ghostfaceuk
|
|
November 24, 2016, 04:41:33 PM |
|
For those, who need comparison data and inerested in Claymore miner progress GPU v8 v7 v6 v5 v4 v3 v2 7870 110 95 65 55 40 35 32 7950 180 155 125 95 70 45 38 7970 200 165 120 95 65 55 48 270x 115 100 67 55 40 35 32 280x 200 165 125 90 65 60 51 285 125 110 85 70 40 36 32 RX 470 4Gb 175 155 145 120 70 60 50 Could you share RX 470 config. Mine just 152 on V8. What level -i are you using and are you using the -nofee switch? I can get 170h/s with fee enable and about 158 with the fee switched off using -i6.
|
|
|
|
megaplage
Member
Offline
Activity: 320
Merit: 10
|
|
November 24, 2016, 04:43:29 PM |
|
Thanks Claymore I have four cards. three card give roughly 160-180. but one card give 45 h/s. All the cards are 480 4gb and 8gb. I swipe the riser but did not help. Any idea Thanks,
Get GPU-Z and look at clockspeeds of cards. Sometimes a card won't properly ramp up clocks under load if there are no monitors plugged in. You can also get an HDMI display emulator off Amazon for $15. I see people recommending the display emulators and was wondering if the end of a cheap hdmi wire would suffice? I can pick one up for £1 and that would give me two ends to effectively plug in. does not work as intented ... you need an edid simulation for the card to recognize a 'display'
|
|
|
|
lseder
Newbie
Offline
Activity: 4
Merit: 0
|
|
November 24, 2016, 04:43:56 PM |
|
Thanks Claymore I have four cards. three card give roughly 160-180. but one card give 45 h/s. All the cards are 480 4gb and 8gb. I swipe the riser but did not help. Any idea Thanks,
Try different amd driver version.
|
|
|
|
IOTUSA
|
|
November 24, 2016, 04:44:22 PM |
|
Ok good , now stop .
Work on Nvidia .
Nvidia architecture is almost always inferior to AMD when it comes to mining. Also no real reason to develop a miner or optimize it for maybe 10% of the market of mining equipment.
|
|
|
|
ghostfaceuk
|
|
November 24, 2016, 04:44:54 PM |
|
Thanks Claymore I have four cards. three card give roughly 160-180. but one card give 45 h/s. All the cards are 480 4gb and 8gb. I swipe the riser but did not help. Any idea Thanks,
Get GPU-Z and look at clockspeeds of cards. Sometimes a card won't properly ramp up clocks under load if there are no monitors plugged in. You can also get an HDMI display emulator off Amazon for $15. I see people recommending the display emulators and was wondering if the end of a cheap hdmi wire would suffice? I can pick one up for £1 and that would give me two ends to effectively plug in. does not work as intented ... you need an edid simulation for the card to recognize a 'display' ah thanks, just wondered if I could cut the costs a little if I encountered this problem
|
|
|
|
auctioneeeeer
|
|
November 24, 2016, 04:45:28 PM |
|
For those, who need comparison data and inerested in Claymore miner progress GPU v8 v7 v6 v5 v4 v3 v2 7870 110 95 65 55 40 35 32 7950 180 155 125 95 70 45 38 7970 200 165 120 95 65 55 48 270x 115 100 67 55 40 35 32 280x 200 165 125 90 65 60 51 285 125 110 85 70 40 36 32 RX 470 4Gb 175 155 145 120 70 60 50 Could you share RX 470 config. Mine just 152 on V8. What level -i are you using and are you using the -nofee switch? I can get 170h/s with fee enable and about 158 with the fee switched off using -i6. Anyone in their right mind would not use the -nofee option, it's slower than with the fee......
|
|
|
|
johny78
Newbie
Offline
Activity: 37
Merit: 0
|
|
November 24, 2016, 04:46:36 PM |
|
5x rx 480 4gb underclocked ~140 h/s each ~700h/s // 430W at the wall Thank you claymore
|
|
|
|
Hotmetal
|
|
November 24, 2016, 04:48:01 PM |
|
please release a linux version. you could even take a higer devfee.
optimier is not as good as your miners
A Linux version is probably not on the near horizon as he has stated he does not like Linux.
|
|
|
|
ghostfaceuk
|
|
November 24, 2016, 04:50:31 PM |
|
For those, who need comparison data and inerested in Claymore miner progress GPU v8 v7 v6 v5 v4 v3 v2 7870 110 95 65 55 40 35 32 7950 180 155 125 95 70 45 38 7970 200 165 120 95 65 55 48 270x 115 100 67 55 40 35 32 280x 200 165 125 90 65 60 51 285 125 110 85 70 40 36 32 RX 470 4Gb 175 155 145 120 70 60 50 Could you share RX 470 config. Mine just 152 on V8. What level -i are you using and are you using the -nofee switch? I can get 170h/s with fee enable and about 158 with the fee switched off using -i6. Anyone in their right mind would not use the -nofee option, it's slower than with the fee...... I agree but just wanted to check the speed difference.
|
|
|
|
toptek
Legendary
Offline
Activity: 1274
Merit: 1000
|
|
November 24, 2016, 04:59:10 PM Last edit: November 24, 2016, 05:10:48 PM by toptek |
|
please release a linux version. you could even take a higer devfee.
