Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux)

[Ursul0]

640W off the wall (modded 470*4 + stock 370):



umm... I upped the voltage a bit, so this one is the actual 640W:

[1714016253]

1714016253

[786sam]

Im getting 1280 sol/s @ 665 watts at wall so that equates to 1280/665 = 1.92 sols per watt with r9 nano x4 underclocked and undervolted....
If i power them up as standard it works out at 1380 sols @ 775 watts at wall which works out 1.72 sols per watt!
So the way forward seems to be undervolting and underclocking if your electricity prices are costing you a pretty penny

[fredeq]

So it seems whattomine gives lower hashrates for a RX470-4gb.
Can anyone post his current 470 hashrate + power consumption with V10 please?

Updated today to 220@110W.
With extra tweaking maybe 10-20 would be possible. Depends how high your core can go and still stay around 0.9V

[Etherion]

For the last couple of weeks, I have noticed that my 8 GPUs rig is submitting about 300 less sol/s than what it is reporting.



the rig detials
Claymore 10v for the lats 16h but 9.3 before for several days ect
windows 10
amd driver 16.11.3. I don't overclock at all

AMD Cards available: 8
GPU #0: Tahiti, 3072 MB available, 32 compute units
GPU #0 recognized as Radeon 280X/380X
GPU #1: Tahiti, 3072 MB available, 32 compute units
GPU #1 recognized as Radeon 280X/380X
GPU #2: Tahiti, 3072 MB available, 32 compute units
GPU #2 recognized as Radeon 280X/380X
GPU #3: Tahiti, 3072 MB available, 32 compute units
GPU #3 recognized as Radeon 280X/380X
GPU #4: Tahiti, 3072 MB available, 32 compute units
GPU #4 recognized as Radeon 280X/380X
GPU #5: Hawaii, 8192 MB available, 44 compute units
GPU #5 recognized as Radeon 390X
GPU #6: Hawaii, 8192 MB available, 44 compute units
GPU #6 recognized as Radeon 390X
GPU #7: Hawaii, 8192 MB available, 40 compute units
GPU #7 recognized as Radeon 390

The 280x/380x are hd7970 but it does not seems to have any negative effect.

[clipto]

So it seems whattomine gives lower hashrates for a RX470-4gb.
Can anyone post his current 470 hashrate + power consumption with V10 please?

Updated today to 220@110W.
With extra tweaking maybe 10-20 would be possible. Depends how high your core can go and still stay around 0.9V

Yeah I've seen it now, thanks for updating.
Just changed my scriptings. 

[Golku]

One of my rig is acting weird

I did mine a couple of days without problem
rebooted it and then the problem has started

When I start the miner I see thaty 480 4gb show as 3gb at the beginning of the miner and then it just closes without any error message

Someone familiar with this problem?

[jddebug]

Anyone using 7970's. What are you finding for the best Algorithm? What hashrate are you seeing?

I'm getting about 890H/s with 4 7970's using a2 i8. With a single 7090 I get 223H/s with a2 i8.

Thanks

[djtim_aust]

Hi all wanting to use 7990 and RX 470 in same rig. Had issues with ethereum mining with this combo and using the 16 drivers, this resulted in the 7990 hash rate dropping significantly by around 50%.
Is it possible with any of the newer drivers to pair these two together without sacrificing hash rates on either of them, if so what drivers are recommended?

[rpg]

Hi all wanting to use 7990 and RX 470 in same rig. Had issues with ethereum mining with this combo and using the 16 drivers, this resulted in the 7990 hash rate dropping significantly by around 50%.
Is it possible with any of the newer drivers to pair these two together without sacrificing hash rates on either of them, if so what drivers are recommended?

when a card hits the max temperature - 1 it will drop the clock until it finds the sweet spot where the temperature is not raising further. Manually increase the fan such as the temp is well bellow the max temperature.Also keep the 7990 on the right side of the 70

[mafaz]

V 10 ...rx 470 4gb

243h/s

what are your setting? I only get 233 h/s for sapphire rx 470 4gb

Gpu clock

1250

memory clock

1750

-75mv

245h/s

MY mined zcash in this pool...best pool in my idea

This link SING IN in pool

https://minergate.com/a/e172e848728edd0d2b97b9b5

what does -75mv do? do cards save power or the heat they produce is lower?

