Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux)

[prichina]

Also, I think suprnova's pool is better then flypool's....

[prichina]

where can i find custom bios for club 3d 280x hynix ?

You can made it youself. Just search via google "Tahiti bios modding". I can made it for you. Give me your bios rom, I make mod.

It is just change the memory timing. It is less effect now as the new miner use the core a lot.

Yeap, this is true...the new version atributes better with core then memory

[sorry2xs]

POWER COLOR 295X PM ME

[d57heinz]

Need some help. Anyone here have a mixed rig with r9 fury and rx480. If so how did you get the drivers to install. I've tried to install 16.3.2 which is claymore recommendation for Fiji cards. But once it's finished installing it still shows yellow exclamation mark on the rx480. Those drivers should be new enough to operate the 480 correct?  I'm runnin win 10 pro in this particular rig. It's my amd 8core pc.  If I install more recent drivers like 16.12.2 for Polaris and it shows them all installed but upon running ZecMiner the Fiji never hashes. Shows full load and eventually hangs. Even if I turn off the gpu it still will show full load whilst the rx480 hashes. I've tried putting a dummy plug into the rx480 and a hdmi into fury during install still nothing.  If I load the 16.3.2 i have to disable the rx480 for it to hash correctly. It will do the 40h/s thing if I don't. It will reach speeds of 460 h/s stock settings on its own.  I'm really at a loss at things to try.  Best thing I thought of was to pull a r9290x out of a rig and put the 480 in that and see if the r9 fury will play nice together with that.  Any help or suggestions would be greatly appreciated.  

Best Regards
d57heinz

How many gpu do you have? If more than 5, you need to use 6+GPU mod.

In this pc it's only two. I gave up trying it with five other rx480 thinking that was it. Does the same thing with one rx480 installed. I'll look into this. If ya have a link I'd appreciate it. Thanks for the tip

BR

IMHO, using RX480 for ZEC is a waste of hash power.
Best to get the Furies for ZEC and the RX480s for ETH.
R9 Fury Nanos, Fury X, Nitro etc. are right on the money for AMD cards (420-460 sols/s easy)

I agree completely. I was using zecminer for a test of the cards. I was planning on running two instances of the miner sw. One for eth one for zec.  I just can't seem to make them cooperate together. I think this morning I'll try to load 16.3.2 along side of 290x. See if that works.  I know the rx480 works in tangent with 7970 290 390's. Not sure what the deal is with mixing fury with 480's.  I've tried two different mobo and same results.

BR

my furies do not hash with versions above 16.3.2. I mean, zero hashes, so I can not mix them with the rx480 that requires later versions

Thank you very much. That is what I needed to know. I figured as much. I've been busy this morn haven't had a chance to get back to it. I'll pair it with a 390 or 290 and put the rx480 in the rig I swipe it from.  Appreciate the info.

BR

[Toninho]

I get the following error using 12.4 on windows 10 with AMD 15.12 driver.
It takes a few days before it happens. I have tested it with flypool also.



start script

@echo off
set GPU_FORCE_64BIT_PTR 1
set GPU_MAX_HEAP_SIZE 100
set GPU_USE_SYNC_OBJECTS 1
set GPU_MAX_ALLOC_PERCENT 100
set GPU_SINGLE_ALLOC_PERCENT 100
start  /ABOVENORMAL ZecMiner64.exe -zpool ssl://zcl.suprnova.cc:4142 -zwal ####.### -zpsw ###  -i 9 -a 0 -tt 67 -tstop 90 -mport -3333 -di 57201364 -r 1 -fanmin 80

log file

-snip-

This happens ever few hour. I really have not idea what is causing the problem. Also the popup stops the detection of it. Any suggestions?

Use the version 12.2... With me resulted 100% Perfect

I get 494 h/s --» 390x and 370 h/s --» 480 8G Nitro, In one of my rigs.

[dumpida]

I get the following error using 12.4 on windows 10 with AMD 15.12 driver.
It takes a few days before it happens. I have tested it with flypool also.

start script

@echo off
set GPU_FORCE_64BIT_PTR 1
set GPU_MAX_HEAP_SIZE 100
set GPU_USE_SYNC_OBJECTS 1
set GPU_MAX_ALLOC_PERCENT 100
set GPU_SINGLE_ALLOC_PERCENT 100
start  /ABOVENORMAL ZecMiner64.exe -zpool ssl://zcl.suprnova.cc:4142 -zwal ####.### -zpsw ###  -i 9 -a 0 -tt 67 -tstop 90 -mport -3333 -di 57201364 -r 1 -fanmin 80

log file

-snip-

This happens ever few hour. I really have not idea what is causing the problem. Also the popup stops the detection of it. Any suggestions?

