usao
Legendary
 Offline
Activity: 1109
Merit: 1000
|
 |
October 28, 2016, 02:15:46 AM |
|
Anyone know if there are some instructions somewhere?
I cant seem to make any headway...
Does anyone have a working miner?
I would appreciate some help.
|
|
|
|
|
usao
Legendary
Offline
Activity: 1109
Merit: 1000
|
|
October 28, 2016, 02:36:30 AM |
|
Thanks for the help with the power. I got it started and connected on the network now.
I wish they had simply used DHCP instead of some screwey non routeable address.
Anyhow, now that its online, all I get is
Error getting device list: ERR: socket connect(0) failed
Anyone know what that means? Im assuming they are trying to connect to some network socket but I dont know where.
I dont have a network sniffer either, so dont know what its trying to connect to.
Also, the GUI that I have has 3 rows for miners, but they all are called "POOL 1# ADD", but there is no button to actually add an address.
Every time I reboot, it looses what type in and reverts to the default.
Does anyone know how to get it to save an address on reboot?
|
|
|
|
|
usao
Legendary
Offline
Activity: 1109
Merit: 1000
|
|
October 28, 2016, 03:59:07 AM |
|
Does anyone know how to ssh into the pi? I dont know the root password...
Im trying to track down why it cannot connect:
Error getting device list: ERR: socket connect(0) failed
|
|
|
|
|
|
firehawk71
|
|
October 28, 2016, 03:52:28 PM |
|
Does anyone know how to ssh into the pi? I dont know the root password...
Im trying to track down why it cannot connect:
Error getting device list: ERR: socket connect(0) failed
Are you entering a voltage? 800mv is what I use but miner will not start without a voltage setting and it does not save so it has to be entered on every re-start |
|
|
|
|
usao
Legendary
Offline
Activity: 1109
Merit: 1000
|
|
October 28, 2016, 03:59:16 PM |
|
Yes, I got it working. I used 815mv per Chloe.
I would like to ssh into the box and modify the php or whatever code they have to fix a few issues:
1) All the pools are called "POOL 1#"
2) Clean up some of the English so id doesn't rub me the wrong way.
3) Pre-code the 815mv setting so I don't have to enter it every time it boots.
4) Add a "switch pool" button and possibly a pool #4.
However, don't know the ssh login.
I had it on the A2, and was able to update the web page to include more pools, and change the switch logic to allow me to go between any pools I had defined easily. Would like to do similar mods to the A4 code.
|
|
|
|
|
|
firehawk71
|
|
October 28, 2016, 04:04:52 PM |
|
Yes, I got it working. I used 815mv per Chloe.
I would like to ssh into the box and modify the php or whatever code they have to fix a few issues:
1) All the pools are called "POOL 1#"
2) Clean up some of the English so id doesn't rub me the wrong way.
3) Pre-code the 815mv setting so I don't have to enter it every time it boots.
4) Add a "switch pool" button and possibly a pool #4.
However, don't know the ssh login.
I had it on the A2, and was able to update the web page to include more pools, and change the switch logic to allow me to go between any pools I had defined easily. Would like to do similar mods to the A4 code.
I will have to try 815mv the highest I have tried is 810 but did not seem to make any diff with 800mv... I did notice the miner will pull more power from the wall set at 810mv I jumped from 1070 watts@800mv to 1090 watts 810mv at the wall. Yes this software is very buggy.. It would be great if someone with the skills could work with it.. Would it help if you just had the image of the software? If so let me know I have a back up of it |
|
|
|
|
usao
Legendary
Offline
Activity: 1109
Merit: 1000
|
|
October 28, 2016, 04:20:42 PM |
|
Na, First thing I did before even powering on was to make an IMG copy of the stick.
Ill take a peak and see if I can get to the files that way, but would prefer to get root login so I can add some other jobs to the system for monitoring and reporting anyhow.
Im wondering if they have documented the "low power" mode yet. They spoke of it in the video, to achieve the 1.5MH/W (or something similar). I would like to code in to the system a restart with power-level change for my 3pm-6pm window where my power rates are higher (Time of Use plan). I would go into "low-power" mode during the 3pm-6pm window. Don't know how to do that yet.
Hopefully something as simple as a "STOP, change voltage, START" sequence... Should be able to automate it.
|
|
|
|
|
Searing
Copper Member
Legendary
Offline
Activity: 2898
Merit: 1464
Clueless!
|
|
October 28, 2016, 05:26:10 PM |
|
Sent a pm to Superman. Er I mean Gen Tarkin. Maybe he will step. Or if nothing less needs a good Laugh. If I was innsilion I'd just give him a unit to mod this A4 firmware. http://gentarkincustomtitan.pcriot.comJust check out what he has done with Titan KNC scrypt miners. If anyone from Innsilicon reads this thread. It would get a sale from me with that kind of support |
Old Style Legacy Plug & Play BBS System. Get it from www.synchro.net. Updated 1/1/2021. It also works with Windows 10 and likely 11 and allows 16 bit DOS game doors on the same Win 10 Machine in Multi-Node! Five Minute Install! Look it over it uninstalls just as fast, if you simply want to look it over. Freeware! Full BBS System! It is a frigging hoot!:) |
|
|
usao
Legendary
Offline
Activity: 1109
Merit: 1000
|
|
October 28, 2016, 07:17:03 PM |
|
Is anyone powering their A4 with a HP-1200W server PSU with breakout board? Wasn't sure if 1200W would be sufficient or burnout.
|
|
|
|
|
usao
Legendary
Offline
Activity: 1109
Merit: 1000
|
|
October 30, 2016, 06:07:16 AM |
|
Anyone have the ssh login for the pi?
