jpl
Member
 Offline
Activity: 154
Merit: 11
|
 |
September 29, 2017, 04:47:26 AM |
|
Would love to see those figures  Could you please help me, have a rig with 4x1050ti+2x1060 6 Gb, EBWF freezes and soon restarts computer without error code. Guess no HW error, same rig runs smoothly on ETH, all 6 cards working fine. Tried to disable 2x1060, enable and lower intensity, disable 4x1050, run rig without afterburner, no advance... Make sure you get the name correct to run.. its ewbf I made the same mistake initially. |
|
|
|
|
qualitas
Newbie
Offline
Activity: 4
Merit: 0
|
|
September 29, 2017, 08:24:50 AM
Last edit: September 29, 2017, 08:56:36 AM by qualitas |
|
Regarding the above view. Is there a way to have all my rigs show up on one browser using the API command?
I did some quick testing to see what I could come up with, and for my setup it works OK. <!DOCTYPE html>
<html>
<body style="background-color:#000000;">
<iframe src="http://IP.OF.RIG.1:42000" height="350" width="900" style="border:none;">
<p>Your browser does not support iframes.</p>
</iframe>
<iframe src="http://IP.OF.RIG.2:42000" height="350" width="900" style="border:none;">
<p>Your browser does not support iframes.</p>
</iframe>
</body>
</html>
Edit the IP.OF.RIG.X, save as "whatever-you-want.html" and see if it fits your needs Copy/paste the iframe block to add more rigs <iframe src="http://IP.OF.RIG.X:42000" height="350" width="900" style="border:none;">
<p>Your browser does not support iframes.</p>
</iframe>
EDIT: This only works if you have actually added the API line in the startup file for your miner. --api ip.of.rig.1:42000 - the actual IP and not letting it default to 127.0.0.1 for local access only. And for remote rigs, you will need to use the external IP and set up port forwarding to get it to show EDIT 2: You may want to change the 350 limit on height - running a few rigs with only 2 cards each, so rigs with more then 2 cards may need some more space then that. Thanks @Red_Yoda for the suggestion earlier in the thread here Disclaimer - I'm running this on a 1080x1920 monitor (i.e flipped to portrait mode) so I get the rigs listed separately one after the other, pretty much like the original API shows them. - If I'm opening the html file on one of my 1920x1080 landscape screens or my 2K / 4K screens they show up next to each other until the top row is filled and then the next one(s) show up on next row. This can be adjusted by increasing the width to a larger number if you would prefer them listed one by one under each other. |
|
|
|
|
pokeytex
Legendary
Offline
Activity: 1504
Merit: 1002
|
|
September 29, 2017, 09:11:19 AM |
|
Regarding the above view. Is there a way to have all my rigs show up on one browser using the API command?
I did some quick testing to see what I could come up with, and for my setup it works OK. <!DOCTYPE html>
<html>
<body style="background-color:#000000;">
<iframe src="http://IP.OF.RIG.1:42000" height="350" width="900" style="border:none;">
<p>Your browser does not support iframes.</p>
</iframe>
<iframe src="http://IP.OF.RIG.2:42000" height="350" width="900" style="border:none;">
<p>Your browser does not support iframes.</p>
</iframe>
</body>
</html>
Edit the IP.OF.RIG.X, save as "whatever-you-want.html" and see if it fits your needs Copy/paste the iframe block to add more rigs <iframe src="http://IP.OF.RIG.X:42000" height="350" width="900" style="border:none;">
<p>Your browser does not support iframes.</p>
</iframe>
EDIT: This only works if you have actually added the API line in the startup file for your miner. --api ip.of.rig.1:42000 - the actual IP and not letting it default to 127.0.0.1 for local access only. And for remote rigs, you will need to use the external IP and set up port forwarding to get it to show EDIT 2: You may want to change the 350 limit on height - running a few rigs with only 2 cards each, so rigs with more then 2 cards may need some more space then that. Thanks @Red_Yoda for the suggestion earlier in the thread here Disclaimer - I'm running this on a 1080x1920 monitor (i.e flipped to portrait mode) so I get the rigs listed separately one after the other, pretty much like the original API shows them. - If I'm opening the html file on one of my 1920x1080 landscape screens or my 2K / 4K screens they show up next to each other until the top row is filled and then the next one(s) show up on next row. This can be adjusted by increasing the width to a larger number if you would prefer them listed one by one under each other. @qualitas - Thank you for the suggestion. I will give it a go this weekend. |
|
|
|
|
Munz77
|
|
September 29, 2017, 09:15:35 AM |
|
I'm trying to download the file from mega and google drive as per links on page 1, but windows keeps picking up virus and wont download. Anyone have a link?
