Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux)

[IOTUSA]

Bravo Claymore!

v8 now gives me R9 390 = 270 H/s per card!

Updates:

R9 290 = 268 H/s

R9 290x = 278 H/s

RX 480 = 172 H/s

Can you provide some power consumption data for 290/290x/390? Per card or rig.

[1715060250]

1715060250

[1715060250]

1715060250

[bmtrader]

someone with electricity info zec/eth?

[TheChief5055]

Bravo Claymore!

v8 now gives me R9 390 = 270 H/s per card!

Updates:

RX 480 = 172 H/s

2*200 H/s from both RX480's (reference and Gigabyte G1). Stock GPU freq/voltage, 2100Mhz / "1750->2000" strap RAM. So far so good.

[ravikiranb1985]

Hello Claymore


Please improve support to 16.x amd cards Thank you in advance


thank you
regards

[citronick]

Bravo Claymore!

v8 now gives me R9 390 = 270 H/s per card!

Updates:

R9 290 = 268 H/s

R9 290x = 278 H/s

RX 480 = 172 H/s

R9 Nano = 278 H/s

R7 370 = 110 H/s

Can you provide some power consumption data for 290/290x/390? Per card or rig.

the rigs are offsite - will post when I access them tomorrow morning.

I updated remotely all the rigs that are with 1600w PSUs = 7x 370s, 5 x 390s, 6 x Nanos, and 6 x 480s.

With CDM v7.4, these rigs are mining ETH full speed, ethi 16 and nearly 80-85% of PSU.

But with CZM v7, these rigs are well under 65-70% of PSU.

Hope the CZM v8 doesnt reach CDM power draw because CZM runs with less heat and significantly lower power -  and all these good points will be neutralised when CZM v8 equals CDM v7.4 powerdraw.

[Walrusbonzo]

Pulling 1560w to get just over 1800 sol/s on my 290x rig

[Walrusbonzo]

Hello Claymore


Please improve support to 16.x amd cards Thank you in advance


thank you
regards

In what way? i'm using 16.11.x across all my RX480 and 290x and Claymore miner works great.

[rpg]

Fyi xfx 480 8gig for $184 at Newegg when paid with amex

[_javi_]

i just burned a small psu in a rig with 8.0 which was fine with 7.0 (i knew it was at the brink of its capabilities).
No regrets.. it was an old one.

but beware: Definatly usage power increase in this version.

[sorry2xs]

Bravo Claymore!

v8 now gives me R9 390 = 270 H/s per card!

Updates:

R9 290 = 268 H/s

R9 290x = 278 H/s

RX 480 = 172 H/s

R9 Nano = 278 H/s

R7 370 = 110 H/s

Can you provide some power consumption data for 290/290x/390? Per card or rig.

the rigs are offsite - will post when I access them tomorrow morning.

I updated remotely all the rigs that are with 1600w PSUs = 7x 370s, 5 x 390s, 6 x Nanos, and 6 x 480s.

With CDM v7.4, these rigs are mining ETH full speed, ethi 16 and nearly 80-85% of PSU.

But with CZM v7, these rigs are well under 65-70% of PSU.

Hope the CZM v8 doesnt reach CDM power draw because CZM runs with less heat and significantly lower power -  and all these good points will be neutralised when CZM v8 equals CDM v7.4 powerdraw.

5x 390,5x480,2x7950s 3 psus total watts 3300 all on a single 240 volts ac circuit 12.5 amps= 3000 watts total hashrate 2.8 Kh/s 

[Hotmetal]

Have to love v8: (6 x RX480s)

where did you get this grafic?

I built an API layer that allows me to switch between whatever (gpu) coin is (currently) the most profitable automatically.
The graphing is just a "nice to look at". I wouldn't mind people using it but I suspect it will land up being DDOS'd rather quickly.

[Havane]

Sometimes  after few hours or days, with Claymore V7 or V8, One fan of my 6 RX 480 RIG, goes up to 95%, instead of 60%. A reboot solve the problem. Do you know why ?

[batko]

Sometimes  after few hours or days, with Claymore V7 or V8, One fan of my 6 RX 480 RIG, goes up to 95%, instead of 60%. A reboot solve the problem. Do you know why ?

same problem, i have 2 Rigs 5x480 Nitro, and 4x480 Nitro sometimes fan up to 100%, reboot solve problem.

[Heatspeed]

Each rx 480 nitro gets about 195 H/S

~ 1.2 H/s/Watt

Execpt GPU 0 is always a bit higher like +5% than the other GPUs

Anybody know why?

Maybe because the monitor is plugged in there?

[vi1son]

Wow! My old 7850 gives 91H/s now/. 

[HardwarePal]

Sometimes  after few hours or days, with Claymore V7 or V8, One fan of my 6 RX 480 RIG, goes up to 95%, instead of 60%. A reboot solve the problem. Do you know why ?

same problem, i have 2 Rigs 5x480 Nitro, and 4x480 Nitro sometimes fan up to 100%, reboot solve problem.

99% a riser problem

[Eisenkopf89]

My Fury X have about 310H/s 😁

[_javi_]

Do you realize that we are all rising the hashrate, rising the diff, and then earning the same as before??

[auctioneeeeer]

Do you realize that we are all rising the hashrate, rising the diff, and then earning the same as before??

It's been said many times before, but we're also drowning out the CPUs aka botnets by making GPUs more faster.

[Heatspeed]

Do you realize that we are all rising the hashrate, rising the diff, and then earning the same as before??

Exept linux unsers