optimier is not as good as your miners
A Linux version is probably not on the near horizon as he has stated he does not like Linux. one reason is you need Ubuntu 16 to run these cards at there best, the problem and that's on AMD some cards still don't have AMDPROGPU drivers support for Ubuntu 16 once they do we will probable see a Linux version of CM . and it's not worth it to run two different version of CM in Linux form one with Ubuntu 16 and one with Ubuntu 14 , I'm sure he would use 14 over 15 i wouldn't, i would use 15 it seems more stable then 14 but that's me, all because of AMD driver support while the windows drivers support all cards and windows version but a few that no long have a use or are actually sold as new and may be no win xp support. I don't care much for Linux either ,windows is so much easier to use . but I do like to use Linux on PI type PC over the windows version for PI type PC.
|
|
|
|
Kuzma777
Newbie
Offline
Activity: 1
Merit: 0
|
|
November 24, 2016, 05:01:56 PM |
|
Good day. Over which version of miners now you're working on?
|
|
|
|
Mr047
Newbie
Offline
Activity: 14
Merit: 0
|
|
November 24, 2016, 05:03:45 PM |
|
For those, who need comparison data and inerested in Claymore miner progress vX - version of Zcash miner GPU v8 v7 v6 v5 v4 v3 v2 7870 110 95 65 55 40 35 32 7950 180 155 125 95 70 45 38 7970 200 165 120 95 65 55 48 270x 115 100 67 55 40 35 32 280x 200 165 125 90 65 60 51 285 125 110 85 70 40 36 32 RX 470 4Gb 175 155 145 120 70 60 50 Could you share RX 470 config. Mine just 152 on V8. What level -i are you using and are you using the -nofee switch? I can get 170h/s with fee enable and about 158 with the fee switched off using -i6. Anyone in their right mind would not use the -nofee option, it's slower than with the fee...... I agree but just wanted to check the speed difference. NO additional settings exept pool, -tt and -mport Different Vendors (Gigabyte, Powercolor, ASUS) all stock, but BIOS mod timings (was done for ETH). P.S. That feeling when you accidentally post message while editing it, fix errors, but people start quoting unedited message. So you quote their message and fix your quote text in their quote
|
|
|
|
ghostfaceuk
|
|
November 24, 2016, 05:06:13 PM |
|
For those, who need comparison data and inerested in Claymore miner progress vX - version of Zcash miner GPU v8 v7 v6 v5 v4 v3 v2 7870 110 95 65 55 40 35 32 7950 180 155 125 95 70 45 38 7970 200 165 120 95 65 55 48 270x 115 100 67 55 40 35 32 280x 200 165 125 90 65 60 51 285 125 110 85 70 40 36 32 RX 470 4Gb 175 155 145 120 70 60 50 Could you share RX 470 config. Mine just 152 on V8. What level -i are you using and are you using the -nofee switch? I can get 170h/s with fee enable and about 158 with the fee switched off using -i6. Anyone in their right mind would not use the -nofee option, it's slower than with the fee...... I agree but just wanted to check the speed difference. NO additional settings exept pool, -tt and -mport Different Vendors (Gigabyte, Powercolor, ASUS) all stock, but BIOS mod timings (was done for ETH). P.S. That feeling when you accidentally post message while editing it, fix errors, but people start quoting unedited message I wonder if its your ETH bios settings.
|
|
|
|
Mr047
Newbie
Offline
Activity: 14
Merit: 0
|
|
November 24, 2016, 05:10:31 PM |
|
I wonder if its your ETH bios settings.
I edited original stock BIOS of each card with timings, so ALL setting are stock (~1200 core/ 6600 memory).
|
|
|
|
Hotmetal
|
|
November 24, 2016, 05:17:24 PM |
|
Have to love v8: (6 x RX480s)
|
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
|
November 24, 2016, 05:23:05 PM Last edit: November 24, 2016, 05:57:20 PM by citronick |
|
Bravo Claymore!
v8 now gives me R9 390 = 270 H/s per card!
Updates:
R9 290 = 268 H/s
R9 290x = 278 H/s
RX 480 = 172 H/s
R9 Nano = 278 H/s
R7 370 = 110 H/s
|
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
AriesIV10
Legendary
Offline
Activity: 1260
Merit: 1006
Mine for a Bit
|
|
November 24, 2016, 05:29:14 PM |
|
Getting 1320 H/s with my RX 470 rig.
GREAT V8.0 Claymore!
|
|
|
|
forato
|
|
November 24, 2016, 05:30:53 PM |
|
Have to love v8: (6 x RX480s) where did you get this grafic?
|
|
|
|
sorry2xs
Legendary
Offline
Activity: 924
Merit: 1000
Dark Passenger Bitcoin miner 2013,Bitcoin node
|
|
November 24, 2016, 05:32:50 PM |
|
|
Please tip the Node 1MPWKB23NsZsXHANnFwVAWT86mL24fqAjF; KO4UX THAT NO GOOD DO GOODER BAT!!!
|
|
|
d57heinz
Legendary
Offline
Activity: 1453
Merit: 1011
Bitcoin Talks Bullshit Walks
|
|
November 24, 2016, 05:44:23 PM |
|
Breaking 305 h/s on my xfx 390x's. It's the 1060mhz 8gb ones. I do have something odd happen on some rigs. Tahitis with3gb ram. Some will do intensity 6 some say not enough ram setting intensity 5. I've ran the usual setx commands. Not really an issue persay. Overall excellent improvements. Thanks claymore Edit. Figured it out. Those rigs that set intensity 5 on tahiti 3gb have the dummy plug in them. So I assume it uses a bit too much ram for display purposes. BR
|
As in nature, all is ebb and tide, all is wave motion, so it seems that in all branches of industry, alternating currents - electric wave motion - will have the sway. ~Nikola Tesla~
|
|
|
|