Use the version 12.2... With me resulted 100% Perfect

I get 494 h/s --» 390x and 370 h/s --» 480 8G Nitro, In one of my rigs.

Is the 390X over clocked?

[Toninho]

I get the following error using 12.4 on windows 10 with AMD 15.12 driver.
It takes a few days before it happens. I have tested it with flypool also.

start script

@echo off
set GPU_FORCE_64BIT_PTR 1
set GPU_MAX_HEAP_SIZE 100
set GPU_USE_SYNC_OBJECTS 1
set GPU_MAX_ALLOC_PERCENT 100
set GPU_SINGLE_ALLOC_PERCENT 100
start  /ABOVENORMAL ZecMiner64.exe -zpool ssl://zcl.suprnova.cc:4142 -zwal ####.### -zpsw ###  -i 9 -a 0 -tt 67 -tstop 90 -mport -3333 -di 57201364 -r 1 -fanmin 80

log file

-snip-

This happens ever few hour. I really have not idea what is causing the problem. Also the popup stops the detection of it. Any suggestions?

Use the version 12.2... With me resulted 100% Perfect

I get 494 h/s --» 390x and 370 h/s --» 480 8G Nitro, In one of my rigs.

Is the 390X over clocked?

Gigabyte 390X G1 Gaming 8GB
Yes, cpu --»1150 and mem --»1650

[prichina]

VOTES for v 12.5

[amuleth]

VOTES for v 12.5

Yay! We need more speed! 

[d57heinz]

Ok to continue the fury saga.  I've got it mining. But it seems it has some weird issue when paired with any other card.  To top it off if I turn off asm it will mine with the second card and never skips a beat.  Problem is it's about 150 hashes per sec short of asm mode.  I've tried both drivers 15.12 and 16.3.2. Both have the same results. Weird thing is once it locks up and flashes the screen black hashes goto 0 on fury and a reboot will not fix it.  I have to use ddu uninstall the drivers and reinstall and it will mine again.  Asm mode will mine for exactly 7 minutes then crash.  Then I have to repeat the uninstall and reinstall the drivers.  I've tried it in two different mobos with same results.  I finally gave up and left it in by itself to see if it will mine thru the night.  After 1 hour of babysitting it I left. Figure it should continue thru the night. 460 h/s stable when I left.  I really don't understand this at all.  I've tried several versions of claymore miner back down to ver 10. Ver 10 works but what I find is odd with it is it shows the 7970 as algo 2 and the fury using algo 1. No asm in that version.  But when I run ver 12 and up it shows both cards as algo 2.  Uff sucks when ya can't figure out what is the issue. I've spent two whole days now troubleshooting. Anyone have any other trick I can try?  Would be really appreciated.  

BR
d57heinz

[LandOwner]

Ok to continue the fury saga.  I've got it mining. But it seems it has some weird issue when paired with any other card.  To top it off if I turn off asm it will mine with the second card and never skips a beat.  Problem is it's about 150 hashes per sec short of asm mode.  I've tried both drivers 15.12 and 16.3.2. Both have the same results. Weird thing is once it locks up and flashes the screen black hashes goto 0 on fury and a reboot will not fix it.  I have to use ddu uninstall the drivers and reinstall and it will mine again.  Asm mode will mine for exactly 7 minutes then crash.  Then I have to repeat the uninstall and reinstall the drivers.  I've tried it in two different mobos with same results.  I finally gave up and left it in by itself to see if it will mine thru the night.  After 1 hour of babysitting it I left. Figure it should continue thru the night. 460 h/s stable when I left.  I really don't understand this at all.  I've tried several versions of claymore miner back down to ver 10. Ver 10 works but what I find is odd with it is it shows the 7970 as algo 2 and the fury using algo 1. No asm in that version.  But when I run ver 12 and up it shows both cards as algo 2.  Uff sucks when ya can't figure out what is the issue. I've spent two whole days now troubleshooting. Anyone have any other trick I can try?  Would be really appreciated.  

BR
d57heinz

Can you change the main display card?

