DunePilot
Newbie
Offline
Activity: 32
Merit: 0
|
|
November 14, 2017, 08:54:59 PM |
|
TRY
--rawintensity 1000
omit the "-w 8"
What will that do? I have it working now, I've tried 1000, 1008, 1024, 1156. 1156 gets about 730MH a card where as the others I get 676MH a card. So no one knows if you can make SGMiner run 2 threads in SMOS? Or a way to get Claymore XMR to work? I'm just disappointed with the hashrate.. I get almost 31MH/s out of these same RX 580s on ETH. I figure I should be in the 900s for this algo.
|
|
|
|
jiri.lhotsky
Newbie
Offline
Activity: 6
Merit: 0
|
|
November 15, 2017, 01:25:26 AM |
|
Hey guys, I'm having this very strange and odd behavior on my first 12 GPU rig (TB250-BTC PRO, 1070's). The bios is set up properly, the USB flashed with the latest SMOS but the only thing I get after power-on and ubuntu startup is the following screen with non-ending repeating message... No updates starting, the rig obviously not visible in the web console. I spent the whole day trying all possible stuff... I would appreciate any kind of helping hand here. Thank y alot. Screen shows: Ubuntu 16.04.1 LTS simpleminer tty1 simpleminer login: miner (automatic login) Welcome to Ubuntu 16.04.1 LTS (GNU/Linux 4.11.12-041112-generic x86_64) * Documentation: https://help.ubuntu.com * Management: https://landscape.canonical.com * Support: https://ubuntu.com/advantageThere is no screen to be attached matching miner. [ 26.260057] rc.local[776]: /root/utils/rclocal.sh: line 13: [: ==: unary operator expected [ 26.260210] rc.local[776]: /root/utils/rclocal.sh: line 17: [: ==: unary operator expected [ 26.260096] rc.local[776]: /root/utils/rclocal.sh: line 21: [: ==: unary operator expected There is no screen to be attached matching miner. There is no screen to be attached matching miner. There is no screen to be attached matching miner. There is no screen to be attached matching miner. There is no screen to be attached matching miner. There is no screen to be attached matching miner. . . . etc.
|
|
|
|
logicassets
Newbie
Offline
Activity: 49
Merit: 0
|
|
November 15, 2017, 03:55:32 AM |
|
Not GPU's posted. Check risers first. Start with one GPU and increment... literally. Hey guys, I'm having this very strange and odd behavior on my first 12 GPU rig (TB250-BTC PRO, 1070's). The bios is set up properly, the USB flashed with the latest SMOS but the only thing I get after power-on and ubuntu startup is the following screen with non-ending repeating message... No updates starting, the rig obviously not visible in the web console. I spent the whole day trying all possible stuff... I would appreciate any kind of helping hand here. Thank y alot. Screen shows: Ubuntu 16.04.1 LTS simpleminer tty1 simpleminer login: miner (automatic login) Welcome to Ubuntu 16.04.1 LTS (GNU/Linux 4.11.12-041112-generic x86_64) * Documentation: https://help.ubuntu.com * Management: https://landscape.canonical.com * Support: https://ubuntu.com/advantageThere is no screen to be attached matching miner. [ 26.260057] rc.local[776]: /root/utils/rclocal.sh: line 13: [: ==: unary operator expected [ 26.260210] rc.local[776]: /root/utils/rclocal.sh: line 17: [: ==: unary operator expected [ 26.260096] rc.local[776]: /root/utils/rclocal.sh: line 21: [: ==: unary operator expected There is no screen to be attached matching miner. There is no screen to be attached matching miner. There is no screen to be attached matching miner. There is no screen to be attached matching miner. There is no screen to be attached matching miner. There is no screen to be attached matching miner. . . . etc.
|
|
|
|
redalert11
Newbie
Offline
Activity: 76
Merit: 0
|
|
November 15, 2017, 05:20:36 AM |
|
You could have a bad riser? Have you unplugging all the cards and just leaving 1 in?
|
|
|
|
DunePilot
Newbie
Offline
Activity: 32
Merit: 0
|
|
November 15, 2017, 06:10:10 AM |
|
Hey guys, I'm having this very strange and odd behavior on my first 12 GPU rig (TB250-BTC PRO, 1070's). The bios is set up properly, the USB flashed with the latest SMOS but the only thing I get after power-on and ubuntu startup is the following screen with non-ending repeating message... No updates starting, the rig obviously not visible in the web console. I spent the whole day trying all possible stuff... I would appreciate any kind of helping hand here. Thank y alot. Screen shows: Ubuntu 16.04.1 LTS simpleminer tty1 simpleminer login: miner (automatic login) Welcome to Ubuntu 16.04.1 LTS (GNU/Linux 4.11.12-041112-generic x86_64) * Documentation: https://help.ubuntu.com * Management: https://landscape.canonical.com * Support: https://ubuntu.com/advantageThere is no screen to be attached matching miner. [ 26.260057] rc.local[776]: /root/utils/rclocal.sh: line 13: [: ==: unary operator expected [ 26.260210] rc.local[776]: /root/utils/rclocal.sh: line 17: [: ==: unary operator expected [ 26.260096] rc.local[776]: /root/utils/rclocal.sh: line 21: [: ==: unary operator expected There is no screen to be attached matching miner. There is no screen to be attached matching miner. There is no screen to be attached matching miner. There is no screen to be attached matching miner. There is no screen to be attached matching miner. There is no screen to be attached matching miner. . . . etc. I had the same thing the first time but that was so long ago I don't remember. I would down to 1 card and also make sure your BIOS is set to iGPU (the CPUs GPU) as the default video out. Don't leave that on auto. There were two or three things I had to change in the BIOS on my ASROCK Mining board but after that it was golden.
