Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux)

[elmotti]

Hi everyone! First of all, I´m newbi so don´t be too harsh with my silli question Has anybody notes a decrease in flypool "rewards" I mean, one week ago an rx470 was giving me like 0.03zcash per day, now i´m getting like 0.02. It is because they doubled the difficulty? or maybe it´s because more and more people is mining zcash now?

[FlensGold]

Hi everyone! First of all, I´m newbi so don´t be too harsh with my silli question Has anybody notes a decrease in flypool "rewards" I mean, one week ago an rx470 was giving me like 0.03zcash per day, now i´m getting like 0.02. It is because they doubled the difficulty? or maybe it´s because more and more people is mining zcash now?

http://www.coinwarz.com/difficulty-charts/zcash-difficulty-chart

[AriesIV10]

What would the bat file/exe file look like?

When my RIG accidentally restarts windows, how should I write the bat file/exe file to start Claymore automatically for 1900 mem and 1300 core?


Does this look right for the bat file:

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100
ZecMiner64.exe -zpool pool -zwal wallet.name -zpsw x -i 6,6,6,6,6,6,6 -mclock 1900 -cclock 1300

How do I get the Rig to start the Claymore file automatically after restarting?

[safonov]

Please share your speeds of  
R9 280X (R7970) 3GB 384 BIT GDDR5
AMD Sapphire R9 280X VaporX Edition
XFX Double Dissipation R9 290 4GB 512 Bits OC

Thanks

280x 195-200

[AltcoinScamfinder]

Anyone have sol/s for R9 Fury 4GB on claymore 8?

[elmotti]

Hi everyone! First of all, I´m newbi so don´t be too harsh with my silli question Has anybody notes a decrease in flypool "rewards" I mean, one week ago an rx470 was giving me like 0.03zcash per day, now i´m getting like 0.02. It is because they doubled the difficulty? or maybe it´s because more and more people is mining zcash now?

http://www.coinwarz.com/difficulty-charts/zcash-difficulty-chart

So, it´s because of the difficulty... thanks mate!

[qqqq]

How do u enable remote management? -mport 3333 dont seem to work?

Fixed issue with "-mport" option (read-only mode). Please re-download v8.0.

I've re-downloaded v8 from Mega and still can't restart a miner with -mport 3333.

I guess he forgot to update mega link, cause 17:04 was when first uploaded. It's strange that nobody noticed about that.

[HardwarePal]

Anyone have sol/s for R9 Fury 4GB on claymore 8?

~280 with -i 6
~275 with -i 3

[elzium]

How do u enable remote management? -mport 3333 dont seem to work?

Fixed issue with "-mport" option (read-only mode). Please re-download v8.0.

I've re-downloaded v8 from Mega and still can't restart a miner with -mport 3333.

I guess he forgot to update mega link, cause 17:04 was when first uploaded. It's strange that nobody noticed about that.

I downloaded it again from mega a minute after that post and its working.

[MrJaekin]

Please share your speeds of  
R9 280X (R7970) 3GB 384 BIT GDDR5
AMD Sapphire R9 280X VaporX Edition
XFX Double Dissipation R9 290 4GB 512 Bits OC

Thanks

R9 290 4GB 230 H/s
All stock

Try 1100 Core and 1125 Mem..  My ref cards do 250-255

Have you raised the memory frequency to 1250? Does it make any difference? I heard the Equihash is memory sensitive.

I did, but it didn't make any difference for me.

[qqqq]

How do u enable remote management? -mport 3333 dont seem to work?

Fixed issue with "-mport" option (read-only mode). Please re-download v8.0.

I've re-downloaded v8 from Mega and still can't restart a miner with -mport 3333.

I guess he forgot to update mega link, cause 17:04 was when first uploaded. It's strange that nobody noticed about that.

I downloaded it again from mega a minute after that post and its working.

I re-downloaded it right now and it's still Remote management (READ-ONLY MODE) is enabled on port 3333.

Sorry it's read-only on default. My fault again))

[mettalmag]

What would the bat file/exe file look like?

