damonack
Newbie
Offline
Activity: 3
Merit: 0
|
|
March 26, 2014, 02:55:31 PM |
|
God i think that my MSI GTX 770 is dying, the fan is making an awful noise and vibrating.. Maybe i pushed it too far setting the fan at 70% 24/7 don't worry, if the fan dies, you can still buy an aftermarket cooler the problem might be that you'd reject hot air in the case, though (that is if you use a normal case and not a crate) but you can find all-in-one watercooling blocks for gpus and use them on an exhaust of the case to prevent rebreathing hot air if you can't find any and it's too expencive, you can allways use some cpu all-in-one watercooling solutions if it's any cheaper and check for a tutorial on youtube
|
|
|
|
cbuchner1 (OP)
|
|
March 26, 2014, 03:33:43 PM Last edit: March 26, 2014, 05:04:05 PM by cbuchner1 |
|
Compile ccminer 0.4 with cuda 6.0, add options compile to CUDA command line -ftz=true -prec-div=false -prec-sqrt=false with compute_30,sm_30 For 2x750ti MSI + 660ti MSI on 1gh have:
I'll give it a try...back to reading page 130 it seems :p Hmm, the options " -ftz=true -prec-div=false -prec-sqrt=false" won't be of any use, as we have zero floating point arithmetics in the kernels. I would recommend against CUDA 6.0 (RC and final) because there is a performance regression problem in the compiler, making some kernels 30% slower compared to CUDA 5.5. it is likely the fix will only be available in CUDA 6.5. Christian
|
|
|
|
bigjme
|
|
March 26, 2014, 03:35:55 PM |
|
so you recommend to leave it as it is? just compile straight from github? EDIT: in fact i will just stick to the official releases unless you want something testing hope to see the -d command soon, as when my new cards come i want a different algo on each card, and to leave my 780 alone
|
Owner of: cudamining.co.uk
|
|
|
old_pioner
|
|
March 26, 2014, 04:42:00 PM |
|
How to make bat for Graphene? nfMin = 4 nfMax = 30 nTimeStamp = ???????????
cudaminer32.exe --algo=scrypt-jane -o http://url:port/ -u <username> -p <password>
|
|
|
|
billypit
Newbie
Offline
Activity: 7
Merit: 0
|
|
March 26, 2014, 04:54:23 PM Last edit: March 26, 2014, 05:07:49 PM by billypit |
|
How to make bat for Graphene? nfMin = 4 nfMax = 30 nTimeStamp = ???????????
cudaminer32.exe --algo=scrypt-jane -o http://url:port/ -u <username> -p <password> Tsiferki instead of questions will lay out at the time of start, maybe cudaminer --algo=scrypt-jane:??:4:30 -o x -u x -p x cudaminer -q -i 1,0 -l K8x12 --algo=scrypt-jane:??:4:30 -o http://127.0.0.1:5200 -u x -p x
|
|
|
|
|
Rasdisputin
Newbie
Offline
Activity: 39
Merit: 0
|
|
March 26, 2014, 05:07:55 PM |
|
Oh wow. It's a sloth eat sloth world out there... So many exchanges being hacked. Sounds like Atomic is pretty buttoned up and safe for the time being.
|
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
March 26, 2014, 05:12:22 PM |
|
How to make bat for Graphene? nfMin = 4 nfMax = 30 nTimeStamp = ???????????
cudaminer32.exe --algo=scrypt-jane -o http://url:port/ -u <username> -p <password> Tsiferki instead of questions will lay out at the time of start, maybe cudaminer --algo=scrypt-jane:??:4:30 -o x -u x -p x cudaminer -q -i 1,0 -l K8x12 --algo=scrypt-jane:??:4:30 -o http://127.0.0.1:5200 -u x -p x unless you know the factor at which they will start (if they start... ) leave cudaminer in autotune mode -lK. Otherwise, you are likely to crash...
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
Karma.ITM
|
|
March 26, 2014, 05:21:27 PM |
|
Is anyone else mining MaxCon with a 750ti? I'm having some difficulty in find settings that don't give just "boo!" all the time. The settings I've tried are the keccak ones mentioned in the main post in the below link as well as in the comments, all to no avail... http://cryptomining-blog.com/944-testing-geforce-gtx-750-ti-maxwell-for-alt-crypto-mining-with-cudaminer/-a keccak -i 0 -l K1000x24 -C 1 -H 0 The card isn't overclocked and I can mine Fugue, Yac, Heavy and plan old scrypt coins just fine. Any help will be much appreaciated
|
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
March 26, 2014, 05:23:41 PM |
|
Is anyone else mining MaxCon with a 750ti? I'm having some difficulty in find settings that don't give just "boo!" all the time. The settings I've tried are the keccak ones mentioned in the main post in the below link as well as in the comments, all to no avail... http://cryptomining-blog.com/944-testing-geforce-gtx-750-ti-maxwell-for-alt-crypto-mining-with-cudaminer/-a keccak -i 0 -l K1000x24 -C 1 -H 0 The card isn't overclocked and I can mine Fugue, Yac, Heavy and plan old scrypt coins just fine. Any help will be much appreaciated put -L1024 somewhere in the command line
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
March 26, 2014, 05:31:02 PM |
|
How to make bat for Graphene? nfMin = 4 nfMax = 30 nTimeStamp = ???????????
cudaminer32.exe --algo=scrypt-jane -o http://url:port/ -u <username> -p <password> Tsiferki instead of questions will lay out at the time of start, maybe cudaminer --algo=scrypt-jane:??:4:30 -o x -u x -p x cudaminer -q -i 1,0 -l K8x12 --algo=scrypt-jane:??:4:30 -o http://127.0.0.1:5200 -u x -p x unless you know the factor at which they will start (if they start... ) leave cudaminer in autotune mode -lK. Otherwise, you are likely to crash... wow, I am quoting myself... The launch is reported to tomorrow, the dev did give however the starttime: 1395744444 Anybody know how to get the Nfactor with what they will start with that ?
