nikisev
Full Member
Activity: 266
Merit: 101
Im the very decease you pretend to be
|
 |
April 13, 2017, 06:03:23 PM |
|
Giusto can you tell me the hashrate of a stock rx 480 4GB and the hashrate of an overclocked One?And for the rx 470 4gb? Does It mines similiar ti the rx 480 4gb?
Hello, I use 6x the MSI RX470 gaming x 8GB cards. I have a hashrate from 279 sol each cards on zcash mining with ethOS 1.2.0 Total I have a hashrate from 1674 sol. On stock settings this card makes 165 sol My power consumption is for the total system 825 Watt from the wall. (including motherboard). Each card used 130 Watt with overclocking. (Stock is 110 Watt) I use the next settings for overclocking: mem : 1725 core: 1240 I hope this is usefull for you. 470 at 1180:1750@0.92v makes 278H (v 12.4 could be unstable 12.2 may be better) 480 at 1180:1750@0.92v makes 292H |
|
|
|
|
faaty
|
|
April 13, 2017, 06:11:16 PM |
|
is it wise to mine xmr with a r9 380 nitro 4gb gpu?
|
|
|
|
|
|
fittsy
|
|
April 13, 2017, 06:13:00 PM |
|
is it wise to mine xmr with a r9 380 nitro 4gb gpu?
This thread is about ZCASH not XMR. |
|
|
|
|
UnclWish
|
|
April 13, 2017, 06:43:15 PM |
|
is it wise to mine xmr with a r9 380 nitro 4gb gpu?
Yes. |
|
|
|
|
|
Toninho
|
|
April 13, 2017, 06:43:24 PM |
|
Hi, Claymore's v12.4 sometimes "stopped working " What it could be that causes?
On some cards 12.3 and 12.4 is very unstable. Try to use 12.2 version. I'm already testing 12.2 version... ty , I hope the version 12.5 is 100% ok. |
|
|
|
|
|
bisba
|
|
April 13, 2017, 07:23:36 PM
Last edit: April 14, 2017, 12:33:08 AM by bisba |
|
hey guys
i have the asus r9 280x hynix memory with stock bios- clocks and get about 290-295 H/s at -i 4
how many you gets with modded bios?
is it worth it modding the bios right now?
|
|
|
|
|
|
masewild
|
|
April 13, 2017, 07:31:13 PM |
|
hey guys
i have the asus r9 280x tahiti memory with stock bios- clocks and get about 290-295 H/s at -i 4
how many you gets with modded bios?
is it worth it modding the bios right now?
With the mod bios, you get about 1 to 2% improvement. |
|
|
|
|
UnclWish
|
|
April 13, 2017, 08:11:25 PM |
|
hey guys
i have the asus r9 280x tahiti memory with stock bios- clocks and get about 290-295 H/s at -i 4
how many you gets with modded bios?
is it worth it modding the bios right now?
I have Asus R9280X-DC2T-3GD5. Stock freq. 1070/1600 volt 1.2V. I use modded bios and clocks 1100/1600 and undervolt to 1.1V. I get 330 H/s on 12.2 with -i 5 (max) |
|
|
|
|
|
Elder III
|
|
April 13, 2017, 08:16:14 PM |
|
Hey guys this doesn't seem right. I'm running 2 rx 470s and 1 480. My watt meter says I'm using 580 Watts which seems high for 3 cards. Each card is at 80 watts.
What are the other components in your system? If you're running a higher power CPU that alone would be a good chunk of power. Your GPUs may say 80 watts on a monitoring program, but they are probably pulling at least 100 if not 120 watts in total. Are you using a Platinum, Gold, Silver, Bronze, or worse rated PSU? The efficiency of your PSU makes a significant difference at the wall...  |
|
|
|
|
amuleth
Newbie
Activity: 45
Merit: 0
|
|
April 13, 2017, 10:19:31 PM
Last edit: April 13, 2017, 10:38:53 PM by amuleth |
|
hey guys
i have the asus r9 280x tahiti memory with stock bios- clocks and get about 290-295 H/s at -i 4
how many you gets with modded bios?
is it worth it modding the bios right now?