[JJ12880]

Hi all wanting to use 7990 and RX 470 in same rig. Had issues with ethereum mining with this combo and using the 16 drivers, this resulted in the 7990 hash rate dropping significantly by around 50%.
Is it possible with any of the newer drivers to pair these two together without sacrificing hash rates on either of them, if so what drivers are recommended?

I tried to run 7990s and 480x on the same rig, and it will "work" but its not very stable. Id use two rigs if possible. The older 79xx cards like the 15.12 drivers, but these drivers wont detect my 480's ( and probably the 470's).

JJ

[apolousm]

For the last couple of weeks, I have noticed that my 8 GPUs rig is submitting about 300 less sol/s than what it is reporting.



the rig detials
Claymore 10v for the lats 16h but 9.3 before for several days ect
windows 10
amd driver 16.11.3. I don't overclock at all

AMD Cards available: 8
GPU #0: Tahiti, 3072 MB available, 32 compute units
GPU #0 recognized as Radeon 280X/380X
GPU #1: Tahiti, 3072 MB available, 32 compute units
GPU #1 recognized as Radeon 280X/380X
GPU #2: Tahiti, 3072 MB available, 32 compute units
GPU #2 recognized as Radeon 280X/380X
GPU #3: Tahiti, 3072 MB available, 32 compute units
GPU #3 recognized as Radeon 280X/380X
GPU #4: Tahiti, 3072 MB available, 32 compute units
GPU #4 recognized as Radeon 280X/380X
GPU #5: Hawaii, 8192 MB available, 44 compute units
GPU #5 recognized as Radeon 390X
GPU #6: Hawaii, 8192 MB available, 44 compute units
GPU #6 recognized as Radeon 390X
GPU #7: Hawaii, 8192 MB available, 40 compute units
GPU #7 recognized as Radeon 390

The 280x/380x are hd7970 but it does not seems to have any negative effect.

Bro, how did you manage to connect 8 AMD GPU's on Windows 10?

Thank you in advance for your response.

Have a great day.

[kev7112001]

Hi all wanting to use 7990 and RX 470 in same rig. Had issues with ethereum mining with this combo and using the 16 drivers, this resulted in the 7990 hash rate dropping significantly by around 50%.
Is it possible with any of the newer drivers to pair these two together without sacrificing hash rates on either of them, if so what drivers are recommended?

I tried to run 7990s and 480x on the same rig, and it will "work" but its not very stable. Id use two rigs if possible. The older 79xx cards like the 15.12 drivers, but these drivers wont detect my 480's ( and probably the 470's).

JJ

when u run cards like that in same rig u have to try diff configurations in card order also try 15.x drivers my case drivers dont make much difference i been running 1 rig with 7970 with a 290x with 14.12 7970 is at 267 v10 290 is at 335 v9.3 as 9.3 is better 4 290/390 atm

with your type i just set a guys r480 with 2 290x's it didnt like the rx480 in 2nd or last but 1st pcie slot just depends on the rig(mobo)as this was on a rig that wasnt cross x compatible was a old q9550 rig

[mirny]

what is wrong with my 280X?

seems 280x beats rx 480 again? LOL!

What miner do you use?

omg, I cry. I don't believe what I'm reading here...

[BenCodie]

Hi all wanting to use 7990 and RX 470 in same rig. Had issues with ethereum mining with this combo and using the 16 drivers, this resulted in the 7990 hash rate dropping significantly by around 50%.
Is it possible with any of the newer drivers to pair these two together without sacrificing hash rates on either of them, if so what drivers are recommended?

