[ANN] cudaMiner & ccMiner CUDA based mining applications [Windows/Linux/MacOSX]

[ManIkWeet]

Cudaminer work but only boooooo! , Never yay!!! .

Likely a problem with Stratum, or a very slow internet connection.
I don't think BTL is oficially supported yet.

[djm34]

Dont work cudaminer maxwell with BTL and my 2 750 ti

I try this pool :

http://btl.okaypool.com/

and this settings :

cudaminer.exe --algo=scrypt-jane:1394480376,4,30 -o stratum+tcp://btl11.okaypool.com:3369 -u xxx.1 -p xxx -l T120x24

Whats Wrong Help Pls .

The pool
Something I don't get, they release a pool but don't test it ? (this is a general comment, not necessarily for this pool)

[bigjme]

Last I saw, no pools were working

[vlax352]

any progres for cudamining heavycoin?

[myagui]

Would anyone have proper launch settings for 750ti (and/or also 770), for script-jane at nfactor11?
I suspect these have been posted already, but having no luck going through the forum search...

I'm currently doing about 58kh/s on each card, but I have no clue if this is far off, or good, or what...

My launch settings (K for the 770, T for the 750ti):
cudaminer.exe -a scrypt-jane:CACH -o stratum+tcp://somepool:someport -u someuser -p somepassword -i 0 -L 2 -l K96x2,T5x16

I got these from a couple of autotunes that would most times crash before it was done, and I ran autotune separately for one card at a time.

Cheers,
Myagui

[ghur]

Afaik the lowercase k kernel is preferred over the K kernel in that case. Same with t

[djm34]

what is exactly the purpose of the Kimoto Gravity Well ?

[GOLDbarISmine]

Would anyone have proper launch settings for 750ti (and/or also 770), for script-jane at nfactor11?
I suspect these have been posted already, but having no luck going through the forum search...

I'm currently doing about 58kh/s on each card, but I have no clue if this is far off, or good, or what...

My launch settings (K for the 770, T for the 750ti):
cudaminer.exe -a scrypt-jane:CACH -o stratum+tcp://somepool:someport -u someuser -p somepassword -i 0 -L 2 -l K96x2,T5x16

I got these from a couple of autotunes that would most times crash before it was done, and I ran autotune separately for one card at a time.

Cheers,
Myagui

for 770 is
-i 0 -h 2 -c 0 -m 0 -l K108x1

dont use Lookgap yet
and please not for what i observed n=11 has only 20% or ur regular scrypt haash 

[cbuchner1]

what is exactly the purpose of the Kimoto Gravity Well ?

Quick adaptation of the difficulty target even to very drastic changes to network hashing rates.

It prevents problems with insta-mining at launch (that could otherwise generate many blocks per minute)
and with multi-pools hopping onto the coin, and jumping off as quickly as they came.

Coins that don't do this tend to get in trouble quickly (see e.g. Aurora Coin which recently had trouble with really long confirmation times)

Christian

[myagui]

Afaik the lowercase k kernel is preferred over the K kernel in that case. Same with t

Have been trying with both, but haven't found a setting yet that shows any improvement with lowercase versus uppercase.
Thanks for the suggestion though, I might still get there!

for 770 is
-i 0 -h 2 -c 0 -m 0 -l K108x1

dont use Lookgap yet
and please not for what i observed n=11 has only 20% or ur regular scrypt haash  

This definitely improved my 770 hashing performance. Thanks!

- Myagui

[edit] Oh, 20% of scrypt performance, is roughly where I'm at now, so no need for much head scratching I suppose! Thanks again!

[thedude11]

Would anyone have proper launch settings for 750ti (and/or also 770), for script-jane at nfactor11?
I suspect these have been posted already, but having no luck going through the forum search...

I'm currently doing about 58kh/s on each card, but I have no clue if this is far off, or good, or what...

My launch settings (K for the 770, T for the 750ti):
cudaminer.exe -a scrypt-jane:CACH -o stratum+tcp://somepool:someport -u someuser -p somepassword -i 0 -L 2 -l K96x2,T5x16

I got these from a couple of autotunes that would most times crash before it was done, and I ran autotune separately for one card at a time.

Cheers,
Myagui

I get best results with t99x2 for my 750tis with -b 4096 -L 1 with n11. With that kernel I get 60-61 so your 58 is pretty close to what these cards get at this nfactor. Also try t128x2 could possibly get a few kHs more and try ocing it too.

[djm34]

http://dilbert.com/strips/comic/2014-03-12/

that's an idea.. I think there are a few phone with nvidia gpu's 

[ManIkWeet]

http://dilbert.com/strips/comic/2014-03-12/

that's an idea.. I think there are a few phone with nvidia gpu's  

Yes, but not with CUDA <<< dream smashing smiley

[cbuchner1]

any progres for cudamining heavycoin?

Making progress on a nightly basis (heh heh).  Remember that currently it's not cudaminer, but a separate project.

Christian

[bigjme]

Making progress on a nightly basis (heh heh).  Remember that currently it's not cudaminer, but a separate project.

Christian

cudaminer 2.0 

[djm34]

bitleu got finally a pool working.

[69charger]

any progres for cudamining heavycoin?

Making progress on a nightly basis (heh heh).  Remember that currently it's not cudaminer, but a separate project.

Christian

What hashrate are you expecting out of something like the 750ti?

[MCOnyx]

Anyone knows if the custom cudaminer for Execoin is really custom, or am i fine using newest "original" one from 28th?
And am I fine using my commands from Vertcoin? Thanks.

[btc21]

hi to all, i am a problem with cudaminer for Windows for mining LTC, i use a Nvidia GeForce GT 720M but should not be more than 40 Khs per minute , with -H 0 -i 1 -l auto -C 2 , any ideas?

http://s28.postimg.org/5qcobq13h/cuda.png

[cbuchner1]

any progres for cudamining heavycoin?

Making progress on a nightly basis (heh heh).  Remember that currently it's not cudaminer, but a separate project.

Christian

What hashrate are you expecting out of something like the 750ti?

currently we have no idea, as there's nothing running yet that includes all 5 types of hash.