I have Asus R9280X-DC2T-3GD5. Stock freq. 1070/1600 volt 1.2V. I use modded bios and clocks 1100/1600 and undervolt to 1.1V. I get 330 H/s on 12.2 with -i 5 (max) Sorry I'm a noob, how can I mod the bios? I've heard this but never done before. P.S I've the same card. |
|
|
|
|
redalert11
Newbie
Activity: 76
Merit: 0
|
|
April 14, 2017, 12:13:42 AM |
|
Hey guys this doesn't seem right. I'm running 2 rx 470s and 1 480. My watt meter says I'm using 580 Watts which seems high for 3 cards. Each card is at 80 watts.
What are the other components in your system? If you're running a higher power CPU that alone would be a good chunk of power. Your GPUs may say 80 watts on a monitoring program, but they are probably pulling at least 100 if not 120 watts in total. Are you using a Platinum, Gold, Silver, Bronze, or worse rated PSU? The efficiency of your PSU makes a significant difference at the wall... Intel I7 6700k my PSU is a Bronze rated 700 watt. Other than that 3 120mm fans, 2 80mm. That's it. |
|
|
|
|
Zealotki11er
Newbie
Activity: 19
Merit: 0
|
|
April 14, 2017, 01:15:10 AM |
|
Windows Defender just deleted .exe. Perfect.
|
|
|
|
|
|
Elder III
|
|
April 14, 2017, 01:24:36 AM |
|
Hey guys this doesn't seem right. I'm running 2 rx 470s and 1 480. My watt meter says I'm using 580 Watts which seems high for 3 cards. Each card is at 80 watts.
What are the other components in your system? If you're running a higher power CPU that alone would be a good chunk of power. Your GPUs may say 80 watts on a monitoring program, but they are probably pulling at least 100 if not 120 watts in total. Are you using a Platinum, Gold, Silver, Bronze, or worse rated PSU? The efficiency of your PSU makes a significant difference at the wall... Intel I7 6700k my PSU is a Bronze rated 700 watt. Other than that 3 120mm fans, 2 80mm. That's it. Well, most would recommend a Platinum or at least Gold PSU for mining, typically PSUs are even less efficient the closer they get to their max load too. In any case, your CPU is rated at 91w (granted that's under heavy load), Rx 470 @ 120 watt, Rx 470 @ 120 watt, Rx 480 @ 150 watt, 5x fans at ~5 watt each = 506 watt even without a HDD/SSD, RAM etc. If you're only operating at 80% efficiency with a Bronze PSU that puts you near the 600 watt mark right there. If you undervolt both the Core and Memory on each GPU you can reduce your power at the wall quite a bit (reduces heat and noise too of course). |
|
|
|
|
d57heinz
Legendary
Activity: 1453
Merit: 1011
Bitcoin Talks Bullshit Walks
|
|
April 14, 2017, 01:42:53 AM |
|
Need some help. Anyone here have a mixed rig with r9 fury and rx480. If so how did you get the drivers to install. I've tried to install 16.3.2 which is claymore recommendation for Fiji cards. But once it's finished installing it still shows yellow exclamation mark on the rx480. Those drivers should be new enough to operate the 480 correct? I'm runnin win 10 pro in this particular rig. It's my amd 8core pc. If I install more recent drivers like 16.12.2 for Polaris and it shows them all installed but upon running ZecMiner the Fiji never hashes. Shows full load and eventually hangs. Even if I turn off the gpu it still will show full load whilst the rx480 hashes. I've tried putting a dummy plug into the rx480 and a hdmi into fury during install still nothing. If I load the 16.3.2 i have to disable the rx480 for it to hash correctly. It will do the 40h/s thing if I don't. It will reach speeds of 460 h/s stock settings on its own. I'm really at a loss at things to try. Best thing I thought of was to pull a r9290x out of a rig and put the 480 in that and see if the r9 fury will play nice together with that. Any help or suggestions would be greatly appreciated.