I would like to start patching the code asap.
|
|
|
|
|
Searing
Copper Member
Legendary
Offline
Activity: 2898
Merit: 1464
Clueless!
|
|
October 30, 2016, 07:33:59 AM |
|
Anyone have the ssh login for the pi?
I would like to start patching the code asap.
I heard from gen tarkin that the code is not open source? Or does that not matter worth a damn if you are just improving and not making money on it? Always been confused on how that all hung together. later |
Old Style Legacy Plug & Play BBS System. Get it from www.synchro.net. Updated 1/1/2021. It also works with Windows 10 and likely 11 and allows 16 bit DOS game doors on the same Win 10 Machine in Multi-Node! Five Minute Install! Look it over it uninstalls just as fast, if you simply want to look it over. Freeware! Full BBS System! It is a frigging hoot!:) |
|
|
|
firehawk71
|
|
October 30, 2016, 08:32:16 PM |
|
Anyone have the ssh login for the pi?
I would like to start patching the code asap.
yes this software sucks... I will contact my seller who is in china long shot but maybe he can lead me to someone.. This software I think was not made by insilocin it was prob made by china. The miner does not run well at all on coin switching pools like prohash.. It is not submitting shares properly.. Anyone have any luck on optimum settings? And what pool are you using? |
|
|
|
|
|
firehawk71
|
|
October 30, 2016, 09:39:33 PM |
|
Anyone have the ssh login for the pi?
I would like to start patching the code asap.
I heard from gen tarkin that the code is not open source? Or does that not matter worth a damn if you are just improving and not making money on it? Always been confused on how that all hung together. later I dont know if this seller in China knows but he got back to me and said there is no password that all the information is on the SD card. He also said there will be updated software in the future but no time frame. |
|
|
|
|
|
Eyedol-X
|
|
October 31, 2016, 03:53:55 PM |
|
Anyone have the ssh login for the pi?
I would like to start patching the code asap.
yes this software sucks... I will contact my seller who is in china long shot but maybe he can lead me to someone.. This software I think was not made by insilocin it was prob made by china. The miner does not run well at all on coin switching pools like prohash.. It is not submitting shares properly.. Anyone have any luck on optimum settings? And what pool are you using? This is really disappointing to hear, tried messing with the settings on prohash to change the restart delays? My A4 gets delivered today, hope I can make it work. |
|
|
|
|
|
firehawk71
|
|
October 31, 2016, 10:40:36 PM |
|
This is really disappointing to hear, tried messing with the settings on prohash to change the restart delays?
My A4 gets delivered today, hope I can make it work.
[/quote]There is a forum over at prohash where they are working on getting it stable. Some settings suggestions. I just got another unit today also
|
|
|
|
|
|
Eyedol-X
|
|
November 01, 2016, 02:43:12 AM |
|
Yes, I got it working. I used 815mv per Chloe.
I would like to ssh into the box and modify the php or whatever code they have to fix a few issues:
1) All the pools are called "POOL 1#"
2) Clean up some of the English so id doesn't rub me the wrong way.
3) Pre-code the 815mv setting so I don't have to enter it every time it boots.
4) Add a "switch pool" button and possibly a pool #4.
However, don't know the ssh login.
I had it on the A2, and was able to update the web page to include more pools, and change the switch logic to allow me to go between any pools I had defined easily. Would like to do similar mods to the A4 code.
I will have to try 815mv the highest I have tried is 810 but did not seem to make any diff with 800mv... I did notice the miner will pull more power from the wall set at 810mv I jumped from 1070 watts@800mv to 1090 watts 810mv at the wall. Yes this software is very buggy.. It would be great if someone with the skills could work with it.. Would it help if you just had the image of the software? If so let me know I have a back up of it The first time I loaded up the miner page tonight, the default value in the voltage box was 815mv so that's what I've been using. OMG this software sucks... The "default" setting for my speed though is 900mhz -- anyone else seeing this? |
|
|
|
|
|
firehawk71
|
|
November 01, 2016, 03:16:05 AM |
|
Yes, I got it working. I used 815mv per Chloe.
I would like to ssh into the box and modify the php or whatever code they have to fix a few issues:
1) All the pools are called "POOL 1#"
2) Clean up some of the English so id doesn't rub me the wrong way.
