▂▃▅▆▇⫷[🆉🅿🅾🅾🅻.🅲🅰]⫸⫷[!Paying 10 FLUX PA's!]⫸⫷[ the miners multipool ]⫸▇▆▅▃▂

[zimkan]

Has anybody Decred as most profitable coin in awesomeminer, and no income on zpool with it?

[logistyc]

Hi!

NemosMiner-v2.3c-beta
Loading BTC rate from 'api.coinbase.com'..
Loading pool stats..
Error contacting pool, retrying..

Maybe something happened with the pool?

[JaredKaragen]

Hi!

NemosMiner-v2.3c-beta
Loading BTC rate from 'api.coinbase.com'..
Loading pool stats..
Error contacting pool, retrying..

Maybe something happened with the pool?

Not sure, im seeing API online, and miners connected:
http://zpool.ca/?address=1kLsGT9egk3utSKZH46ydTbKj5oMnmBoN

how often are you re-checking the stats in your config?  Might play a part, but not sure personally.   The nemosminer thread may be a better place to ask about this type of question.

[logistyc]

how often are you re-checking the stats in your config?  Might play a part, but not sure personally.   The nemosminer thread may be a better place to ask about this type of question.
[/quote]
Not found this option(
Thank you!
Ask on the forum NEMOSMINER!

[logistyc]

Lol! Only You told me and it worked) Thanks again! JaredKaragen!

[tws]

Nist5 is acting up again. 70-ish MH/s reported by the miner, and only 2-ish MH/s shows up in web interface.
It's exactly as it was a couple of days ago, before Nist5 pool was reported to be fixed.

yup, it's broken again  

So I am using awesome miner and zpool and having the same issue where it’s only eporting about 2 MH/s does that mean I should mine something else or am I getting what my miner is saying?

x17 reporting wrong hash too in the site...I think we should wait for an OP answer or target other pool.

Seems like the hash rate is working better now...

[tws]

Has anybody Decred as most profitable coin in awesomeminer, and no income on zpool with it?

Good question, All I know is mine is on profit switching an usually mines nist5, Lyra, or Blake now I’m new so not sure..

[thel3lue]

https://imgur.com/a/2yQ61

this ninja is show 0 mbtc that mean no income?

[Junkbarman]

What's with Veltor coin sitting unconfirmed? 2days now and sitting unconfirmed?

[jb7032]

@crackfoo- Any chance you would consider fetching LTC as a secondary major pay out option? I don't want to mine straight to an exchange wallet and trying to move BTC is beyond painful at this point. My rigs were making ~$100 a day and if I try to move ~$1000 its like $150 in fees due to all the small inputs.

[CIBERUS]

@crackfoo- Any chance you would consider fetching LTC as a secondary major pay out option? I don't want to mine straight to an exchange wallet and trying to move BTC is beyond painful at this point. My rigs were making ~$100 a day and if I try to move ~$1000 its like $150 in fees due to all the small inputs.

try using a btc segwit address, it's way cheaper than core, it's start with 3xxxxxxxxxxx

[jb7032]

I have a segwit address. The problem is the estimated size of my transactions is so high that it makes me spend way more then normal. Not sure if there is a way around it but it shows that I have many inputs to a transaction which makes the cost go up.

[rockmoney]

Hello all and Merry Christmas!
I'm new and making all the newbie mistakes. I have been trying to get my gekkscience 2pacs to work on this pool using the cgminer that was suggested. I have tried using this address, please let me know what I have done incorrectly, because all I see is "stratum from pool 0 requested restart", and New block found. It seems that there is no time for any shares to be accepted. This is also running on a Raspberry pi 3, if that helps.

./cgminer -o stratum+tcp://sha256.mine.zpool.ca:3333 -u my address -p c=mycoin,sha256 --suggest-diff 32 --gekko-2pac-freq 200

I have tried variations of c=mycoin,sha256,d=xxx or d_xxx.