|
|
|
|
davemanet
|
|
November 15, 2017, 08:27:25 AM |
|
Anyone have the Asus B250 Mining board and can't get restart to work? If my system resets overnight, it just goes in a loop instead of automatically mining. I have to shutdown first in order to get it to work again :/
|
|
|
|
dagarair
|
|
November 15, 2017, 12:39:25 PM |
|
I can't get a TB250-BTC+ to boot on this OS? Anyone have one working?
|
|
|
|
mfsmarques
Member
Offline
Activity: 65
Merit: 10
|
|
November 15, 2017, 12:41:52 PM |
|
Anyone have the Asus B250 Mining board and can't get restart to work? If my system resets overnight, it just goes in a loop instead of automatically mining. I have to shutdown first in order to get it to work again :/
I'm having the same problem, and neither in the new beta has been solved.
|
|
|
|
LuisaoL
Newbie
Offline
Activity: 7
Merit: 0
|
|
November 15, 2017, 09:17:16 PM |
|
I have motherboard GA-MA770T-UD3P and 5x RX 470. I can boot and mining with 4 cards fine but when I add 5th card there is a problem. Tryed another same mainboard but nothing changed
I have no idea. Can you help me please? Mainboard support 5th card i saw somebody have this board on his rigs.
Try those settings: 1) Make sure you're running the latest BIOS! 2) Enable 4G 3) Set PCIe support to "Auto" - DO NOT MANUALLY SET TO GEN1. THIS CAUSES MAJOR ISSUES 4) Enable onboard graphics startup as first! I believe this is changing "PEG" to "IGD" or something in the Advanced BIOS 5) Plug your monitor into the ONBOARD graphics 6) Use either simpleminer-RX-v1093-4.11.rc8-16.60-enableexe0ANDips0.imgc or simpleminer-RX-v1093-4.11.rc8-16.60-enablerc60.imgc (sorry, I don't remember which I used!) https://simplemining.net/download/Is the SIA standalone miner more profitable than claymore dual ? Anyone have some stats ? Hi Tytanik, Is the Simplemining download site down??? Where can I get old img? Thanks
|
|
|
|
mfsmarques
Member
Offline
Activity: 65
Merit: 10
|
|
November 15, 2017, 10:33:56 PM |
|
I have motherboard GA-MA770T-UD3P and 5x RX 470. I can boot and mining with 4 cards fine but when I add 5th card there is a problem. Tryed another same mainboard but nothing changed
I have no idea. Can you help me please? Mainboard support 5th card i saw somebody have this board on his rigs.
Try those settings: 1) Make sure you're running the latest BIOS! 2) Enable 4G 3) Set PCIe support to "Auto" - DO NOT MANUALLY SET TO GEN1. THIS CAUSES MAJOR ISSUES 4) Enable onboard graphics startup as first! I believe this is changing "PEG" to "IGD" or something in the Advanced BIOS 5) Plug your monitor into the ONBOARD graphics 6) Use either simpleminer-RX-v1093-4.11.rc8-16.60-enableexe0ANDips0.imgc or simpleminer-RX-v1093-4.11.rc8-16.60-enablerc60.imgc (sorry, I don't remember which I used!) https://simplemining.net/download/Is the SIA standalone miner more profitable than claymore dual ? Anyone have some stats ? Hi Tytanik, Is the Simplemining download site down??? Where can I get old img? Thanks Use this link http://download.simplemining.net/
|
|
|
|
josh75
Newbie
Offline
Activity: 74
Merit: 0
|
|
November 15, 2017, 11:08:33 PM |
|
Hello all is it possible to mine FEATHERCOIN on simple mining ?
