▂▃▅▆▇⫷[🆉🅿🅾🅾🅻.🅲🅰]⫸⫷[!Paying 10 FLUX PA's!]⫸⫷[ the miners multipool ]⫸▇▆▅▃▂

[garandhero]

Does yescrypt work on nvidia cards?

[malthrax]

Does yescrypt work on nvidia cards?

no, its CPU only

[B3dr0ck]

Hi,

i would like to mine the coin with my S9 Antminer an i test this config.

stratum+tcp://sha256.mine.zpool.ca:3333
my BTC wallet adress
c=UNB

is this wrong ? because the S9 say

stratum+tcp://sha256.mine.zpool.ca:3333   my BTC wallet adress  Dead .


can anybody help me plase.

I have this exact same problem  (I use c=BTC)
I tried to remove stratum+tcp:// too same thing

[datminer]

How do I find out which algorithm is the most profitable to mine on zpool, is this shown somewhere on the website? I understand that there is some Algo switching features, but if I just want to simply see what is most profitable right now (or top 3), how would I do that?

[Antnoob]

Hi,

i would like to mine the coin with my S9 Antminer an i test this config.

stratum+tcp://sha256.mine.zpool.ca:3333
my BTC wallet adress
c=UNB

is this wrong ? because the S9 say

stratum+tcp://sha256.mine.zpool.ca:3333   my BTC wallet adress  Dead .


can anybody help me plase.

I have this exact same problem  (I use c=BTC)
I tried to remove stratum+tcp:// too same thing

Yes, c= means in what currency you want to get paid ... I also came here to ask is there a password parameter that can lock you to a single coint to mine (but get paid in another).

So, devs, or anyone else? Is there such option here? In Prohashing c= shows the coin you want to mine specifically, here we saw already it's not the case ...

[DDon]

Hi Crackfoo, I noticed yesterdays payout for the first time I received less than what was sent,  I have always received the exact figure listed in the zpool payouts window.  yesterday it said payout (in BTC)   0.00281416     but I received  0.00251416 to my wallet


http://img2.picload.org/image/dddoaoga/e2.png

http://img2.picload.org/image/dddoaoga/e1.png

[crackfoo]

Hi Crackfoo, I noticed yesterdays payout for the first time I received less than what was sent,  I have always received the exact figure listed in the zpool payouts window.  yesterday it said payout (in BTC)   0.00281416     but I received  0.00251416 to my wallet

In the history of over 100k+ tx sent by the pool over the past couple years  you’d be the first to experience this so forgive me if I totally don’t believe you. But alas, you’re going to make me check the txid on the blockchain arnt you?

Wallet address?

[jwarren81]

No you can't specify what coin you want to mine, just what coin you want to be paid in (if there are enough blocks being found to pay you out).  The whole point of a multipool is to always be mining the most profitable coin, so being able to choose one is pointless.

Hi,

i would like to mine the coin with my S9 Antminer an i test this config.

stratum+tcp://sha256.mine.zpool.ca:3333
my BTC wallet adress
c=UNB

is this wrong ? because the S9 say

stratum+tcp://sha256.mine.zpool.ca:3333   my BTC wallet adress  Dead .


can anybody help me plase.

I have this exact same problem  (I use c=BTC)
I tried to remove stratum+tcp:// too same thing

Yes, c= means in what currency you want to get paid ... I also came here to ask is there a password parameter that can lock you to a single coint to mine (but get paid in another).

So, devs, or anyone else? Is there such option here? In Prohashing c= shows the coin you want to mine specifically, here we saw already it's not the case ...

[HTML5 Gordon]

this ninja is show 0 mbtc that mean no income?

I am seeing this as well.



I guess I will stop mining lyra2v2 for now, as I don't want my rigs doing work for no reason.

[jwarren81]

It's a merge mined coin, which means it is mined alongside other coins at no cost to you.  There are no exchanges for it therefore you receive no profit for it, but it didn't cost you any extra work.  You can safely ignore any that show auxPOW.

this ninja is show 0 mbtc that mean no income?

I am seeing this as well.



