▂▃▅▆▇⫷[🆉🅿🅾🅾🅻.🅲🅰]⫸⫷[!Paying 10 FLUX PA's!]⫸⫷[ the miners multipool ]⫸▇▆▅▃▂

[jefer2018]

Hello, my zpool has stopped mining a few hours ago, I try to reactivate the miners and remain giving failure "stratum_recv_line failed", can you help me please?

Print: http://prntscr.com/hzohzr
Wallet: 1CHYHvRgeUJran6VNMQJcCTR2N4WGxFdgn

[ibixable]

How is Verge now as I have some sitting my wallet for most of the day. I am worried about pointing my miners back to it?  Is the x17 pool healthy and paying properly?

[Westerminer]

I have a problem with Zpool
I will have 24 Halcyon coins (HAL) and stopped because 48 hours have not been deposited my payment in cryptopia. Where am I going wrong? Or what do I need to do to get paid? My cryptopia address is correct.
I'm in the thick of an answer.

Oh geez I’m not sure. There must be a clue on your wallet stats??

Post your address.

Thanks

My adress: HNNBerUbBRMH1LMTBWCTTZMkXmJec7SJAC  ( Cryptopia )

[stangerm2]

It's recommended to use BTC as any other coin could be removed at anytime and payouts will not occur.

Right this is clear on the home page, but if you look at the SHA-256 status page BCH is just blank. No last day/week/month info. It just makes it seem like it's dead and I didn't know if it was pulled from the pool.

[Skvery]

Please confirm that c=DOGE is working on zpool.

c-:

[GoldKimber]

XVG wallet update needs a wallet re-index so they're syncing now. x17 is off-line until they're synced.

F***! This zero point zero zero business...

https://imgur.com/a/nS1SG

At 591563 mBTC/MH/day...  Frickin hook me up BRO!!!

I know you are just keeping all that for yourself.   

[Riptide_NVN]

How is Verge now as I have some sitting my wallet for most of the day. I am worried about pointing my miners back to it?  Is the x17 pool healthy and paying properly?

There is a tweet up stating to switch over to another currency if you are being paid in XVG.  Since I want to get paid in XVG I am on my backup pool right now.  Hopefully they get this fixed up in a few days so I can move back over to zpool.

[GoldKimber]

Hello.

Any chance you guys can check the UIS wallet in Lyra2r2?

I believe I should have just had a payout of 40 UIS sent in the past 10 minutes or so, but do not see a Txn ID showing up yet.

In case there is a technical problem, I didn't want to wait too long to raise this concern.

Thanks for checking.

Wallet: UkoDdbPoFzL2VyKxXTdyV7DoQFT3UMe7cV

-GK

[GoldKimber]

Hello.

Any chance you guys can check the UIS wallet in Lyra2r2?

I believe I should have just had a payout of 40 UIS sent in the past 10 minutes or so, but do not see a Txn ID showing up yet.

In case there is a technical problem, I didn't want to wait too long to raise this concern.

Thanks for checking.

Wallet: UkoDdbPoFzL2VyKxXTdyV7DoQFT3UMe7cV

-GK

There it went!  Yay!!   Looks to be a 25 min delay.  Not sure if that's normal?  Sorry for the noob questions.

I also see my Verge wallet finally got paid.  I know there are ongoing tech issues there...  So thank you for that too!!

Much Appreciated.

[Riptide_NVN]

X17 is up again and I've been mining XVG a few hours.

Total Unpaid seems to be growing but not Balance.  Perhaps consequently payouts aren't being made.

Am I wasting my time?

[hoosierdoc]

trying to start mining Gobyte but failing to get data. Here's my command

ccminer-x64 -o stratum+tcp://neoscrypt.mine.zpool.ca:4233 -u GLiuKcnctDCEeYxLvnnzMKmLVqz1GWGhsk.miner1 -p c=GBX -D

here's the result. Any ideas???

C:\mine\ccminer>ccminer-x64 -o stratum+tcp://neoscrypt.mine.zpool.ca:4233 -u GLiuKcnctDCEeYxLvnnzMKmLVqz1GWGhsk.miner1 -p c=GBX -D
*** ccminer 2.2.4 for nVidia GPUs by tpruvot@github ***
    Built with VC++ 2013 and nVidia CUDA SDK 9.0 64-bits

  Originally based on Christian Buchner and Christian H. project
  Include some kernels from alexis78, djm34, djEzo, tsiv and krnlx.

BTC donation address: 1AJdfCpLWPNoAMDfHF1wD5y8VgKSSTHxPo (tpruvot)

[2018-01-13 02:02:33] POOL 0: neoscrypt.mine.zpool.ca:4233 USER GLiuKcnctDCEeYxLvnnzMKmLVqz1GWGhsk.miner1 -s 10
[2018-01-13 02:02:33] Starting on stratum+tcp://neoscrypt.mine.zpool.ca:4233
[2018-01-13 02:02:33] restart_threads
[2018-01-13 02:02:33] CUDA GPU 0 matches NVML GPU 0 by busId 1
[2018-01-13 02:02:33] CUDA GPU 1 matches NVML GPU 1 by busId 4
[2018-01-13 02:02:33] NVML GPU monitoring enabled.
[2018-01-13 02:02:33] CUDA GPU 0 matches NVAPI GPU 0 by busId 1
[2018-01-13 02:02:33] CUDA GPU 1 matches NVAPI GPU 1 by busId 4
[2018-01-13 02:02:33] NVAPI GPU monitoring enabled.
[2018-01-13 02:02:33] 2 miner threads started, using 'auto' algorithm.
[2018-01-13 02:02:33] Binding thread 0 to cpu 0 (mask 1)
[2018-01-13 02:02:33] Binding thread 1 to cpu 1 (mask 2)
[2018-01-13 02:02:34] sleeptime: 500 ms
[2018-01-13 02:02:34] sleeptime: 500 ms
[2018-01-13 02:02:35] GPU #0: no data
[2018-01-13 02:02:35] GPU #1: no data

[Skvery]

c=LTC works but c=DOGE or c=DGE produce Digibyte?