3) Pre-code the 815mv setting so I don't have to enter it every time it boots.
4) Add a "switch pool" button and possibly a pool #4.
However, don't know the ssh login.
I had it on the A2, and was able to update the web page to include more pools, and change the switch logic to allow me to go between any pools I had defined easily. Would like to do similar mods to the A4 code.
I will have to try 815mv the highest I have tried is 810 but did not seem to make any diff with 800mv... I did notice the miner will pull more power from the wall set at 810mv I jumped from 1070 watts@800mv to 1090 watts 810mv at the wall. Yes this software is very buggy.. It would be great if someone with the skills could work with it.. Would it help if you just had the image of the software? If so let me know I have a back up of it The first time I loaded up the miner page tonight, the default value in the voltage box was 815mv so that's what I've been using. OMG this software sucks... The "default" setting for my speed though is 900mhz -- anyone else seeing this? Yep software is crap.. Mine did not have a value in the mv box and I could not figure out why the miner was not starting! Someome said the factory setting is 800mv. If you get a magnifier glass and look at instructions you can barley see it! The higher that voltage the more power you will pull from the wall.. We need someone to re-write the software. We need DHCP among other things.. Miner is unstable as hell |
|
|
|
|
|
Eyedol-X
|
|
November 01, 2016, 03:53:02 AM |
|
Yes, I got it working. I used 815mv per Chloe.
I would like to ssh into the box and modify the php or whatever code they have to fix a few issues:
1) All the pools are called "POOL 1#"
2) Clean up some of the English so id doesn't rub me the wrong way.
3) Pre-code the 815mv setting so I don't have to enter it every time it boots.
4) Add a "switch pool" button and possibly a pool #4.
However, don't know the ssh login.
I had it on the A2, and was able to update the web page to include more pools, and change the switch logic to allow me to go between any pools I had defined easily. Would like to do similar mods to the A4 code.
I will have to try 815mv the highest I have tried is 810 but did not seem to make any diff with 800mv... I did notice the miner will pull more power from the wall set at 810mv I jumped from 1070 watts@800mv to 1090 watts 810mv at the wall. Yes this software is very buggy.. It would be great if someone with the skills could work with it.. Would it help if you just had the image of the software? If so let me know I have a back up of it The first time I loaded up the miner page tonight, the default value in the voltage box was 815mv so that's what I've been using. OMG this software sucks... The "default" setting for my speed though is 900mhz -- anyone else seeing this? Yep software is crap.. Mine did not have a value in the mv box and I could not figure out why the miner was not starting! Someome said the factory setting is 800mv. If you get a magnifier glass and look at instructions you can barley see it! The higher that voltage the more power you will pull from the wall.. We need someone to re-write the software. We need DHCP among other things.. Miner is unstable as hell Was your default speed 900mhz? Mine is hashing around 202-205mh with that setting... I see screenshots showing 1200mhz as the default |
|
|
|
|
|
firehawk71
|
|
November 01, 2016, 04:10:45 AM |
|
Yes, I got it working. I used 815mv per Chloe.
I would like to ssh into the box and modify the php or whatever code they have to fix a few issues:
1) All the pools are called "POOL 1#"
2) Clean up some of the English so id doesn't rub me the wrong way.
3) Pre-code the 815mv setting so I don't have to enter it every time it boots.
4) Add a "switch pool" button and possibly a pool #4.
However, don't know the ssh login.
I had it on the A2, and was able to update the web page to include more pools, and change the switch logic to allow me to go between any pools I had defined easily. Would like to do similar mods to the A4 code.
I will have to try 815mv the highest I have tried is 810 but did not seem to make any diff with 800mv... I did notice the miner will pull more power from the wall set at 810mv I jumped from 1070 watts@800mv to 1090 watts 810mv at the wall. Yes this software is very buggy.. It would be great if someone with the skills could work with it.. Would it help if you just had the image of the software? If so let me know I have a back up of it The first time I loaded up the miner page tonight, the default value in the voltage box was 815mv so that's what I've been using. OMG this software sucks... The "default" setting for my speed though is 900mhz -- anyone else seeing this? Yep software is crap.. Mine did not have a value in the mv box and I could not figure out why the miner was not starting! Someome said the factory setting is 800mv. If you get a magnifier glass and look at instructions you can barley see it! The higher that voltage the more power you will pull from the wall.. We need someone to re-write the software. We need DHCP among other things.. Miner is unstable as hell Was your default speed 900mhz? Mine is hashing around 202-205mh with that setting... I see screenshots showing 1200mhz as the default I dont know why they say its Default 900 mine says that also. But you need to change it to 1200 and I use 800mv. |
|
|
|
|
|
Eyedol-X
|
|
November 01, 2016, 04:53:50 AM |
|
I dont know why they say its Default 900 mine says that also. But you need to change it to 1200 and I use 800mv.
Just found this on an inno video and switched mine to 800, still leaving mine at 900mhz for now.  |
|
|
|
|
|