i am on ubuntu (linux), mining pool coinotron, gtx 1070's
but i dont find how to mine Feathercoin
thank you all
|
|
|
|
UnknownBTC
|
|
November 16, 2017, 01:23:07 AM |
|
Hello someone know how to set an auto restart every certain amount of time? Thank you
|
My custom wallet: 1LearBTCNt5HnruJFdPHH1VAYDKtnTbDYR
|
|
|
weka
Newbie
Offline
Activity: 14
Merit: 0
|
|
November 16, 2017, 02:40:47 AM |
|
Website: http://simplemining.net What is SimpleMining OS (SMOS) ?It is nice looking and easy Operating system for mining on AMD GPUs Most wanted info:- idea is simple: download for free my OS and write it to any drive: Hard / SSD / even USB drive - after that you just enter your email address in config.txt file and boot your rig - login to simplemining.net dashboard using the same email and start managing your rig - you can test it for free and then you need to pay only 2$ per rig per month - if there will be new miner i will implement it fast with auto-updates system Requirements:- R OS = AMD GPUs R300/R200/HD7xxx series - RX OS = AMD GPUs RX400/RX500 series - NV OS = Nvidia GPUs (alsmost all of them) - hard drive / ssd / usb drive - it must be 7GB or bigger - at least 1-4GB system memory (depend how much GPUs are you using and what miner) About me- I am linux admin for about 13 years and crypto miner for 5 years - Linux, programming, scripting, mining are my hobbies - i am honest and simple IT guy who whants to make world better and give something to it Video
please add dstm equihash miner for NV OS
|
|
|
|
DunePilot
Newbie
Offline
Activity: 32
Merit: 0
|
|
November 16, 2017, 02:50:12 AM |
|
Can you only mine 1 thread with SGMiner in SMOS or is there a way to make it run 2?
I tried "rawintensity 512 -w 4 -g 2 " but that didn't work.
|
|
|
|
Hoboka
Newbie
Offline
Activity: 2
Merit: 0
|
|
November 16, 2017, 06:34:49 AM |
|
Hi! I can set the IP address, DNS, GW in config.txt ? I don't have DHCP and can't connect to network. Thanks
|
|
|
|
valkir
Legendary
Offline
Activity: 1484
Merit: 1004
|
|
November 16, 2017, 08:23:16 AM |
|
Hey guys Playing a little bit with the OS. Wondering where is the default mining place ? Nice hash or dwarfpool?
|
██ Please support sidehack with his new miner project Send to :
1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr
|
|
|
IrenaN
Newbie
Offline
Activity: 42
Merit: 0
|
|
November 16, 2017, 10:36:43 AM |
|
hi)
has anyone tried claymore-zec-v12.6 for bitcoin gold?
i`m considering a try on rx 470
any adjustment necessary?
|
|
|
|
Blynda
Newbie
Offline
Activity: 11
Merit: 0
|
|
November 16, 2017, 04:13:41 PM |
|
I can't get a TB250-BTC+ to boot on this OS? Anyone have one working?
I have. Put bios to default , enable mining mode , enable on board graphics , use cable to motherboard not to gpu, try to boot smos
|
|
|
|
LuisaoL
Newbie
Offline
Activity: 7
Merit: 0
|
|
November 16, 2017, 05:00:28 PM |
|
For those waiting on the info for the MSI Z170A M5 Gaming board and 7x GPU support I finally have it working on both of my boards.
1) Make sure you're running the latest BIOS! 2) Enable 4G 3) Set PCIe support to "Auto" - DO NOT MANUALLY SET TO GEN1. THIS CAUSES MAJOR ISSUES 4) Enable onboard graphics startup as first! I believe this is changing "PEG" to "IGD" or something in the Advanced BIOS 5) Plug your monitor into the ONBOARD graphics 6) Use either simpleminer-RX-v1093-4.11.rc8-16.60-enableexe0ANDips0.imgc or simpleminer-RX-v1093-4.11.rc8-16.60-enablerc60.imgc (sorry, I don't remember which I used!)
My 14x GPUs have been stable all night long!
Thanks to Soothaa continuing after I gave up. I can now run 7 570s on my 170a boards! Anyhow, I've been carefully watching my power usage due to having to make sure I'm balancing the load of my machines across circuits. I'm not doing anything with the bios tuning to try and lower my power but I do set all them to power stage 4. With that, a 7 gpu rig runs under 1000w at the wall or just under 9 amps.
Can you tell me which image worked on Z170 ? Tytanick, Of the two Soothaa mentioned, I only tried simpleminer-RX-v1093-4.11.rc8-16.60-enableexe0ANDips0.img. That one worked so I never tried the second one he mentioned. Hi sootha and decayinjack, I'm also trying this simpleminer-RX-v1093-4.11.rc8-16.60-enableexe0ANDips0.img on my MSI Z170a Pro Carbon, but after booting the rig in Dashboard has a red "update" icon, did you able to update it?? I tried to update it, "check the screen shot" but not sure if it updated corretly. After the update the red icon still in my dashboard. Please help and thanks Screenshot https://imgur.com/a/d9Q2U
|
|
|
|
LuisaoL
Newbie
Offline
Activity: 7
Merit: 0
|
|
November 16, 2017, 05:40:47 PM |
|
ASUS Z270 P Yesterday it launched 8 cards
you use pcie extend 1x to 3x to get 8 gpu, you did with asus standard bios firmware or you used custum bios ? (cause msi Z170A GAMING PRO require a custum firmware to run 8 gpu) Thanks for any info. Hi drrobert, Do you have Z170A Gaming Pro or Z170A Gaming Pro Carbon? And its running 8gpu under Windows or Simplemining? Where can I get the custom BIOS? cheers
|
|
|
|
|