I guess I will stop mining lyra2v2 for now, as I don't want my rigs doing work for no reason.

[HTML5 Gordon]

It's a merge mined coin, which means it is mined alongside other coins at no cost to you.  There are no exchanges for it therefore you receive no profit for it, but it didn't cost you any extra work.  You can safely ignore any that show auxPOW.

this ninja is show 0 mbtc that mean no income?

I am seeing this as well.



I guess I will stop mining lyra2v2 for now, as I don't want my rigs doing work for no reason.

Ah, good to know.  Thanks for the explanation!

[aarons6]

so instead of lowering the diff you raised it??

cgminer/4.10.0   c=XVG,d=32   sha256   262144      -

this means my compacs will never find a share.. i guess i will need to find a new pool :/

[happie]

Can I use my segwit BTC address (3B4fKR...) on zpool? Would like to be paid out to my new wallet.

This was answered a page or 2 back by crackfoo.

And the answer was? I can't find it...

Can someone give me a yes or no answer please?

[tws]

Need some help, I use awesome miner and have it pointed to zpool I am wondering why the profit estimate on awesome miner varies so much and does not seem to match what shows up on zpool total earned.

Also I am wondering is it better to just let the auto profit work and change to differing coins every 30 min or find one coin and min that?

https://www.dropbox.com/s/cp6o2gp3bjnjw04/Screenshot%202017-12-27%2017.29.24.png?dl=0

[aarons6]

HI guys

Please suggest what difficulty to use for antminer s9 on zpool

the diff right now seems to be locked at
262144

which is way too high..

my s3s and s5s cant even connect.. they get disconnected and switch to the failover pool..

my compacs just chug along and never send in a share.


im guessing he doesnt want anything but s9s on his pool.

[GoRdiE]

Hi, A few days ago I included the -p c = BTC in the miner, but I still get the following message

https://imgur.com/V6Ugok5

And the miner is:

https://imgur.com/lnC06UN

Any solutions?

Regards

There should NOT be any SPACES in the string.   "-p c=BTC"  not  "-p c = BTC"


Please post the COMPLETE command-line you're running.

No spaces.. sorry

ccminer.exe  -a x17 -o stratum+tcp://x17.mine.zpool.ca:3737 -u <my wallet> -p c=BTC -b 0.0.0.0:4028

Hi crackfoo

some help? My wallet in BTC, please

1B4YgKDKZL9wwNWQEQdx416TtHZi4n43G5

Thanks a lot

[aarons6]

HI guys

Please suggest what difficulty to use for antminer s9 on zpool

the diff right now seems to be locked at
262144

which is way too high..

my s3s and s5s cant even connect.. they get disconnected and switch to the failover pool..

my compacs just chug along and never send in a share.


im guessing he doesnt want anything but s9s on his pool.

My diff is 262144 which is set automatically by the pool because i dont know which right diif set in my password field

And once in two hours my asic reboots by awesomeminer because he it lack of accept progress

yep.. but there is no way to set the diff anymore..
putting d= doesnt change anything

[garandhero]

Another day, another challenge....

Trying to get nsgminer.exe working for Neoscrypt, but I keep getting the following errors;

"Pool 0 is hiding block contents from us"
"Pool 0 is sending mismatched block content to us"
"Stratum from Pool 0 requested work restart"

Because of this, it's unusable and won't benchmark.

Here's my my nsgminer.txt;  I tried adding the g 1 -w 128 -I 16 and it didn't do anything....I am running GTX 1070's and 1060s on 2 separate rigs.  Please advise!