|
|
|
|
|
mikebzh44
Newbie
Offline
Activity: 64
Merit: 0
|
|
September 29, 2017, 12:41:38 PM |
|
Thanks for the response. How are you running so cool? I am getting 70's across the board. Fan set to auto. Please don't tell me 100% fan speed Fans are set to 70% but my rig is in my utility room near my garage and I have 4 140mm fan (2 blowing fresh air from behind the cards and 2 blowing on the top of the cards |
|
|
|
|
wstealth
Newbie
Offline
Activity: 37
Merit: 0
|
|
September 29, 2017, 02:16:10 PM |
|
Hi guys, The miner is not really stable in my environment - the rig with 6 of GTX 1070. Sometimes, once a day or once in 2 days, the mining is broken because of different errors (#77 or #46) and the hashrate becomes zero. That's why I set up the monitoring system. My first monitoring system was a cloud system that monitors the workers activity on the mining pool through API. And in case of low hashrate, it sends an email. Then, when I see that email, I can remotely access my rig PC and manually restart the miner. But that system had the problems - because the refresh rate of the mining pool API could be even 30 min, the email comes with a long delay. The second problem is manual interaction - I can't physically restart the miner immediately at 3am. So, I decided to build an automated system to monitor the miner. And finally it's done - it is MinerKeeper. Please check this blog post or see the GitHub repository directly. I hope it will also be very useful for you, as it is very useful for me. |
|
|
|
|
MDMurdock
Newbie
Offline
Activity: 6
Merit: 0
|
 |
September 29, 2017, 03:35:01 PM |
|
New to crypto mining and zcash. Can the users with more experience give me a sense of how my rig is doing performance wise? https://imgur.com/a/lXujf |
|
|
|
|
tazmako
Full Member
Offline
Activity: 350
Merit: 100
XDNA - Most innovative cryptocurrency in 2018
|
|
September 29, 2017, 06:40:58 PM |
|
New to crypto mining and zcash. Can the users with more experience give me a sense of how my rig is doing performance wise? https://imgur.com/a/lXujfi think it looking great. |
|
|
|
wstealth
Newbie
Offline
Activity: 37
Merit: 0
|
|
September 29, 2017, 06:48:57 PM
Last edit: September 29, 2017, 07:27:20 PM by wstealth |
|
New to crypto mining and zcash. Can the users with more experience give me a sense of how my rig is doing performance wise? https://imgur.com/a/lXujfI have in average 440 Sol/s but 116W per each 1070 card. What OC settings are you using? |
|
|
|
|
MDMurdock
Newbie
Offline
Activity: 6
Merit: 0
|
|
September 29, 2017, 07:56:43 PM |
|
New to crypto mining and zcash. Can the users with more experience give me a sense of how my rig is doing performance wise? https://imgur.com/a/lXujfI have in average 440 Sol/s but 116W per each 1070 card. What OC settings are you using? From reading here today, my OC settings are probably a little unorthodox, but I'm at 68% Power, +105 Core and +599 RAM. |
|
|
|
|
Jonny Utah
Newbie
Offline
Activity: 1
Merit: 0
|
|
September 30, 2017, 01:29:44 AM |
|
I just bought a 1070 last week to try mining for a bit. I'm getting about 440h/s mining zcash with EWBF's 0.3.4b. Do you think I should buy 6 more 1070s right now or wait till the new Volta GPUS are released?