If someone could tell me what I did wrong, that would be awesome, or if I'm using the incorrect program (the example is ccminer) and have been wracking my brain over this, please let me know.
Thank you.

Those sticks will find maybe 1 share a day due to their low hash rates, in the end you will burn more power than they earn.

Not sure where you are getting your information from regarding the GekkoScience 2PAC USB miners - those sticks can run all day and night at 18+GH/s with extreme efficiency! Based on your comment, I highly doubt you are familiar with those sticks because they will find shares in seconds when used correctly. My 2PAC sticks have paid for themselves tenfold by mining lower difficulty coins that have since become valuable.


@kugr - I replied to your message regarding your issue, and you should have no problems if you make the few small changes I suggested. Let me know if you're still having trouble, but you should be all good now! 

[aarons6]

Hello all and Merry Christmas!
I'm new and making all the newbie mistakes. I have been trying to get my gekkscience 2pacs to work on this pool using the cgminer that was suggested. I have tried using this address, please let me know what I have done incorrectly, because all I see is "stratum from pool 0 requested restart", and New block found. It seems that there is no time for any shares to be accepted. This is also running on a Raspberry pi 3, if that helps.

./cgminer -o stratum+tcp://sha256.mine.zpool.ca:3333 -u my address -p c=mycoin,sha256 --suggest-diff 32 --gekko-2pac-freq 200

I have tried variations of c=mycoin,sha256,d=xxx or d_xxx.

If someone could tell me what I did wrong, that would be awesome, or if I'm using the incorrect program (the example is ccminer) and have been wracking my brain over this, please let me know.
Thank you.

Those sticks will find maybe 1 share a day due to their low hash rates, in the end you will burn more power than they earn.

Not sure where you are getting your information from regarding the GekkoScience 2PAC USB miners - those sticks can run all day and night at 18+GH/s with extreme efficiency! Based on your comment, I highly doubt you are familiar with those sticks because they will find shares in seconds when used correctly. My 2PAC sticks have paid for themselves tenfold by mining lower difficulty coins that have since become valuable.


@kugr - I replied to your message regarding your issue, and you should have no problems if you make the few small changes I suggested. Let me know if you're still having trouble, but you should be all good now! 

no currently the diff is broken for sha256 and scrypt..
here is my compacs
cgminer/4.10.0   c=XVG,d=32   sha256   32768   

as you can see, the diff is set to 32, yet its actually 32768.. which means i get about 1 share per hour.. maybe longer..
and my moonlanders.
bfgminer/5.2.0-188-g   c=XVG,d=1024   scrypt   32768   

same thing..

[eleutherios]

hi guys, can i ask what to put in c=XBT or BTC?
i am mining zcoin with bitcoin address at kraken 

[gregfromo]

hi guys, can i ask what to put in c=XBT or BTC?
i am mining zcoin with bitcoin address at kraken 

BTC

[Summer2017]

Hi,

i would like to mine the Unbreakable (UNB) coin with my S9.
But how i have to make the config? Can you pay the Unbreakable (UNB) to my wallet or did you change it to BCT ?
Wow mutch ist the transaction cost?

THX for anny help

[crackfoo]

Hi,

i would like to mine the Unbreakable (UNB) coin with my S9.
But how i have to make the config? Can you pay the Unbreakable (UNB) to my wallet or did you change it to BCT ?
Wow mutch ist the transaction cost?

THX for anny help

host: sha256.mine.zpool.ca:3333
user: YourUNBwallet
pass: c=UNB

[bttalkdim2]

Is now all OK with stats ? Or some delay ?
My 3 rigs now more than 2 hours mining mostly "veltor"
and no any blocks in "Last 50 Earnings".

[crackfoo]

Is now all OK with stats ? Or some delay ?
My 3 rigs now more than 2 hours mining mostly "veltor"
and no any blocks in "Last 50 Earnings".

last VLT block was 4h ago so thats why. can sometimes be a long time between blocks. adjust your scripts accordingly.