stoleyourburger
Newbie
 Offline
Activity: 15
Merit: 0
|
 |
November 30, 2016, 10:02:44 AM |
|
Might be a bad riser.
or the riser is loose or .. are the lanes set to gen2? is there a 16x configuration setup like 8x4x4x? definetly dont leave any of those settings on auto or the drivers are getting mixed up, might want to try DDU uninstall and reinstall drivers if nothing else works The lanes are set to gen2 yeah . I have gen 1 and gen 2 should i switch to gen1 ? Can you tell me more about this settings ? To be honest everything is stock and auto. It`s strange that everything works well for 30 mins sometimes 1 hour sometimes 2 hours than boom...i get that error and pc freezes ! Thank you for the helping response Mentioning a loose riser.. I had a 4 days uptime on one miner with x1-x16 risers. Then suddenly the miner froze, but I could ping the PC, though couldn't connect to it through RDP, Teamviewer or VNC... So when I got to my miner physically, I saw one riser loose, a couple millimeters out from the motherboard. I guess it could be bad riser + vibration (very strange, but that's my only guess) or maybe some ghost  Seriously, I had a thought that riser was springly (elastic) and maybe because of environment (temp, vibration) it took itself a little out. Btw what gen1/gen2 you are talking about? |
|
|
|
|
Klaasje
Legendary
Offline
Activity: 1080
Merit: 1000
BTC - 14ZVqS5UGqhY77d5u9aUSW24ipRJ2g9wmm
|
|
November 30, 2016, 10:09:09 AM |
|
Hello guys. I just started configuring my first rig. I have 4 RX 470 gpus . It works just fine until i get this error :
WATCHDOG: GPU 2 hangs in OpenCL call, exit .
After that it tries to restart the system but actualy freeze it. I have 1200 PSU so power shouldn`t be a problem
Any idea what it can cause this ? I have enough virtual memory set. The Gpus are not modded or anything . Just stock
There seems to be a problem with atikmdag.sys Fail . I have 16 gb of Virtual Memory
i had the same problem changed my RAM memory all fixed  |
Bitcoin - 14ZVqS5UGqhY77d5u9aUSW24ipRJ2g9wmm
|
|
|
z97rx470
Newbie
Offline
Activity: 36
Merit: 0
|
|
November 30, 2016, 10:13:07 AM
Last edit: November 30, 2016, 10:25:37 AM by z97rx470 |
|
Hello guys. I just started configuring my first rig. I have 4 RX 470 gpus . It works just fine until i get this error :
WATCHDOG: GPU 2 hangs in OpenCL call, exit .
After that it tries to restart the system but actualy freeze it. I have 1200 PSU so power shouldn`t be a problem
Any idea what it can cause this ? I have enough virtual memory set. The Gpus are not modded or anything . Just stock
There seems to be a problem with atikmdag.sys Fail . I have 16 gb of Virtual Memory
i had the same problem changed my RAM memory all fixed Thanks for the tip will try tomorrow |
|
|
|
|
|
|
|
Altcoining
|
|
November 30, 2016, 11:06:14 AM |
|
Hashing Speed: 900H/s Hashing Algorithm: Equihash Power Consumption: 980 Watts That's 1.1 watts per S/s, that is extremely high... |
|
|
|
|
|
Ursul0
|
|
November 30, 2016, 11:08:23 AM |
|
looks like bs to me. also do the calculations - 900H/s = 5*rx480, 120W*5 = 600W, 250$*5 = 1250$... WHY?  |
|
|
|
|
|
dzonikg28
|
|
November 30, 2016, 11:17:21 AM |
|
Yes but its just first ..remeber for LTC..first ASIC were laughable but then in just few months ASIC evolved and made GPYs obsolete
|
|
|
|
|
Hotmetal
|
|
November 30, 2016, 11:25:55 AM |
|
Yes but its just first ..remeber for LTC..first ASIC were laughable but then in just few months ASIC evolved and made GPYs obsolete
Don't count on that happening any time soon. ETH mining has been around forever and it doesn't have a ASIC for it. Edit: looks like i was wrong |
|
|
|
|
Masked_Immortal
Member
Offline
Activity: 67
Merit: 10
|
|
November 30, 2016, 11:27:15 AM |
|
they also offer eth miner, look at their product pictures it seems it has dvd rom and floppy drive also, good  |
|
|
|
Kimax
Newbie
Offline
Activity: 33
Merit: 0
|
|
November 30, 2016, 11:29:19 AM |
|
looks like bs to me. also do the calculations - 900H/s = 5*rx480, 120W*5 = 600W, 250$*5 = 1250$... WHY? A single Radeon Pro Duo produce 1000 H/s and uses 300W It cost about 1200 USD here in Denmark |
|
|
|
|
wulfgar_1979
Newbie
Offline
Activity: 30
Merit: 0
|
|
November 30, 2016, 11:37:42 AM |
|
please don't stop development!!!