Thanks
|
|
|
|
|
|
lentyna
|
|
September 30, 2017, 02:37:53 AM |
|
What hashrate are you guys getting on 1080ti 11GB?
My settings: GPU +180, MEM -500 Power 75%
I'm getting 665-675 Sol/s per card.
What settings are you using if you are getting better than this?
|
|
|
|
|
jpl
Member
Offline
Activity: 154
Merit: 11
|
|
September 30, 2017, 03:42:16 AM
Last edit: October 04, 2017, 03:37:48 AM by jpl |
|
Why are these Antminers getting such high reviews? Are they faster than EWBF?
...edit.. I guess these are old since no response.
|
|
|
|
|
QuintLeo
Legendary
Offline
Activity: 1498
Merit: 1030
|
|
September 30, 2017, 04:12:07 AM |
|
New to crypto mining and zcash. Can the users with more experience give me a sense of how my rig is doing performance wise? https://imgur.com/a/lXujfI have in average 440 Sol/s but 116W per each 1070 card. What OC settings are you using? From reading here today, my OC settings are probably a little unorthodox, but I'm at 68% Power, +105 Core and +599 RAM. 68% power is a meaningless statement without the model of the card - the stock TDP on a 1070 can vary a LOT, many at 150 watts many at 180 at least one MSI 1070 model has a stock TDP over 200 watts (and 2 power connectors). +core is also meaningless for the same reason. +memory is USUALLY useful, most NVidia GDDR5 cards base clock the RAM at 8000 and most GDDR5X cards at 10000, but even THERE exceptions exist. To jpl - which Antminers are you talking about getting high reviews? There is no such thing as an Antminer that will mine ZEC or offshoot coins (at least yet). |
I'm no longer legendary just in my own mind!
Like something I said? Donations gratefully accepted. LYLnTKvLefz9izJFUvEGQEZzSkz34b3N6U (Litecoin)
1GYbjMTPdCuV7dci3iCUiaRrcNuaiQrVYY (Bitcoin)
|
|
|
matmator
Sr. Member
Offline
Activity: 487
Merit: 252
bou !
|
|
September 30, 2017, 09:16:52 AM |
|
Hello, is there a command to restart automatically the minor in case of gpu error?  |
go to the moon !!
|
|
|
matmator
Sr. Member
Offline
Activity: 487
Merit: 252
bou !
|
|
September 30, 2017, 10:12:58 AM |
|
Hi guys, The miner is not really stable in my environment - the rig with 6 of GTX 1070. Sometimes, once a day or once in 2 days, the mining is broken because of different errors (#77 or #46) and the hashrate becomes zero. That's why I set up the monitoring system. My first monitoring system was a cloud system that monitors the workers activity on the mining pool through API. And in case of low hashrate, it sends an email. Then, when I see that email, I can remotely access my rig PC and manually restart the miner. But that system had the problems - because the refresh rate of the mining pool API could be even 30 min, the email comes with a long delay. The second problem is manual interaction - I can't physically restart the miner immediately at 3am. So, I decided to build an automated system to monitor the miner. And finally it's done - it is MinerKeeper. Please check this blog post or see the GitHub repository directly. I hope it will also be very useful for you, as it is very useful for me. how do you use your program? copy the files to the minor's folder? |
go to the moon !!
|
|
|
tazmako
Full Member
Offline
Activity: 350
Merit: 100
XDNA - Most innovative cryptocurrency in 2018
|
|
September 30, 2017, 10:48:04 AM |
|
I just bought a 1070 last week to try mining for a bit. I'm getting about 440h/s mining zcash with EWBF's 0.3.4b. Do you think I should buy 6 more 1070s right now or wait till the new Volta GPUS are released?