When my RIG accidentally restarts windows, how should I write the bat file/exe file to start Claymore automatically for 1900 mem and 1300 core?


Does this look right for the bat file:

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100
ZecMiner64.exe -zpool pool -zwal wallet.name -zpsw x -i 6,6,6,6,6,6,6 -mclock 1900 -cclock 1300

How do I get the Rig to start the Claymore file automatically after restarting?

-i 6 is enough if all cards must run on 6
I think you should add SETX (not startx, sorry) command to all GPU commands
To start miner automatically after restarting create a shortcut of the .bat file on desktop and then add it to windows startup folder (you can find startup folder either in start menu or type in run shell:startup)
For mems and clock I think you should create a profile in wattman tool and save those settings there

[Relaqs]

SSD faster for zcash mining. 16+ gb swap memory for 5 gpu?

[l30z1n]

Guys, I need some help. I have a system with 5 GPUs, and I want to add one more (R9 390) to complete the 6 slots. My whole system is:


-ASROCK H81 PRO BTC
- Intel Celeron G1820
- 8GB RAM

GPUs:

- MSI R9 390 gaming 8G
- MSI R9 290x gaming 4G
- Gigabyte R9 290 reference
- Gigabyte RX 480 8GB refence
- XFX RX 480 8GB double dissipation with 8 pin

PSU:

- Cougar GX800 (holding motherboard and all rises + R9 390 and R9 290X)
- CX 750 (holding R9 290 and both RX 480)

The question is, do I need to upgrade the PSU or are these two already able to get the job done?

*If anyone has any tips on how to redistribute energy between the PSUs. Please, feel free to talk.

[Tom0098]

Definitely ETC + Sia better than Zec currently 

[TheRider]

Guys, I need some help. I have a system with 5 GPUs, and I want to add one more (R9 390) to complete the 6 slots. My whole system is:


-ASROCK H81 PRO BTC
- Intel Celeron G1820
- 8GB RAM

GPUs:

- MSI R9 390 gaming 8G
- MSI R9 290x gaming 4G
- Gigabyte R9 290 reference
- Gigabyte RX 480 8GB refence
- XFX RX 480 8GB double dissipation with 8 pin

PSU:

- Cougar GX800 (holding motherboard and all rises + R9 390 and R9 290X)
- CX 750 (holding R9 290 and both RX 480)

The question is, do I need to upgrade the PSU or are these two already able to get the job done?

*If anyone has any tips on how to redistribute energy between the PSUs. Please, feel free to talk.

Are you already running it with 5 GPUs? Can you give more details regarding BIOS mods, voltage and clock mods? This will help give you more useful advice.

With that setup, I would be leaning toward adding the sixth card (390) under the CX 750 PSU.

Best thing you can do is measure power usage at the wall for each card individually, then do the math to figure out your best possible power distribution.

[drr0ss]

What would the bat file/exe file look like?

When my RIG accidentally restarts windows, how should I write the bat file/exe file to start Claymore automatically for 1900 mem and 1300 core?


Does this look right for the bat file:

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100
ZecMiner64.exe -zpool pool -zwal wallet.name -zpsw x -i 6,6,6,6,6,6,6 -mclock 1900 -cclock 1300

How do I get the Rig to start the Claymore file automatically after restarting?

Put shortcut for .bat or .cmd file with configuration there: Runn=> %programdata%\Microsoft\Windows\Start Menu\Programs\StartUp

This doesn't mean nothing:
GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100

The right settings are:
SET GPU_FORCE_64BIT_PTR=0
SET GPU_MAX_HEAP_SIZE=100
SET GPU_USE_SYNC_OBJECTS=1
SET GPU_MAX_ALLOC_PERCENT=100
SET GPU_SINGLE_ALLOC_PERCENT=100
(for current CMD environment)

or
SETX GPU_FORCE_64BIT_PTR 0
SETX GPU_MAX_HEAP_SIZE 100
SETX GPU_USE_SYNC_OBJECTS 1
SETX GPU_MAX_ALLOC_PERCENT 100
SETX GPU_SINGLE_ALLOC_PERCENT 100
(adding permanet to a registry user env.)