Best Regards
d57heinz
|
As in nature, all is ebb and tide, all is wave motion, so it seems that in all branches of industry, alternating currents - electric wave motion - will have the sway. ~Nikola Tesla~
|
|
|
sorry2xs
Legendary
Activity: 924
Merit: 1000
Dark Passenger Bitcoin miner 2013,Bitcoin node
|
|
April 14, 2017, 04:28:29 AM |
|
ANYONE IN THE MARKET FOR SEVER PSU'S FROM 1200 TO 2000 WATT PLEASE PM FOR DETAILS  |
Please tip the Node 1MPWKB23NsZsXHANnFwVAWT86mL24fqAjF; KO4UX
THAT NO GOOD DO GOODER BAT!!!
|
|
|
sorry2xs
Legendary
Activity: 924
Merit: 1000
Dark Passenger Bitcoin miner 2013,Bitcoin node
|
|
April 14, 2017, 04:51:05 AM |
|
|
Please tip the Node 1MPWKB23NsZsXHANnFwVAWT86mL24fqAjF; KO4UX
THAT NO GOOD DO GOODER BAT!!!
|
|
|
Westant
Member
Activity: 355
Merit: 10
|
|
April 14, 2017, 06:29:44 AM |
|
Need some help. Anyone here have a mixed rig with r9 fury and rx480. If so how did you get the drivers to install. I've tried to install 16.3.2 which is claymore recommendation for Fiji cards. But once it's finished installing it still shows yellow exclamation mark on the rx480. Those drivers should be new enough to operate the 480 correct? I'm runnin win 10 pro in this particular rig. It's my amd 8core pc. If I install more recent drivers like 16.12.2 for Polaris and it shows them all installed but upon running ZecMiner the Fiji never hashes. Shows full load and eventually hangs. Even if I turn off the gpu it still will show full load whilst the rx480 hashes. I've tried putting a dummy plug into the rx480 and a hdmi into fury during install still nothing. If I load the 16.3.2 i have to disable the rx480 for it to hash correctly. It will do the 40h/s thing if I don't. It will reach speeds of 460 h/s stock settings on its own. I'm really at a loss at things to try. Best thing I thought of was to pull a r9290x out of a rig and put the 480 in that and see if the r9 fury will play nice together with that. Any help or suggestions would be greatly appreciated.
Best Regards
d57heinz
How many gpu do you have? If more than 5, you need to use 6+GPU mod. |
|
|
|
|
|
espressodelisi
|
|
April 14, 2017, 08:44:21 AM |
|
hey guys
i have the asus r9 280x tahiti memory with stock bios- clocks and get about 290-295 H/s at -i 4
how many you gets with modded bios?
is it worth it modding the bios right now?
I have Asus R9280X-DC2T-3GD5. Stock freq. 1070/1600 volt 1.2V. I use modded bios and clocks 1100/1600 and undervolt to 1.1V. I get 330 H/s on 12.2 with -i 5 (max) I have the same GPU but I could not modify the bios on it. What tools to mod that GPU bios? with stock voltage settings, it runs too hot with 1050/1500, I did not even tried 1600 mem clock on it. |
|
|
|
|
ITDiver
Member
Activity: 67
Merit: 10
|
|
April 14, 2017, 09:41:38 AM |
|
Hello! tonight half of my rigs at the same time stop mining - claymore crashes. Using flypool.
What can it be, and how something happend on flypool can crash miner?
|
|
|
|
|
mikecitt
Newbie
Activity: 17
Merit: 0
|
|
April 14, 2017, 09:47:48 AM |
|
where can i find custom bios for club 3d 280x hynix ?
You can made it youself. Just search via google "Tahiti bios modding". I can made it for you. Give me your bios rom, I make mod. I made it win atiwinflash and it's 128kb. is it okay? https://drive.google.com/open?id=0BxCVGjqzt-imYldaelNpVEJBSGcand thank you so much |
|
|
|
|
|