How do I auto-exchange to DOGE?

Please confirm that c=DOGE is working on zpool.

c-:

[alnash]

@crackfoo
Does your pool accept nicehash connections? Are there any requirements, dedicated ports or something?
I wouldn't want to pay to 1000 nicehash miners for a Tb/day just to learn that the pool bans them because of "spam" or whatever...

[variable42]

X17 is up again and I've been mining XVG a few hours.

Total Unpaid seems to be growing but not Balance.  Perhaps consequently payouts aren't being made.

Am I wasting my time?

No, you're not wasting your time. XVG blocks are just taking a while to confirm. Which means you'll see up to an hour between the time your unpaid balance increases and when your balance increases for each block.

[Westerminer]

Anybody can help me? I have a problem with Zpool!

I will have 24 Halcyon coins (HAL) and stopped because 48 hours have not been deposited my payment in cryptopia. Where am I going wrong? Or what do I need to do to get paid? My cryptopia address is correct. Check with my address and see what can be

my adress: HNNBerUbBRMH1LMTBWCTTZMkXmJec7SJAC  ( Cryptopia )

I'm in the thick of an answer.

Thanks

[GoldKimber]

Anybody can help me? I have a problem with Zpool!

I will have 24 Halcyon coins (HAL) and stopped because 48 hours have not been deposited my payment in cryptopia. Where am I going wrong? Or what do I need to do to get paid? My cryptopia address is correct. Check with my address and see what can be

my adress: HNNBerUbBRMH1LMTBWCTTZMkXmJec7SJAC  ( Cryptopia )

I'm in the thick of an answer.

Thanks

I was going to mine to a couple Cryptopia addresses... but their site posted messages saying not to mine to their addresses because they don't support certain protocols... blah, blah, blah... so I never tried it.  Didn't want to lose my day's pay.

Anyone else on here mining to Cryptopia addresses successfully?

BTW - this is why I'm having to sling UIS around the world before sending it home.

Good Luck.  I hope you get your problem fixed.

GK

[Westerminer]

Anybody can help me? I have a problem with Zpool!

I will have 24 Halcyon coins (HAL) and stopped because 48 hours have not been deposited my payment in cryptopia. Where am I going wrong? Or what do I need to do to get paid? My cryptopia address is correct. Check with my address and see what can be

my adress: HNNBerUbBRMH1LMTBWCTTZMkXmJec7SJAC  ( Cryptopia )

I'm in the thick of an answer.

Thanks

I was going to mine to a couple Cryptopia addresses... but their site posted messages saying not to mine to their addresses because they don't support certain protocols... blah, blah, blah... so I never tried it.  Didn't want to lose my day's pay.

Anyone else on here mining to Cryptopia addresses successfully?

BTW - this is why I'm having to sling UIS around the world before sending it home.

Good Luck.  I hope you get your problem fixed.

GK

I miner Zclassic with cryptopia address and never had problems. It was only using this Zpool that the payment does not leave there. Which Zpool support is it?

[crackfoo]

Anybody can help me? I have a problem with Zpool!

I will have 24 Halcyon coins (HAL) and stopped because 48 hours have not been deposited my payment in cryptopia. Where am I going wrong? Or what do I need to do to get paid? My cryptopia address is correct. Check with my address and see what can be

my adress: HNNBerUbBRMH1LMTBWCTTZMkXmJec7SJAC  ( Cryptopia )

I'm in the thick of an answer.

Thanks

I was going to mine to a couple Cryptopia addresses... but their site posted messages saying not to mine to their addresses because they don't support certain protocols... blah, blah, blah... so I never tried it.  Didn't want to lose my day's pay.

Anyone else on here mining to Cryptopia addresses successfully?

BTW - this is why I'm having to sling UIS around the world before sending it home.

Good Luck.  I hope you get your problem fixed.

GK

I miner Zclassic with cryptopia address and never had problems. It was only using this Zpool that the payment does not leave there. Which Zpool support is it?

it's really quite self-explanatory. Do you not every check your stats on the pool?? Or read the info on the main page?

http://zpool.ca/?address=HNNBerUbBRMH1LMTBWCTTZMkXmJec7SJAC

[malthrax]

@crackfoo
Does your pool accept nicehash connections? Are there any requirements, dedicated ports or something?
I wouldn't want to pay to 1000 nicehash miners for a Tb/day just to learn that the pool bans them because of "spam" or whatever...

Set up a stratum proxy to point your 1,000 nicehack bot-net at - that way @Zpool won't have to clean up the mess, and you won't boot the rest of us off the pool.

[crackfoo]

@crackfoo
Does your pool accept nicehash connections? Are there any requirements, dedicated ports or something?
I wouldn't want to pay to 1000 nicehash miners for a Tb/day just to learn that the pool bans them because of "spam" or whatever...

yeah nicehack is fine. I've yet to see anyone push that many miners from NH and anyway they would all be from the same IP's. The botnet's I've banned had thousands of different IP's from different locations. Clearly they have some malware/trojans on computers which they now can control.