[d57heinz]

Ok to continue the fury saga.  I've got it mining. But it seems it has some weird issue when paired with any other card.  To top it off if I turn off asm it will mine with the second card and never skips a beat.  Problem is it's about 150 hashes per sec short of asm mode.  I've tried both drivers 15.12 and 16.3.2. Both have the same results. Weird thing is once it locks up and flashes the screen black hashes goto 0 on fury and a reboot will not fix it.  I have to use ddu uninstall the drivers and reinstall and it will mine again.  Asm mode will mine for exactly 7 minutes then crash.  Then I have to repeat the uninstall and reinstall the drivers.  I've tried it in two different mobos with same results.  I finally gave up and left it in by itself to see if it will mine thru the night.  After 1 hour of babysitting it I left. Figure it should continue thru the night. 460 h/s stable when I left.  I really don't understand this at all.  I've tried several versions of claymore miner back down to ver 10. Ver 10 works but what I find is odd with it is it shows the 7970 as algo 2 and the fury using algo 1. No asm in that version.  But when I run ver 12 and up it shows both cards as algo 2.  Uff sucks when ya can't figure out what is the issue. I've spent two whole days now troubleshooting. Anyone have any other trick I can try?  Would be really appreciated.  

BR
d57heinz

Can you change the main display card?

I have done that. Put the 7970 into first pcie and the fury as the second card in pcie slots. I just teamviewed into that rig. So far with it by itself it's been running steady going on 10 hours now.  It's very possible this 7970 has some issue. They are getting pretty old now.  I've had a few go bad in the last month.  So it's possible it's flaking out on me causing issues with the software/rig stability. 

[streetworker]

Once I had this problem (reinstall drivers), too after flashing with other voltage parameters. After flashing to old bios everything was stable again. So probably you have a bios issue somehow.

Another thing I have figured out, when miner switch off or go to zero after a period of time which is always more or less the same amount of time - go and check temperatures. I have to keep all my cards less then 69°C. If cards go above it will cause failures.

Kind regards sworker

[d57heinz]

Once I had this problem (reinstall drivers), too after flashing with other voltage parameters. After flashing to old bios everything was stable again. So probably you have a bios issue somehow.

Another thing I have figured out, when miner switch off or go to zero after a period of time which is always more or less the same amount of time - go and check temperatures. I have to keep all my cards less then 69°C. If cards go above it will cause failures.

Kind regards sworker

Well now you got me thinking. I purchased this fury off eBay.  Maybe I should try finding a bios off the tech site and reflash it.  Temps are actually beautiful. Fan runs at 35% @64c. And that was yesterday at 82f.  This card is huge:). Or at least the heat sink is. It's about 2.5 inch longer than 7970.  It's a sapphire fury 4gb oc. I messaged the guy off eBay. He says it was only used for gaming.  But who knows.  I will try a reflash and see where that puts me. Thanks for the info.

Edit. I'm at 11 hours mining @460 h/s. But only card in system. It's def an issue I've never come across

BR

[pornluver]

I have a rig with 6 RX 480

What should driver should I use?

Sometimes I mine ethash (ethereum). Sometimes I mine equihash (zcash).

Obviously I can't change driver everytime I switch.

What driver should I use that's best for both?

Where can I download both of your miner? I didn't see windows version of the miner in drive link.

[Hoang152]

If you use Claymore miner, try my IOS app to monitor miner.

https://itunes.apple.com/vn/app/clays-more-monitor/id1225812443?mt=8

http://i1124.photobucket.com/albums/l565/MrHoanglee/11_zps0tcp6lpd.jpg

[Trasnadian]

I have a rig with 6 RX 480

What should driver should I use?

Sometimes I mine ethash (ethereum). Sometimes I mine equihash (zcash).

Obviously I can't change driver everytime I switch.

What driver should I use that's best for both?

Where can I download both of your miner? I didn't see windows version of the miner in drive link.

For the ETH and ZEC, you can use the same driver.

[pornluver]

I have a rig with 6 RX 480

What should driver should I use?

Sometimes I mine ethash (ethereum). Sometimes I mine equihash (zcash).

Obviously I can't change driver everytime I switch.

What driver should I use that's best for both?

Where can I download both of your miner? I didn't see windows version of the miner in drive link.

For the ETH and ZEC, you can use the same driver.

Which driver it is?

I believe I install 16.9.1

However, according to device manager, my driver version is 21.19.137.514

I wonder why the numbering.

[RentGPU]

The best drivers i used without issues is 16.9.2 , i installed it on all of my rigs months ago and updated all rigs except one still running on 16.9.2 and it's the best performing between all rigs no problems at all.

[drawer]

How much sol's i can get from radeon r9 390X 8gb