I tried to run 7990s and 480x on the same rig, and it will "work" but its not very stable. Id use two rigs if possible. The older 79xx cards like the 15.12 drivers, but these drivers wont detect my 480's ( and probably the 470's).

JJ

15.12 drivers are not for Rx series
use 16.9.2 drivers
i am sure you are good to go with 16.9.2

[BenCodie]

For the last couple of weeks, I have noticed that my 8 GPUs rig is submitting about 300 less sol/s than what it is reporting.



the rig detials
Claymore 10v for the lats 16h but 9.3 before for several days ect
windows 10
amd driver 16.11.3. I don't overclock at all

AMD Cards available: 8
GPU #0: Tahiti, 3072 MB available, 32 compute units
GPU #0 recognized as Radeon 280X/380X
GPU #1: Tahiti, 3072 MB available, 32 compute units
GPU #1 recognized as Radeon 280X/380X
GPU #2: Tahiti, 3072 MB available, 32 compute units
GPU #2 recognized as Radeon 280X/380X
GPU #3: Tahiti, 3072 MB available, 32 compute units
GPU #3 recognized as Radeon 280X/380X
GPU #4: Tahiti, 3072 MB available, 32 compute units
GPU #4 recognized as Radeon 280X/380X
GPU #5: Hawaii, 8192 MB available, 44 compute units
GPU #5 recognized as Radeon 390X
GPU #6: Hawaii, 8192 MB available, 44 compute units
GPU #6 recognized as Radeon 390X
GPU #7: Hawaii, 8192 MB available, 40 compute units
GPU #7 recognized as Radeon 390

The 280x/380x are hd7970 but it does not seems to have any negative effect.

Bro, how did you manage to connect 8 AMD GPU's on Windows 10?

Thank you in advance for your response.

Have a great day.

He have dual GPUs in one card
used one pcie slot for one card = 2GPUs

[kev7112001]

not true u can install 8 separate cards if u have 8 slots

[Smokescreen]

Hi using claymore zec 10. It crashes my rig other version seem to still work anyone had this happen? Rig is 2 280x and 1 370. Drivers 16.6 windows 10. Also use ddu and go with 15.12?

[Etherion]

For the last couple of weeks, I have noticed that my 8 GPUs rig is submitting about 300 less sol/s than what it is reporting.



the rig detials
Claymore 10v for the lats 16h but 9.3 before for several days ect
windows 10
amd driver 16.11.3. I don't overclock at all

AMD Cards available: 8
GPU #0: Tahiti, 3072 MB available, 32 compute units
GPU #0 recognized as Radeon 280X/380X
GPU #1: Tahiti, 3072 MB available, 32 compute units
GPU #1 recognized as Radeon 280X/380X
GPU #2: Tahiti, 3072 MB available, 32 compute units
GPU #2 recognized as Radeon 280X/380X
GPU #3: Tahiti, 3072 MB available, 32 compute units
GPU #3 recognized as Radeon 280X/380X
GPU #4: Tahiti, 3072 MB available, 32 compute units
GPU #4 recognized as Radeon 280X/380X
GPU #5: Hawaii, 8192 MB available, 44 compute units
GPU #5 recognized as Radeon 390X
GPU #6: Hawaii, 8192 MB available, 44 compute units
GPU #6 recognized as Radeon 390X
GPU #7: Hawaii, 8192 MB available, 40 compute units
GPU #7 recognized as Radeon 390

The 280x/380x are hd7970 but it does not seems to have any negative effect.

Bro, how did you manage to connect 8 AMD GPU's on Windows 10?

Thank you in advance for your response.

Have a great day.

He have dual GPUs in one card
used one pcie slot for one card = 2GPUs

correct

I have two HD7990 in that system.

[golden0707]

So what is regular speed with 280x with 1100/1500 clocks ?

Im getting 211-221 H/s on ver.10

Is it ok ?