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
bigjme
|
|
March 26, 2014, 05:40:14 PM |
|
Starting nfactor should be the same as nfactormin
|
Owner of: cudamining.co.uk
|
|
|
Karma.ITM
|
|
March 26, 2014, 05:49:28 PM |
|
Is anyone else mining MaxCon with a 750ti? I'm having some difficulty in find settings that don't give just "boo!" all the time. The settings I've tried are the keccak ones mentioned in the main post in the below link as well as in the comments, all to no avail... http://cryptomining-blog.com/944-testing-geforce-gtx-750-ti-maxwell-for-alt-crypto-mining-with-cudaminer/-a keccak -i 0 -l K1000x24 -C 1 -H 0 The card isn't overclocked and I can mine Fugue, Yac, Heavy and plan old scrypt coins just fine. Any help will be much appreaciated put -L1024 somewhere in the command line I tried both -L1024 and also -L 1024 and it's still "boooo" at 75,000 kh/s
|
|
|
|
whitesand77
|
|
March 26, 2014, 06:00:37 PM |
|
Is anyone else mining MaxCon with a 750ti? I'm having some difficulty in find settings that don't give just "boo!" all the time. The settings I've tried are the keccak ones mentioned in the main post in the below link as well as in the comments, all to no avail... http://cryptomining-blog.com/944-testing-geforce-gtx-750-ti-maxwell-for-alt-crypto-mining-with-cudaminer/-a keccak -i 0 -l K1000x24 -C 1 -H 0 The card isn't overclocked and I can mine Fugue, Yac, Heavy and plan old scrypt coins just fine. Any help will be much appreaciated put -L1024 somewhere in the command line I tried both -L1024 and also -L 1024 and it's still "boooo" at 75,000 kh/s You might want to try -H 2, I think -H 0 is cpu only. And... use T1024x24 -L 1024
|
|
|
|
|
antonio8
Legendary
Offline
Activity: 1400
Merit: 1000
|
|
March 26, 2014, 07:27:43 PM |
|
Is anyone else mining MaxCon with a 750ti? I'm having some difficulty in find settings that don't give just "boo!" all the time. The settings I've tried are the keccak ones mentioned in the main post in the below link as well as in the comments, all to no avail... http://cryptomining-blog.com/944-testing-geforce-gtx-750-ti-maxwell-for-alt-crypto-mining-with-cudaminer/-a keccak -i 0 -l K1000x24 -C 1 -H 0 The card isn't overclocked and I can mine Fugue, Yac, Heavy and plan old scrypt coins just fine. Any help will be much appreaciated put -L1024 somewhere in the command line I tried both -L1024 and also -L 1024 and it's still "boooo" at 75,000 kh/s Unfortunately I am at work for the next 9 hours but when I get home I'll put in my bat. I run about 164k on my 750ti's with keccac.
|
If you are going to leave your BTC on an exchange please send it to this address instead 1GH3ub3UUHbU5qDJW5u3E9jZ96ZEmzaXtG, I will at least use the money better than someone who steals it from the exchange. Thanks
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
March 26, 2014, 07:49:39 PM |
|
Is anyone else mining MaxCon with a 750ti? I'm having some difficulty in find settings that don't give just "boo!" all the time. The settings I've tried are the keccak ones mentioned in the main post in the below link as well as in the comments, all to no avail... http://cryptomining-blog.com/944-testing-geforce-gtx-750-ti-maxwell-for-alt-crypto-mining-with-cudaminer/-a keccak -i 0 -l K1000x24 -C 1 -H 0 The card isn't overclocked and I can mine Fugue, Yac, Heavy and plan old scrypt coins just fine. Any help will be much appreaciated put -L1024 somewhere in the command line I tried both -L1024 and also -L 1024 and it's still "boooo" at 75,000 kh/s Unfortunately I am at work for the next 9 hours but when I get home I'll put in my bat. I run about 164k on my 750ti's with keccac. where are you mining ?
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
Rasdisputin
Newbie
Offline
Activity: 39
Merit: 0
|
|
March 26, 2014, 08:13:38 PM |
|
Is there a way to auto close, and then immediately restart cudaminer if the time between accepted shares is too great? My share rate is suffering horribly because of random pauses. If I close cudaminer and restart it, it works again for a while. If I can't alter this behavior, I'd like to work around it.
|
|
|
|
I_M
|
|
March 26, 2014, 08:23:08 PM |
|
Is there a way to auto close, and then immediately restart cudaminer if the time between accepted shares is too great? My share rate is suffering horribly because of random pauses. If I close cudaminer and restart it, it works again for a while. If I can't alter this behavior, I'd like to work around it.
Sounds like a vardiff problem with the pool you're using.
|
|
|
|
cbuchner1 (OP)
|
|
March 26, 2014, 08:37:43 PM |
|
The other Christian says we're now doing 9000 kHash/s with a 750Ti on HVC.
He eliminated all branching and warp divergence from the "divergent" HEFTY1 algorithm. Apparently it wasn't hefty enough to thwart us.
Oh, by the way this beats a AMD R9 290X
Christian
|
|
|
|
|