|
|
|
|
|
|
cptfisher
|
|
November 30, 2016, 11:38:44 AM |
|
who tested radeon pro duo ? do they really do 1k ?
|
|
|
|
|
|
Altcoining
|
|
November 30, 2016, 11:39:58 AM |
|
they also offer eth miner, look at their product pictures it seems it has dvd rom and floppy drive also, good A uhm... F... fLOPPY DRIVE? |
|
|
|
|
yatta
Member
Offline
Activity: 93
Merit: 10
|
|
November 30, 2016, 11:41:43 AM |
|
looks like bs to me. also do the calculations - 900H/s = 5*rx480, 120W*5 = 600W, 250$*5 = 1250$... WHY? A single Radeon Pro Duo produce 1000 H/s and uses 300W It cost about 1200 USD here in Denmark Any proof ? |
ETH 0xe3c8d2587e03ac3bdcb86794b8227c000db54d25
|
|
|
christiano88
Member
Offline
Activity: 161
Merit: 10
|
|
November 30, 2016, 11:43:47 AM |
|
The Pro Duo cannot do 1kh/s, it's practically 2x R9 nano, one nano does 250, if I remember correctly or around that mark.
|
|
|
|
|
|
cptfisher
|
|
November 30, 2016, 11:45:51 AM |
|
if i am correct pro duo should be 2 x FURY X if i am correct... i guess they can be pushed to 6 -700 sols not more... but there is this rumor ... so i am just asking
|
|
|
|
|
|
Demarsac
|
|
November 30, 2016, 11:52:51 AM |
|
looks like bs to me. also do the calculations - 900H/s = 5*rx480, 120W*5 = 600W, 250$*5 = 1250$... WHY? A single Radeon Pro Duo produce 1000 H/s and uses 300W It cost about 1200 USD here in Denmark Guys don't forget cost for PSU, CPU, RAM, MOBO, RISERS, CASE This Zcash-Equinox is not a bad start for someone that has no idea regarding mining It has other problems sure but the ratio Hashing/Cost is not far from a RIG with x5 480's |
|
|
|
|
chup
Sr. Member
Offline
Activity: 736
Merit: 262
Me, Myself & I
|
 |
November 30, 2016, 11:56:52 AM |
|
Dead would be only the money You spend on UFOs... |
|
|
|
IojkinKot
Newbie
Offline
Activity: 63
Merit: 0
|
|
November 30, 2016, 11:57:08 AM |
|
It is fake and scam! Don't pay your BTC to these fraudsters! |
|
|
|
|
christiano88
Member
Offline
Activity: 161
Merit: 10
|
|
November 30, 2016, 12:07:38 PM |
|
if i am correct pro duo should be 2 x FURY X if i am correct... i guess they can be pushed to 6 -700 sols not more... but there is this rumor ... so i am just asking
It's based on R9 Nano, not Fury X, else it wouldn't be able to pull only 350w, 2x Fury X will do 550w. And I think Vega that will be released next year will be based on R9 Nano + 14/16nm process, it will be so kickass, especially for mining. |
|
|
|
|
|
