motor. Gets the job done on an s9. You can get s7 fans on amazon $18 free ship 2 days. They are good enough to cool an s9. https://www.amazon.com/gp/product/B01E8YS122/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1The s9 and s7 generate the same heat, use same wattage. 7-15 firmware hashes faster and runs cooler than 11-29 firmware on my 11.85th s9 with replaced boards. Plus the fan speed doesn't jack all around. thanks, but it could not get any more confusing than this; why then they had 6000rpm fan when 4300 is OK? A rhetorical question, of course. all i know is what they wrote (6K front, 4.3K back), but one of my S9 has it in reverse (4.2-4.3K pos1, 5.9K pos2). the question is: why? either they reverse fans or they reverse connectors (maybe more likely). I am thinking that they made a mistake and if i reverse it to proper, maybe i can boost this miner from 11.85 to 12.93 by freq adjustment.
|
|
|
|
PeaMine
|
|
December 08, 2016, 11:22:06 PM |
|
You were right, just takes much longer than I expected to boot up fully. Though on the new autoset firmware, even 20 minutes still didn't connect. Rolled back for now.
Still at 5.6th? Up to around 7-8TH Looks like I lost one of the three boards? Sounds about right. You get separate stats for each board. Can you get a pic? Just 2 lines, so yeap one is down, tried switching everything up, dead board?
|
Datacenter Technician and Electrician. If you have any questions feel free to ask me as I am generally bored looking at logs and happy to help during free time.
|
|
|
|