Thanks
you should wait for 1070ti it coming around 27oct. i think 1070ti have around 550-600sol or more |
|
|
|
wstealth
Newbie
Offline
Activity: 37
Merit: 0
|
|
September 30, 2017, 11:34:22 AM |
|
Hi guys, The miner is not really stable in my environment - the rig with 6 of GTX 1070. Sometimes, once a day or once in 2 days, the mining is broken because of different errors (#77 or #46) and the hashrate becomes zero. That's why I set up the monitoring system. My first monitoring system was a cloud system that monitors the workers activity on the mining pool through API. And in case of low hashrate, it sends an email. Then, when I see that email, I can remotely access my rig PC and manually restart the miner. But that system had the problems - because the refresh rate of the mining pool API could be even 30 min, the email comes with a long delay. The second problem is manual interaction - I can't physically restart the miner immediately at 3am. So, I decided to build an automated system to monitor the miner. And finally it's done - it is MinerKeeper. Please check this blog post or see the GitHub repository directly. I hope it will also be very useful for you, as it is very useful for me. how do you use your program? copy the files to the minor's folder? Just extract the archive somewhere, and change the configuration in config.json file. And run MinerKeeper.exe - it will start miner automatically. You can find the details here |
|
|
|
|
klintistwood
Full Member
Offline
Activity: 157
Merit: 100
Out of the box is where I live
|
|
September 30, 2017, 12:29:36 PM |
|
Hello all, I'm new in here. I used to mine ETH but profit has gone down so now I'm trying out Zcash. Here are stats from my rig:  GPU Temp Power Speed Efficiency Accepted Rejected GeForce GTX 1060 3GB 51 C 66 W 237 Sol/s 3.59 Sol/W 36 0 GeForce GTX 1060 3GB 56 C 74 W 250 Sol/s 3.38 Sol/W 50 0 GeForce GTX 1060 3GB 55 C 70 W 237 Sol/s 3.39 Sol/W 37 0 GeForce GTX 1060 3GB 56 C 73 W 248 Sol/s 3.40 Sol/W 39 0 GeForce GTX 1060 3GB 56 C 76 W 268 Sol/s 3.53 Sol/W 47 0 GeForce GTX 1060 3GB 51 C 77 W 265 Sol/s 3.44 Sol/W 35 0 GeForce GTX 1060 3GB 60 C 75 W 237 Sol/s 3.16 Sol/W 45 0 GeForce GTX 1060 3GB 51 C 74 W 270 Sol/s 3.65 Sol/W 44 0 GeForce GTX 1060 3GB 52 C 73 W 255 Sol/s 3.49 Sol/W 47 0 GeForce GTX 1060 3GB 49 C 72 W 258 Sol/s 3.58 Sol/W 45 0 I have reduced power to 75W for all cards. Efficiency looks ok but I haven't managed to increase sol/s by a significant amount unless I remove the power limit. If I don't use power limit, sol/s go up to around 3000 but power consumption goes to 1200W. I have tried to play with memory frequency but the effect is close to nothing. When I was mining ETH, memory frequency had a direct impact on performance, ZEC seems different. Thanks |
|
|
|
matmator
Sr. Member
Offline
Activity: 487
Merit: 252
bou !
|
|
September 30, 2017, 12:30:50 PM |
|
Hi guys, The miner is not really stable in my environment - the rig with 6 of GTX 1070. Sometimes, once a day or once in 2 days, the mining is broken because of different errors (#77 or #46) and the hashrate becomes zero. That's why I set up the monitoring system. My first monitoring system was a cloud system that monitors the workers activity on the mining pool through API. And in case of low hashrate, it sends an email. Then, when I see that email, I can remotely access my rig PC and manually restart the miner. But that system had the problems - because the refresh rate of the mining pool API could be even 30 min, the email comes with a long delay. The second problem is manual interaction - I can't physically restart the miner immediately at 3am. So, I decided to build an automated system to monitor the miner. And finally it's done - it is MinerKeeper. Please check this blog post or see the GitHub repository directly. I hope it will also be very useful for you, as it is very useful for me. how do you use your program? copy the files to the minor's folder? Just extract the archive somewhere, and change the configuration in config.json file. And run MinerKeeper.exe - it will start miner automatically. You can find the details hereI do not have a config.json file |
go to the moon !!
|
|
|
|