[
    {
        "Type":  "NVIDIA",
        "Path":  ".\\Bin\\Nsgminer\\nsgminer.exe",
        "Arguments":  "--api-port 24028 --api-listen --neoscrypt -g 1 -w 128 -I 16 -o stratum+tcp://$($Pools.NeoScrypt.Host):$($Pools.NeoScrypt.Port) -u $($Pools.NeoScrypt.User) -p $($Pools.NeoScrypt.Pass) --gpu-threads 1 --worksize 64 --intensity 11 --thread-concurrency 64 --gpu-platform $([array]::IndexOf(([OpenCl.Platform]::GetPlatformIDs() | Select-Object -ExpandProperty Vendor), 'NVIDIA Corporation'))",
        "HashRates":  {"NeoScrypt":  "$($Stats.NsgminerNvidia_NeoScrypt_HashRate.Week)"},
        "API":  "Xgminer",
        "Port":  "24028",
        "Wrap":  false,
        "URI":  "https://github.com/ghostlander/nsgminer/releases/download/nsgminer-v0.9.2/nsgminer-win64-0.9.2.zip"
    }
]

[cryptominer420]

Another day, another challenge....

Trying to get nsgminer.exe working for Neoscrypt, but I keep getting the following errors;

"Pool 0 is hiding block contents from us"
"Pool 0 is sending mismatched block content to us"
"Stratum from Pool 0 requested work restart"

Because of this, it's unusable and won't benchmark.

Here's my my nsgminer.txt;  I tried adding the g 1 -w 128 -I 16 and it didn't do anything....I am running GTX 1070's and 1060s on 2 separate rigs.  Please advise!

[
    {
        "Type":  "NVIDIA",
        "Path":  ".\\Bin\\Nsgminer\\nsgminer.exe",
        "Arguments":  "--api-port 24028 --api-listen --neoscrypt -g 1 -w 128 -I 16 -o stratum+tcp://$($Pools.NeoScrypt.Host):$($Pools.NeoScrypt.Port) -u $($Pools.NeoScrypt.User) -p $($Pools.NeoScrypt.Pass) --gpu-threads 1 --worksize 64 --intensity 11 --thread-concurrency 64 --gpu-platform $([array]::IndexOf(([OpenCl.Platform]::GetPlatformIDs() | Select-Object -ExpandProperty Vendor), 'NVIDIA Corporation'))",
        "HashRates":  {"NeoScrypt":  "$($Stats.NsgminerNvidia_NeoScrypt_HashRate.Week)"},
        "API":  "Xgminer",
        "Port":  "24028",
        "Wrap":  false,
        "URI":  "https://github.com/ghostlander/nsgminer/releases/download/nsgminer-v0.9.2/nsgminer-win64-0.9.2.zip"
    }
]

use ccminer it works much better for nvidia cards.

[garandhero]

Another day, another challenge....

Trying to get nsgminer.exe working for Neoscrypt, but I keep getting the following errors;

"Pool 0 is hiding block contents from us"
"Pool 0 is sending mismatched block content to us"
"Stratum from Pool 0 requested work restart"

Because of this, it's unusable and won't benchmark.

Here's my my nsgminer.txt;  I tried adding the g 1 -w 128 -I 16 and it didn't do anything....I am running GTX 1070's and 1060s on 2 separate rigs.  Please advise!

[
    {
        "Type":  "NVIDIA",
        "Path":  ".\\Bin\\Nsgminer\\nsgminer.exe",
        "Arguments":  "--api-port 24028 --api-listen --neoscrypt -g 1 -w 128 -I 16 -o stratum+tcp://$($Pools.NeoScrypt.Host):$($Pools.NeoScrypt.Port) -u $($Pools.NeoScrypt.User) -p $($Pools.NeoScrypt.Pass) --gpu-threads 1 --worksize 64 --intensity 11 --thread-concurrency 64 --gpu-platform $([array]::IndexOf(([OpenCl.Platform]::GetPlatformIDs() | Select-Object -ExpandProperty Vendor), 'NVIDIA Corporation'))",
        "HashRates":  {"NeoScrypt":  "$($Stats.NsgminerNvidia_NeoScrypt_HashRate.Week)"},
        "API":  "Xgminer",
        "Port":  "24028",
        "Wrap":  false,
        "URI":  "https://github.com/ghostlander/nsgminer/releases/download/nsgminer-v0.9.2/nsgminer-win64-0.9.2.zip"
    }
]

use ccminer it works much better for nvidia cards.

Fair enough, I just removed the nsgminer.txt file from my miners folder....is that right?