[Simon_Grape]

Guys, I need some help. I have a system with 5 GPUs, and I want to add one more (R9 390) to complete the 6 slots. My whole system is:


-ASROCK H81 PRO BTC
- Intel Celeron G1820
- 8GB RAM

GPUs:

- MSI R9 390 gaming 8G
- MSI R9 290x gaming 4G
- Gigabyte R9 290 reference
- Gigabyte RX 480 8GB refence
- XFX RX 480 8GB double dissipation with 8 pin

PSU:

- Cougar GX800 (holding motherboard and all rises + R9 390 and R9 290X)
- CX 750 (holding R9 290 and both RX 480)

The question is, do I need to upgrade the PSU or are these two already able to get the job done?

*If anyone has any tips on how to redistribute energy between the PSUs. Please, feel free to talk.

Depends on your watt usage - looks like it you have enough power between both your PSU's - I'd put your Mobo and 2 GPU's on the 750W and then power the the 4 remaining GPU's with the 800. If $$ is not an issue the I'd get new Gold or better 1300W to 1600W.

[AriesIV10]

What would the bat file/exe file look like?

When my RIG accidentally restarts windows, how should I write the bat file/exe file to start Claymore automatically for 1900 mem and 1300 core?


Does this look right for the bat file:

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100
ZecMiner64.exe -zpool pool -zwal wallet.name -zpsw x -i 6,6,6,6,6,6,6 -mclock 1900 -cclock 1300

How do I get the Rig to start the Claymore file automatically after restarting?

Put shortcut for .bat or .cmd file with configuration there: Runn=> %programdata%\Microsoft\Windows\Start Menu\Programs\StartUp

This doesn't mean nothing:
GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100

The right settings are:
SET GPU_FORCE_64BIT_PTR=0
SET GPU_MAX_HEAP_SIZE=100
SET GPU_USE_SYNC_OBJECTS=1
SET GPU_MAX_ALLOC_PERCENT=100
SET GPU_SINGLE_ALLOC_PERCENT=100
(for current CMD environment)

or
SETX GPU_FORCE_64BIT_PTR 0
SETX GPU_MAX_HEAP_SIZE 100
SETX GPU_USE_SYNC_OBJECTS 1
SETX GPU_MAX_ALLOC_PERCENT 100
SETX GPU_SINGLE_ALLOC_PERCENT 100
(adding permanet to a registry user env.)

Cool!  Here is what I am understanding for the bat file:

SETX GPU_FORCE_64BIT_PTR 0
SETX GPU_MAX_HEAP_SIZE 100
SETX GPU_USE_SYNC_OBJECTS 1
SETX GPU_MAX_ALLOC_PERCENT 100
SETX GPU_SINGLE_ALLOC_PERCENT 100
ZecMiner64.exe -zpool us1-zcash.flypool.org:3333 -zwal t1RqoKSrBQ3ML2NsXwcvGR2KWheek3Q7dR2.name -zpsw x -i 6 -mclock 1900 -cclock 1300

I am thinking that adding this would get the mem and core set to what I want the gpu's to run at the appropriate frequency.  I normally use afterburner to set these, but in a loss of power situation I am not there: -mclock 1900 -cclock 1300 "should" work?

I am also adding a shortcut to the bat file in the windows startup to start the bat file if the computer should have a power outage.   

Does this look good?

[Simon_Grape]

Hey Claymore, ever since I've started to use the new v8, I've been facing many crashes while using Photoshop or any other such software. It's really annoying and I've tried all the possible intensities as well as other overclocking stuff, but unable to fix it. One thing I've done along the usage of your new version is the driver update. Do you think that it could be happening because of the new driver version of Crimson or is it any known issue of your new miner's version?

Using RX 480's by the way...

Dude, you can't mine and use photoshop on the same GPU at the same time. It's one or the other.